- Jun 29, 2017
-
-
Yero1990 authored
-Rename some axes labels for clarity, and put useful comments regarding the cuts that were made to obtain good variables (#156)
-
Mark K Jones authored
Add calibration code for the SHMS aerogel detector
-
Carlos Yero authored
-
Mark K Jones authored
-Added "Good": Occupancy, Multiplicity, ADC Pulse Pedestals/Times/int…
-
- Jun 28, 2017
-
-
Carlos Yero authored
-Added "Good": Occupancy, Multiplicity, ADC Pulse Pedestals/Times/integrals/amplitudes, TdcUncorrTimes, TdcCorrTime, and TdcTOFCorrTimes to the hodoscope test stand def file
-
- Jun 26, 2017
-
-
Eric Pooser authored
-
- Jun 25, 2017
-
-
Eric Pooser authored
* Add summer 2017 software analysis workshop example * Add summer 2017 software analysis workshop example for real this time
-
Ryan-Ambrose authored
* May 26, 2017 -- Long overdue push, some old Calibration Scripts but also the presently working analysis and Calibration scripts in Final Scripts directory. * Updated Calibration with pulseAmp script. * root file * added Rootfiles * Rewrote pulseAmp analysis, works much better now. Included Degtiarenko's code to evaluate as a better alternative. Started the write up for the actual calibration process * Updated Analysis scripts, started deciphering Fortran code. * test * TEST * test * bla * blah * boring git stuff * git stuff * Made the master branch much more organized/presentable * Finializing directory. Modified how calibration appears/output the calibration constants * Updated the analysis and visualization scripts for NGC. * Version of Calibration suitable for the Summer presentation. * Removed debugging line
-
- Jun 24, 2017
-
-
Mark K Jones authored
Modify TEMPLATES/pstackana.template
-
Carlos Yero authored
1) Added information on time of run and BCMs 2) Conversion of BCM scalers to current is done with constants roughly determined from data. Eventually need to update to use parameters.
-
- Jun 22, 2017
-
-
Carlos Yero authored
choosing an event range.
-
- Jun 19, 2017
-
-
Yero1990 authored
-
- Jun 18, 2017
-
-
Yero1990 authored
* minor fixes to shms dc calib * Changed the binning scheme in the shms calibrations such that at 0 ns (tzero-corrected) will be centerd about its corresponding bin, and not at an edge.
-
Yero1990 authored
-
Mark K Jones authored
Dc calib
-
Carlos Yero authored
new script to apply the tzero correction as the plane drift times are filled. For each entry filled, the corresponding wire and plane hit are obtained, and the tzero corresponding to the wire hit is applied.
-
Carlos Yero authored
-
Carlos Yero authored
-
- Jun 17, 2017
-
-
Yero1990 authored
changed SHMS DC binning to be consistent with calibration. Changed 2ns/bin to 1ns/bin in drift time histos. (#145)
-
- Jun 16, 2017
-
-
Yero1990 authored
* commented out a cout line * increased the total number of bins by two, since the bin width was reduced from 2ns to 1ns. This change produced better drift distances * reduced drift time bin width to 1ns. * reduced bin width to 1 ns/bin * reduced bin width to 1 ns /bin * Updated parameter files
-
Eric Pooser authored
-
Mark K Jones authored
Shms dc calib
-
Carlos Yero authored
-
Carlos Yero authored
-
Yero1990 authored
* added README file * added README.md file for SHMS DC Calibrations * Added readme file for shms dc calibration * Added minor fix to the script to fix compilationerror in root 5.34.36 * minor fix * get_tzero_per_wire_param.C * fix to be compatible with root 5.34.36 * fix minor issues * added stricter restriction on good t0 selection
-
- Jun 15, 2017
-
-
Yero1990 authored
* added option to read input file and event number to loop over * added option to read input file and number of entries to analyze * swapped x:y axes in 2d plots to display drift times vs. wire number, and added labels to the axes * minor change in output file name * added option to read filename, and changed the naming scheme of the output .root and .dat files produced * added option to read input file and number of events, also changed naming of input and output .dat files to be consistent with the other changes made so far. * added option to read input file and number of entries * added option to read input file and number of events, and also added axes titles to histos * added option to read input file and numberof events, also modified name of .root file being read * added axes titles to histos * added option to promt user to enter input file, run number, and number events to analyze. Also made a few improvements overall
-
- Jun 14, 2017
-
-
Mark K Jones authored
New optics reconstruction matrix for KPP run
-
Carlos Yero authored
COSY was run with Q2 set to 0.985*( ideal setting) which better matches the focal plane distributions. New optics reconstruction matrix.
-
Yero1990 authored
* -added script that will output a parameter file with individual tzero values (NOT per ribbon cable as before) * -included the execution of 'get_tzero_per_wire.param' in steering script. * -added precicion to the t0 calculation. Although the calculation involved the ratios of two 'doubles', the t0 came out to be an integer. This imprecision was corrected. * -add minor fix * added minor fix to read in corrected t0 values * minor fix * most up-to-date shms DC param files
-
- Jun 13, 2017
-
-
Mark K Jones authored
Modify HMS and SHMS calorimeter calibration codes
-
Carlos Yero authored
latest naming conventions in hcana code. Change of tree branch names in THcShowerCalib.h and THcPShowerCalib.h.
-
- Jun 12, 2017
-
-
Yero1990 authored
* -Modified HMS Calorimeter Def-File Based on SHMS Calo Def File * -Minor Fix to hms calo def file -added h_fadc_debug.param to HMS Calorimeter general Parameters -loaded fadc_debug param file in hms calorimeter test stand replay script
-
- Jun 11, 2017
-
-
Yero1990 authored
* -added the lines to read run number to the top of the script. * -Modified SHMS DC DEF FILE to display drift times with binning scheme same as used in calib. -Added the most up-to-date shms dc parameters obtained from the modified shms dc calib. script * -set option to use per_wire tzero ON.
-
Yero1990 authored
* -added a few lines of code to produce a weighted tzero data file per wire basis, where the weight is by groups (ribbon cables) * -started to add lines to read per-wire tzero parameter data file. (work in progress) * -mofidied plane numbering in 'get_zero_param.C' to match the rest of the calibration script plane numbering scheme * -minor fix * -script that reads a data file containing the per wire tzeros -the tzero correction is applies on a wire-by-wire basis and the wire drift times are added to produce the corrected plane drift times * minor modifications to name of file being read * -minor modifications to file name being read
-
- Jun 09, 2017
-
-
Yero1990 authored
per wire basis, where the weight is by groups (ribbon cables)
-
- Jun 08, 2017
-
-
Yero1990 authored
* initialied script for writing individual wire tzero values into a parameter file * script to add tzero param * -added statement that explicitly assigns a tzero value of zero if certain criteria are not met, rather than leaving a blank line. * -Added boolean operator to determine ribbon cable group and looped over each ribbon cable group corresponding to shms planes DC 1U1 and DC 1U2, so far. ...Work in Progress to calculate weighted average t0 per ribbon cable. * -script that gets tzero values per ribbon cable and writes out a param file with the tzero values on a wire basis. * -made few modifications (still not complete) * -added dynamic array that holds the group value (5 or 7) for each plane * SHMS DC Calibration script that takes the weighted average tzero per ribbon cable, and produces a parameter file containing the weighted average tzero per ribbon cable group, expressed on a wire-by-wire basis. * -added lines to read in run number from a text file * -added line to execute 'get_tzero_param.C' which creates a parameter file with updated tzero values.
-
- Jun 06, 2017
-
-
Yero1990 authored
run_Cal.C commented out some boolean statements producing that were producing a compilaton error. Commented out execution of script update_pdcparam.C, as it is obsolete, since we will be using a new paramerer file containing individual wire tzero. get_pdc_time_histo.C commented out obsolete lines that created some directories wire_drift_times.C declared 'wirenum' variable outside of loop to solve the "use of undeclared identifier" compilation error get_wire_tzero.C moved several variable declarations outside the loop over sensewires to solve "use of undeclared identifier" compilation error get_LookUp_Values.C minor syntax error fix.
-
- May 30, 2017
-
-
Yero1990 authored
* -Modified HMS Calorimeter Def-File Based on SHMS Calo Def File * -Minor Fix to hms calo def file -added h_fadc_debug.param to HMS Calorimeter general Parameters -loaded fadc_debug param file in hms calorimeter test stand replay script
-
Mark K Jones authored
Shms def file develop
-
Ak1508 authored
-