1) Add X,Y offsets parameter for each plane, instead of X,Y offset per chamber
2) ModifyTHcDriftChamber::CorrectHitTimes to work with SHMS chambers
3) Add GetReadoutSide method to THcDCHit class.

Main purpose is to calculate the DC efficiency per wire
using the track information of the golden track.


THcDC.h
-----------
1) add method EfficiciencyPerWire
2) Add variables fWire_hit_did and fWire_hit_should

THcDC.cxx
------------
1) fWire_hit_did and fWire_hit_should are fixed length arrays
   the size of NPlanes that in set in method Init
2) Add variables wireHitDid and wireHitShould to the tree
3) In method SetFocalPlaneBestTrack add call to EfficiencyPerWire method
4) added EfficiencyPerWire method which loops over the hits
    and compares the wire number for the hit to the the track
    position at the plane (convert back to wire number).
    Then fills fWire_hit_did with the wire number if
    equal to the wire position of the hit equals the track.
    Also does loop over all planes and fills fWire_hit_should
    with the wire number of the track in each plane.

THcDriftChamberPlane.h and cxx
---------------------
1) Added method CalcWireFromPos

The purpose is to add a call in THcHallCSpectrometer:TrackCalc
to fill variables in THcDC for the golden track.

THcHallCSpectrometer.h
----------------------
1) Add object THcDC* fDC
2) Eliminate object fShower since it was not being used.

THcHallCSpectrometer.cxx
----------------------
1) in ReadDatabase method cast fDC in detector "dc" is defined
2) in FindVertices method add call
    to fDC->SetFocalPlaneBestTrack(hit_gold_track)
    where hit_gold_track is the HaTracks array index
    of the golden track

THcDC.h
-------
1) Add method SetFocalPlaneBestTrack

THcDC.cxx
---------
1) Eliminate filling of best focal plane quantities
   in CoarseTrack which defined "best" by lowest chi2
2) Create method SetFocalPlaneBestTrack
   a)fills the best focal plane quantities using the golden track
   b) fills fResiduals using golden track

Add variables fX_fp_best,fY_fp_best,fXp_fp_best,fYp_fp_best to THcDC.h
Modified THcDC::CoarseTrack so that the variables are filled with the
quantities from the track with the smallest chi-squared.
Modified THcDC::TrackFit so that the fResidual per plane is filled with
for the track with the lowest chi-squared.
Modified THcDC::DefineVariables so that access the variables as
dc.x_fp,dc.y_fp,dc.xp_fp and dc.yp_fp

Applied changes in several files to reflect this.
Minor fix in `THcRawHodoHit`.

When calculating the residuals, consider all track candidates instead of only the first track.  Moreover, eliminate the instances when there was no hit in a plane then the residual was returned as zero.

  Otherwise InitHistlist doesn't have the detector map
  and can't do setup of reference time stuff or sanity checks on the
  detector mapping

Some detector classes lacked the ability to get the appropriate
Apparatus character and were only working for HMS.

  Modify THcFormula and THcParmList to match changes to THaFormula
     (needed for reports)
  Small changes in THcInterface and detector classes for compatibility
     with new OO decoder and podd 1.6

  When it was UInt_t, variable length global variables didn't get the
  length correctly and there were run time errors.

  For the most part this is making sure that the loop variable in
  a for loop is of the same type as the variable that it is compared
  against (Often a UInt_t).

This reverts commit e9ce1040.

Conflicts:
	src/THcHallCSpectrometer.cxx

  For the most part this is making sure that the loop variable in
  a for loop is of the same type as the variable that it is compared
  against (Often a UInt_t).

Found when doing valgrind --tool=memcheck --track-origins=yes --leak-check=full hcana
Return errors like below
==14467== Invalid write of size 1
==14467==    at 0x4A0794F: __GI_strcpy (mc_replace_strmem.c:313)
==14467==    by 0x57137A3: THcHodoscope::Setup(char const*, char const*) (THcHodoscope.cxx:112)
==14467==    by 0x5713A7E: THcHodoscope::Init(TDatime const&) (THcHodoscope.cxx:142)
==14467==    by 0x4D38C29: THaApparatus::Init(TDatime const&) (THaApparatus.C:193)
==14467==    by 0x4D67E57: THaAnalyzer::InitModules(TList const*, TDatime&, int, char const*) (THaAnalyzer.C:433)
==14467==    by 0x4D68B1F: THaAnalyzer::DoInit(THaRunBase*) (THaAnalyzer.C:667)
==14467==    by 0x4D68126: THaAnalyzer::Init(THaRunBase*) (THaAnalyzer.C:467)
==14467==    by 0x4D6B31A: THaAnalyzer::Process(THaRunBase*) (THaAnalyzer.C:1289)
==14467==    by 0x4E21E97: G__haDict_704_0_6(G__value*, char const*, G__param*, int) (haDict.C:23491)
==14467==    by 0x6DB6148: Cint::G__ExceptionWrapper(int (*)(G__value*, char const*, G__param*, int), G__value*, char*, G__param*, int) (in /u/apps/root/5.34.13/root/lib/libCint.so.5.34)
==14467==    by 0x6E5A3A0: G__execute_call (in /u/apps/root/5.34.13/root/lib/libCint.so.5.34)
==14467==    by 0x6E5B201: G__call_cppfunc (in /u/apps/root/5.34.13/root/lib/libCint.so.5.34)
==14467==  Address 0xd7636a2 is 0 bytes after a block of size 2 alloc'd
==14467==    at 0x4A0674C: operator new[](unsigned long) (vg_replace_malloc.c:305)
==14467==    by 0x5713757: THcHodoscope::Setup(char const*, char const*) (THcHodoscope.cxx:111)
==14467==    by 0x5713A7E: THcHodoscope::Init(TDatime const&) (THcHodoscope.cxx:142)
==14467==    by 0x4D38C29: THaApparatus::Init(TDatime const&) (THaApparatus.C:193)
==14467==    by 0x4D67E57: THaAnalyzer::InitModules(TList const*, TDatime&, int, char const*) (THaAnalyzer.C:433)
==14467==    by 0x4D68B1F: THaAnalyzer::DoInit(THaRunBase*) (THaAnalyzer.C:667)
==14467==    by 0x4D68126: THaAnalyzer::Init(THaRunBase*) (THaAnalyzer.C:467)
==14467==    by 0x4D6B31A: THaAnalyzer::Process(THaRunBase*) (THaAnalyzer.C:1289)
==14467==    by 0x4E21E97: G__haDict_704_0_6(G__value*, char const*, G__param*, int) (haDict.C:23491)
==14467==    by 0x6DB6148: Cint::G__ExceptionWrapper(int (*)(G__value*, char const*, G__param*, int), G__value*, char*, G__param*, int) (in /u/apps/root/5

In tree they are called tnhit and trawhit.
Created two new variables for THcDriftChamber, fNthits and fN_True_RawHits.
In tree they are called tnhit and trawhit.
THcDC defined subdetector THcDriftChamber to have name Ch1 and Ch2 to do used in the tree.
THcDriftChamberPlane defined new method GetNRawhits to return fNRawhits for each plane.
Added member fNRawhits to THcDriftChamberPlane

add flags debugflagpr and debugflagstubs
add method THcDC::PrintStubs
modify THcDC::PrintSpacePoints
Set THcDC::LinkStubs() to only set fNDCTracks=0 and retrun when
  fNDCTracks>10 for HMS style chambers to match engine.

  Fix from Mark Jones with additional cleanup for
  saw's misunderstanding of space point criterion

  THcDriftChamber::AddPlane didn't know if style was HMS, because
  style was only determined in Init.  Now fHMSStyleFlag is set in
  only one place.  Right now determined from spectrometer name, but
  could be a parameter in the future.

With fdebugprintdecodeddc call Chambers[i]->PrintDecode() to output the drift chamber info after min/max time cuts
Added PrintSpacePoints()
With fdebugprintdecodeddc call PrintSpacePoints() to output drift chmaber spacepoint info

  THcDriftChamber
    New flag fHMSStyleChambers to determine if HMS or SOS style
    tracking should be done.  Flag is set on if the spectrometer
    name begins with 'h'.
    THcDriftChamber::LeftRight fSmallAngleApprox must be set and
    fHMSStyleChambers must be off to do SOS style.
    If not HMS style, ignore all the Yplane optimizations
  THcDC
    SOS code does "project to chamber" in link stubs.  Need to evaluate
    if this is necessary, or if HMS style should also do it.

These were related to a) scope of some variable declarations, and b) use
of pre-increment vs. post-increment of non-primitive types (this has a
slight performance hit due to the way that pre- vs. post-increment
operators are overloaded in C++.

Also cleaned up a few places where initialized variables were not being
used.

  Clone some DC tests from ENGINE test files to podd
  style cuts.  Make changes to source code to support these tests.
  Correct hits in plane line in example report file.

    Added variables using ENGINE names
       gen_run_number
       gen_run_starting_event
       gen_event_id_number