Shms dc calib

* added README file

* added README.md file for SHMS DC Calibrations

* Added readme file for shms dc calibration

* Added minor fix to the script to fix compilationerror in root 5.34.36

* minor fix

* get_tzero_per_wire_param.C

* fix to be compatible with root 5.34.36

* fix minor issues

* added stricter restriction on good t0 selection

* added option to read input file and event number to loop over

* added option to read input file and number of entries to analyze

* swapped x:y axes in 2d plots to display drift times vs. wire number, and added labels to the axes

* minor change in output file name

* added option to read filename, and changed the naming scheme of the output .root and .dat files produced

* added option to read input file and number of events, also changed naming of input and output .dat files to be consistent with the other changes made so far.

* added option to read input file and number of entries

* added option to read input file and number of events, and also added axes titles to histos

* added option to read input file and numberof events, also modified name of .root file being read

* added axes titles to histos

* added option to promt user to enter input file, run number, and number events to analyze. Also made a few improvements overall

New optics reconstruction matrix for KPP run

COSY was run with Q2 set to 0.985*( ideal setting)
which better matches the focal plane distributions.
New optics reconstruction matrix.

* -added script that will output a parameter file with individual tzero values (NOT per ribbon cable as before)

* -included the execution of 'get_tzero_per_wire.param' in steering script.

* -added precicion to the t0 calculation. Although the calculation involved the ratios of two 'doubles', the t0 came out to be an integer. This imprecision was corrected.

* -add minor fix

* added minor fix to read in corrected t0 values

* minor fix

* most up-to-date shms DC param files

Modify HMS and SHMS calorimeter calibration codes

latest naming conventions in hcana code.

       Change of tree branch names in THcShowerCalib.h and
       THcPShowerCalib.h.

* -Modified HMS Calorimeter Def-File Based on SHMS Calo Def File

* -Minor Fix to hms calo def file
-added h_fadc_debug.param to HMS Calorimeter general Parameters
-loaded fadc_debug param file in hms calorimeter test stand replay script

* -added the lines to read run number to the top of the script.

* -Modified SHMS DC DEF FILE to display drift times with binning scheme same as used in calib.
-Added the most up-to-date shms dc parameters obtained from the modified shms dc calib. script

* -set option to use per_wire tzero ON.

* -added a few lines of code to produce a weighted tzero data file
per wire basis, where the weight is by groups (ribbon cables)

* -started to add lines to read per-wire tzero parameter data file. (work in progress)

* -mofidied plane numbering in 'get_zero_param.C' to match the rest of the
calibration script plane numbering scheme

* -minor fix

* -script that reads a data file containing the per wire tzeros
-the tzero correction is applies on a wire-by-wire basis and the
wire drift times are added to produce the corrected plane drift times

* minor modifications to name of file being read

* -minor modifications to file name being read

per wire basis, where the weight is by groups (ribbon cables)

* initialied script for writing individual wire tzero values into a parameter file

* script to add tzero param

* -added statement that explicitly assigns a tzero value of zero if certain criteria are not met, rather than leaving a blank line.

* -Added boolean operator to determine ribbon cable group and looped over
each ribbon cable group corresponding to shms planes DC 1U1 and DC 1U2, so far.
...Work in Progress to calculate weighted average t0 per ribbon cable.

* -script that gets tzero values per ribbon cable and writes out a param file
with the tzero values on a wire basis.

* -made few modifications (still not complete)

* -added dynamic array that holds the group value (5 or 7) for each plane

* SHMS DC Calibration script that takes the weighted average tzero per ribbon cable, and produces a parameter file containing the weighted average tzero per ribbon cable group, expressed on a wire-by-wire basis.

* -added lines to read in run number from a text file

* -added line to execute 'get_tzero_param.C' which creates a parameter
file with updated tzero values.

run_Cal.C          commented out some boolean statements producing
                   that were producing a compilaton error. Commented out
                   execution of script update_pdcparam.C, as it is obsolete,
                   since we will be using a new paramerer file containing
                   individual wire tzero.

get_pdc_time_histo.C  commented out obsolete lines that created some directories

wire_drift_times.C  declared 'wirenum' variable outside of loop to solve the
                    "use of undeclared identifier" compilation error

get_wire_tzero.C    moved several variable declarations outside the loop
		    over sensewires to solve  "use of undeclared identifier"
		    compilation error

get_LookUp_Values.C minor syntax error fix.

* -Modified HMS Calorimeter Def-File Based on SHMS Calo Def File

* -Minor Fix to hms calo def file
-added h_fadc_debug.param to HMS Calorimeter general Parameters
-loaded fadc_debug param file in hms calorimeter test stand replay script

Shms def file develop

* -Added the fAdcTimeWindowMin/Max parameter values per plane for the hms/shms h(p)hodo.param file

* -added comments to SHMS/HMS hodo.param file

* modified SHMS DC def file

* modified SHMS DC Def file

SHMS PreShower

* -modified hms cer def files
-added hms_cer f_adc_debug.param to hms_cer gen param
-added hms_cer f_adc_debug option to the hms_cer_replay script.

* created HMS CER online Config file fr onlineGUI

-added hms_cer f_adc_debug.param to hms_cer gen param
-added hms_cer f_adc_debug option to the hms_cer_replay script.

so that the axes match the actual PMT Numbers.

included statistics box in some histograms.

* modified SHMS HGCER Def File and created new Congig File for HGCER onlineGUI test stand

* modified histos in NGC Def Files and created a test stand NGC configuration file for the onlineGUI

* Added new histograms for SHMA Aero DEF Files and created Config script for
aerogel online GUI test stand

* Modified SHMS HGC, NGC and AERO DEF Files Histogram Titles and Binning.
Modified SHMS AERO replay script to include f_adc_debug_param option.

Scaler replay and online GUI

Added files
------------
DBASE/db_HSScalerevt.dat : scaler database for HMS
DBASE/db_PSScalerevt.dat : scaler database for SHMS
DBASE/make_scaler_db.py  : Python script to make HMS and SHMS
                           database files from xscaler scaler.map
SCRIPTS/HMS/replay_hms_scalers.C : script to replay HMS scalers only
SCRIPTS/SHMS/replay_shms_scalers.C : script to replay SHMS scalers only
DEF-files/HMS/EPICS/epics_short.def : List of EPICS variables to include in Tree
                                      used in scaler scripts as an example
onlineGUI/Config/hms_scaler.cfg  : configuration file to plot HMS scalers
onlineGUI/Macros/plot_hms_scaler.C  : Macro used by hms_scaler.cfg

onlineGUI/Config/shms_scaler.cfg  : configuration file to plot SHMS scalers
onlineGUI/Macros/plot_shms_scaler.C  : Macro used by shms_scaler.cfg

Fix bug in kpp macro

* Macro to determine the wire efficiencies per wire

* parameter file to be used with wire_efficiency.C macro

* Modified HMS DC WireMap

* modify wiremap in hdc.map file

* created combined map files

* Delete wire_efficiency.C

* Delete hms_dc.param

Def files