Use HALLC_MODS in make file to turn on Hall C changes in Podd.
  Remove unneeded and now broken includes of THaDB.h.

   {prefix}dc_fix_lr
        Historically, in the ENGINE, if a hit is used in multiple
        space points/stubs, the left/right assignment for that hit, which
        is later used in track fitting, is that assigned for the last stub
        encountered with that hit.  Properly, the left right assignment
        should be allowed to be different in different space points.  If
        this parameter is set to zero (e.g. in hcana.param), then the
        ENGINE behavior is used.  For new analyses, it should be set to one.
        (Which is the default)
   {prefix}dc_fix_propcorr
        When a hit gets put into a stub, the distance of the hit from the
        discriminator can then be estimated.  In the engine, a correction to
        the drift time (and thus drift distance) is applied.  However, if
        that hit ends up in another stub, the correction will get applied again,
        resulting in a over correction.  Setting this flag to 1 will give that
        hit a different corection for each stub that it is in.

These flags will default to the new "correct" way of handling hits if
the above parameters are not set in a parameter file.  Currently, both
flags are set to zero in hcana.param to replicate the ENGINE behavior.

To implement these changes, the propagation correction and L/R information
for each hit is saved in space point and track classes.  This information
is still saved in the hit class, but only used if in ENGINE compatibility
mode.

The THcDCTrack class now saves a list of space point pointers instead
of space point indices.

The AddSpacePoint method now also copies all the hit information into
the track object so that THcDC doesn't need to explicitely copy all
the hits.

The FindStub method, which fits a stub track to a space point is passed
the space point rather than a list of hits

1.  nplusminus was not initialized corectly so small angle approximation
was never used.
2.  Change MAXTRACKS from 50 to 10 to match ENGINE.

  Name of coefficient file in hcana.param
  Some basic hms setting parameters added to test.database for run 50017
  Traceback code in THcHalCSpectrometer

is set hdbg_clusters_cal in hdebug.param

  Results are focal plane coordinate (transport) system, not detector system
  Turn on golden track selection.

Set 2d histogram limits on tracking results.

   Add track coordinates to track structure.
   Add code for single stubs
   Try to deal with plane number/index confusion

Since we have not yet overwritten the = operator for space points
had to add code to do this.

  Uses ROOT matrix math instead of solve_four_by_four
  Nothing is done with found tracks yet.  Will need to stuff these into
     podd style tracks.  (Or a class inherited from podd style tracks.)
  Residuals not saved anywhere
  Single stub mode not yet implemented
  No printing out of trackfit results (hdebugtrackprint)