{prefix}dc_fix_lr
        Historically, in the ENGINE, if a hit is used in multiple
        space points/stubs, the left/right assignment for that hit, which
        is later used in track fitting, is that assigned for the last stub
        encountered with that hit.  Properly, the left right assignment
        should be allowed to be different in different space points.  If
        this parameter is set to zero (e.g. in hcana.param), then the
        ENGINE behavior is used.  For new analyses, it should be set to one.
        (Which is the default)
   {prefix}dc_fix_propcorr
        When a hit gets put into a stub, the distance of the hit from the
        discriminator can then be estimated.  In the engine, a correction to
        the drift time (and thus drift distance) is applied.  However, if
        that hit ends up in another stub, the correction will get applied again,
        resulting in a over correction.  Setting this flag to 1 will give that
        hit a different corection for each stub that it is in.

These flags will default to the new "correct" way of handling hits if
the above parameters are not set in a parameter file.  Currently, both
flags are set to zero in hcana.param to replicate the ENGINE behavior.

To implement these changes, the propagation correction and L/R information
for each hit is saved in space point and track classes.  This information
is still saved in the hit class, but only used if in ENGINE compatibility
mode.

The THcDCTrack class now saves a list of space point pointers instead
of space point indices.

The AddSpacePoint method now also copies all the hit information into
the track object so that THcDC doesn't need to explicitely copy all
the hits.

The FindStub method, which fits a stub track to a space point is passed
the space point rather than a list of hits

  Results are focal plane coordinate (transport) system, not detector system
  Turn on golden track selection.

Set 2d histogram limits on tracking results.

   Add track coordinates to track structure.
   Add code for single stubs
   Try to deal with plane number/index confusion

  Uses ROOT matrix math instead of solve_four_by_four
  Nothing is done with found tracks yet.  Will need to stuff these into
     podd style tracks.  (Or a class inherited from podd style tracks.)
  Residuals not saved anywhere
  Single stub mode not yet implemented
  No printing out of trackfit results (hdebugtrackprint)

Set fDebugDC in THcDC::ReadDatabase

  Compiles and doesn't crash.

  New class THcDC is whole set of wire chambers.
  THcDriftChamber is one chamber (6 planes)
  Implement space point finding from h_pattern_recognition up to point
     before where space point lists from the two chambers are combined.
  Includes
      FindEasySpacePoint   (h_find_easy_space_point)
      FindHardSpacePoints  (find_space_points)
      DestroyPoorSpacePoints (h_sp_destroy)
      SpacePointMultiwire  (h_sp_multiwire)
      ChooseSingleHit 	   (h_choose_single_hit)
      SelectSpacePoint	   (select_space_points)

Space points are arrays of structures in the THcDriftChamber class.  Will
probably need to take space points out class so that they can be looked at
at the THcDC level.

New code is only tested to see that it compiles and that space points
are sometimes found.

of hardwiring them.

  It has not been check that we are getting a good start time yet.
  Drift time and distance added to tree
  Change DC plane names from 1, 2, 3, ... to 1x1, 1y1, ...
    This is so that the parameters holding the time to distance maps
       can be found.  (The parameters are e.g. hwc1x1fract)
    Need to find a way not to have to hard code these plane names.
       Either use wire angles (alpha) or some kind of parameter name mapping
  Changed output.def to match new plane names

      Start adding to the drift chamber code.   Setup a class structure
      similar to what podd uses for the VDCs.  Raw hit class renamed
      to THcRawDCHit.  Signal hits are how THcDCHit, modeled after
      podd hits.  Add THcDCWire, and classes for time to distance conversion.
      Time to distnace conversion doesn't do anything yet.

      Find some improved DC parameter files so that min and max TDC limits
      are good for the run we are using.

      THcDriftChamberPlane asks ThcDriftChamber for many parameters.

be made either in output.def or by analyzing root tree.

TClonesArray ConstructedAt method.

Raw hit class for drift chambers and skeleton drift chamber that prints
out drift chamber package hits.

Move Compare method from THcHodoscopeHit to ThcRawHit since it should
work for any derived class.

Get detector name -> ID mapping from the map file comments

THcHodoscope, a multiplane scintillator array.  Make a Hall
C style spectrometer (so that default Hall A detectors are not
included.)  Can read a Hall C data file and print out hodoscope hits
where the left/right TDC/ADC are matched up per counter.

get the hits.

for a detector.