sluc.param

; 1996 values(?)
;     sluc_pos_gain   =  .004219, .002490, .001626, .002978
;			.005263, .002075, .002805, .004673 
;     sluc_neg_gain   =	.000576, .002301, .003378, .002370
;			.004545, .002786, .002494, .003676

; These come from Tang.  They were done assuming that the peak
; corresponded to 12 p.e.  The factor of 0.5 converts this to 6 p.e.
; which is a better value for the correct beta of the particles.
; The two which are 0.5/200. are ones with basically no signal,
; due to incorrect timing of the ADC signal.
;      sluc_pos_gain = 0.5/138., 0.5/150., 0.5/200., 0.5/118.,
;                      0.5/130., 0.5/107., 0.5/200., 0.5/142.
;      sluc_neg_gain = 0.5/117., 0.5/133., 0.5/115., 0.5/154.,
;                      0.5/136., 0.5/156., 0.5/120., 0.5/122.

; New values. after HV modifications to the PMTs.
      sluc_pos_gain = 4.00E-3, 3.90E-3, 3.95E-3, 3.94E-3
                      4.09E-3, 4.24E-3, 4.10E-3, 4.03E-3
      sluc_neg_gain = 4.00E-3, 4.33E-3, 3.99E-3, 3.89E-3
                      4.02E-3, 4.25E-3, 4.20E-3, 4.01E-3


; the following are upper limits for acceptable pedestal data
; if zero then the pedestal will not be determined and not subtracted
    sluc_pos_ped_limit = 1500.,1500.,1500.,1500.,1500.,1500.,1500.,1500.

    sluc_neg_ped_limit = 1500.,1500.,1500.,1500.,1500.,1500.,1500.,1500.