Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • EIC/detectors/athena
  • zwzhao/athena
  • FernandoTA/athena
  • palspeic/athena
4 results
Show changes
Commits on Source (42)
Expand all Hide whitespace changes
Inline Side-by-side
Showing
with 713 additions and 454 deletions
.gitignore
View file @ 1008a184
......@@ -27,3 +27,5 @@ fieldmaps
manifest.txt
acts.txt
acts2.txt
materials-map.cbor
.gitlab-ci.yml
View file @ 1008a184
......@@ -115,20 +115,17 @@ dump_geometry:
- print_env.sh
## DEBUG
- mkdir -p geo
## disable fibers in SciFi endcap ECAL for better performance
## not needed, as we have no fibers in the current setup
#- sed -i '/<fiber/,+4d' ${DETECTOR_PATH}/compact/ci_ecal_scfi.xml
## finally: remove tracking subassemblies as they lower the display priority
## of some tracking detectors
- |
sed -i -e '/<detectors>/,/<\/detectors>/d' ${DETECTOR_PATH}/compact/tracking_config*.xml
mv ${DETECTOR_PATH}/compact/display_geoviewer.xml ${DETECTOR_PATH}/compact/display.xml
mv ${DETECTOR_PATH}/compact/colors_geoviewer.xml ${DETECTOR_PATH}/compact/colors.xml
for xml in ${DETECTOR_PATH}/compact/subsystem_views/*.xml; do
echo $xml
geo_name=`basename $xml .xml`_geo.root
cp $xml ${DETECTOR_PATH}/geo.xml
dd_web_display --output geo/${geo_name} ${DETECTOR_PATH}/geo.xml
done
## Lower-resolution display of the pfRICH sensors for global views
- sed -i 's/_default"\/>/_lores"\/>/' ${DETECTOR_PATH}/compact/pfrich.xml
## full geo with downstream beamline
- dd_web_display --output geo/detector_geo_full.root ${DETECTOR_PATH}/athena.xml
## only central detector geo
......@@ -143,11 +140,13 @@ dump_geometry:
## print some useful output
- |
echo "Geometry viewer at:"
echo "https://eic.phy.anl.gov/geoviewer/index.htm?file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/${CI_JOB_ID}/artifacts/raw/geo/detector_geo_full.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom75;ROTY290;ROTZ350;trz0;trr0;ctrl;all&"
echo "https://eic.phy.anl.gov/geoviewer/index.htm?file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/${CI_JOB_ID}/artifacts/raw/geo/detector_geo_full.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom75;ROTY290;ROTZ350;trz0;trr0;ctrl;all"
echo " - Central detector view at: "
echo "https://eic.phy.anl.gov/geoviewer/index.htm?file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/${CI_JOB_ID}/artifacts/raw/geo/detector_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom120;ROTY320;ROTZ340;trz0;trr0;ctrl;all"
for xml in ${DETECTOR_PATH}/compact/subsystem_views/*.xml; do
geo_name=`basename $xml .xml`_geo.root
echo " - Subsystem view for `basename $xml .xml` at:"
echo " https://eic.phy.anl.gov/geoviewer/index.htm?file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/${CI_JOB_ID}/artifacts/raw/geo/${geo_name}?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom75;ROTY290;ROTZ350;trz0;trr0;ctrl;all&"
echo " https://eic.phy.anl.gov/geoviewer/index.htm?file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/${CI_JOB_ID}/artifacts/raw/geo/${geo_name}?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom75;ROTY320;ROTZ340;trz0;trr0;ctrl;all"
done
detector_documentation:
......@@ -159,7 +158,7 @@ detector_documentation:
- bash bin/build_documentation | tee doc/detector.md
#- |
# xmllint --format --xpath '//comment/text()' ${DETECTOR_PATH}/athena.xml | sed -re 's/<\/?\w+>//g' | sed 's/^[[:space:]]*#/#/' | tee doc/detector.md
# xmllint --format --xpath '//comment/text()' ${DETECTOR_PATH}/ip6/ip6_defs.xml | sed -re 's/<\/?\w+>//g' | sed 's/^[[:space:]]*#/#/' | tee -a doc/detector.md || true
# xmllint --format --xpath '//comment/text()' ${DETECTOR_PATH}/ip6/definitions.xml | sed -re 's/<\/?\w+>//g' | sed 's/^[[:space:]]*#/#/' | tee -a doc/detector.md || true
# for afile in ${DETECTOR_PATH}/compact/*.xml ; do
# xmllint --format --xpath '//comment/text()' ${afile} | sed -re 's/<\/?\w+>//g' | sed 's/^[[:space:]]*#/#/' | tee -a doc/detector.md || true
# done
......@@ -180,7 +179,7 @@ report:
- view_20
- dump_constants
- dump_geometry
- convert_to_gdml
- dump_gdml
script:
- pip3 install jinja2 && ls -lrth
- ./bin/make_images > doc/dawn_views.md
......@@ -200,6 +199,7 @@ overlap_check_tgeo:
script:
## disable fibers in ECAL for normal overlap check
- sed -i '/<fiber/,+6d' ${DETECTOR_PATH}/compact/ecal_barrel_interlayers.xml
- sed -i '/<fiber/,+4d' ${DETECTOR_PATH}/ip6/far_forward/ZDC_Ecal_WSciFi.xml
- checkOverlaps -c ${DETECTOR_PATH}/athena.xml | tee doc/overlap_check_tgeo.out
- echo "$(cat doc/overlap_check_tgeo.out | grep ovlp | wc -l) overlaps..."
- if [[ "$(cat doc/overlap_check_tgeo.out | grep ovlp | wc -l)" -gt "0" ]] ; then echo "Overlaps exist!" && false ; fi
......@@ -211,6 +211,7 @@ overlap_check_geant4:full_fast:
script:
## disable fibers in ECAL for normal overlap check
- sed -i '/<fiber/,+6d' ${DETECTOR_PATH}/compact/ecal_barrel_interlayers.xml
- sed -i '/<fiber/,+4d' ${DETECTOR_PATH}/ip6/far_forward/ZDC_Ecal_WSciFi.xml
## reduce the number of fibers in Hadron EMCal for overlap check
## not needed, as we are running with a different setup now
#- sed -i 's/radius="EcalEndcapP_FiberRadius"/radius="EcalEndcapP_FiberRadius*10"/' ${DETECTOR_PATH}/compact/ci_ecal_scfi.xml
......@@ -230,13 +231,19 @@ overlap_check_geant4:inner_detector:
- echo "$(cat doc/overlap_check_geant4.out | grep GeomVol1002 | wc -l) overlaps..."
- if [[ "$(cat doc/overlap_check_geant4.out | grep GeomVol1002 | wc -l)" -gt "0" ]] ; then echo "Overlaps exist!" && false ; fi
convert_to_gdml:
dump_gdml:
stage: test
needs:
- ["common:detector"]
script:
- mkdir -p geo
- python scripts/convert_to_gdml.py --compact ${DETECTOR_PATH}/athena.xml --output geo/athena.gdml
- |
python scripts/convert_to_gdml.py --compact ${DETECTOR_PATH}/athena.xml --output geo/athena.gdml
for xml in ${DETECTOR_PATH}/compact/subsystem_views/*.xml; do
cp $xml ${DETECTOR_PATH}/geo.xml
gdml_name=`basename $xml .xml`.gdml
python scripts/convert_to_gdml.py --compact ${DETECTOR_PATH}/geo.xml --output geo/${gdml_name}
done
tracking_geometry_debug:
stage: test
......
CMakeLists.txt
View file @ 1008a184
......@@ -10,13 +10,18 @@ PROJECT(athena
)
set(CMAKE_CXX_STANDARD 17)
find_package( DD4hep REQUIRED COMPONENTS DDCore DDG4)
find_package(Acts REQUIRED COMPONENTS Core PluginIdentification PluginTGeo PluginDD4hep )
find_package(fmt)
#find_library(FMT_LIBRARY fmt)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Werror")
find_package(DD4hep REQUIRED COMPONENTS DDCore DDG4)
find_package(ActsDD4hep)
if(ActsDD4hep_FOUND)
add_compile_definitions(USE_ACTSDD4HEP)
set(ActsDD4hep ActsDD4hep::ActsDD4hep)
else()
find_package(Acts REQUIRED COMPONENTS Core PluginIdentification PluginTGeo PluginDD4hep)
set(ActsDD4hep ActsCore ActsPluginDD4hep)
endif()
find_package(fmt REQUIRED)
#-----------------------------------------------------------------------------------
set(a_lib_name athena)
......@@ -24,17 +29,15 @@ set(a_lib_name athena)
dd4hep_configure_output()
dd4hep_add_plugin(${a_lib_name} SOURCES
src/BackwardGEMTracker_geo.cpp
src/BarrelBarDetectorWithSideFrame_geo.cpp
src/BarrelCalorimeter_geo.cpp
src/BarrelCalorimeterHybrid_geo.cpp
src/BarrelCalorimeterInterlayers_geo.cpp
src/BarrelTrackerWithFrame_geo.cpp
src/CompositeTracker_geo.cpp
src/CylinderTrackerBarrel_geo.cpp
src/DIRC_geo.cpp
src/DRich_geo.cpp
src/ERich_geo.cpp
src/DRICH_geo.cpp
src/PFRICH_geo.cpp
src/FileLoader.cpp
src/FieldMapBrBz.cpp
src/GaseousRICH_geo.cpp
......@@ -48,10 +51,10 @@ dd4hep_add_plugin(${a_lib_name} SOURCES
src/SimpleDiskDetector_geo.cpp
src/SolenoidCoil_geo.cpp
src/TrapEndcapTracker_geo.cpp
USES ActsCore ActsPluginDD4hep
USES ${ActsDD4hep}
)
target_link_libraries(${a_lib_name}
PUBLIC DD4hep::DDCore DD4hep::DDRec fmt::fmt
PUBLIC DD4hep::DDCore DD4hep::DDRec fmt::fmt
)
#-----------------------------------------------------------------------------------
......
README.md
View file @ 1008a184
......@@ -3,22 +3,34 @@ Overview
The Athena Detector at IP6 for Electron-Ion Collider experiment.
**Detector geometry viewer:**
- [Central detector geometry](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/api/v4/projects/473/jobs/artifacts/master/raw/geo/detector_geo.root?job=report&item=default;1&opt=clipxyz;transp30;zoom100;ROTY0;ROTZ0;trz100;trr0;ctrl;all&)
- [Full Detector geometry (including beamline)](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/api/v4/projects/473/jobs/artifacts/master/raw/geo/detector_geo_full.root?job=report&item=default;1&opt=clipxyz;transp30;zoom75;ROTY290;ROTZ350;trz0;trr0;ctrl;all&)
<a href="https://eicweb.phy.anl.gov/api/v4/projects/473/jobs/artifacts/master/raw/images/view01.pdf?job=report">
<img src="https://eicweb.phy.anl.gov/api/v4/projects/473/jobs/artifacts/master/raw/images/view01.png?job=report" width="400px" />
- [Central detector](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/detector_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom120;ROTY320;ROTZ340;trz0;trr0;ctrl;all)
- [Full Detector (including beamline)](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/detector_geo_full.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom75;ROTY290;ROTZ350;trz0;trr0;ctrl;all)
- [Inner detector (without calorimetry)](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/inner_detector_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom75;ROTY320;ROTZ340;trz0;trr0;ctrl;all)
- Subsystem views:
- [Calorimetry](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/calorimeters_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom120;ROTY320;ROTZ340;trz0;trr0;ctrl;all)
- [PID](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/pid_only_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom75;ROTY320;ROTZ340;trz0;trr0;ctrl;all)
- [dRICH](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/drich_only_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom75;ROTY290;ROTZ350;trz0;trr0;ctrl;all)
- [pfRICH](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/pfrich_only_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom55;ROTY49;ROTZ350;trz0;trr0;ctrl;all&)
- [DIRC](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/dirc_only_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom120;ROTY320;ROTZ340;trz0;trr0;ctrl;all)
- [ToF](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/tof_only_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom55;ROTY49;ROTZ350;trz0;trr0;ctrl;all&)
- [Tracking](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/tracking_only_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom75;ROTY320;ROTZ340;trz0;trr0;ctrl;all)
- [Vertex detector](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/vertex_only_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom120;ROTY320;ROTZ340;trz0;trr0;ctrl;all)
- [Far-forward](https://eic.phy.anl.gov/geoviewer/index.htm?nobrowser&file=https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/geo/ip6_geo.root?job=dump_geometry&item=default;1&opt=clipx;clipy;transp30;zoom40;ROTY290;ROTZ350;trz0;trr0;ctrl;all)
<a href="https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/images/view01.pdf?job=report">
<img src="https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/images/view01.png?job=report" width="400px" />
</a>
<br />
<a href="https://eicweb.phy.anl.gov/api/v4/projects/473/jobs/artifacts/master/raw/images/view01_top.pdf?job=report">
<img src="https://eicweb.phy.anl.gov/api/v4/projects/473/jobs/artifacts/master/raw/images/view01_top.png?job=report" width="400px" />
<a href="https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/images/view01_top.pdf?job=report">
<img src="https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/images/view01_top.png?job=report" width="400px" />
</a>
[Browse latest](https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/browse/images?job=report)
[Detector views](views/detector_views.md)
[Detector views](https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/doc/dawn_views.md?job=report)
[Constants listing](https://eicweb.phy.anl.gov/EIC/detectors/athena/-/jobs/artifacts/master/raw/doc/constants.out?job=report)
Getting Started
---------------
......
athena.xml
View file @ 1008a184
......@@ -33,8 +33,8 @@
The ip6 (or other ip) defines should be included first.
These files have only a define tags.
</documentation>
<include ref="ip6/ip6_defs.xml" />
<include ref="ip6/far_forward_fields_275.xml" />
<include ref="ip6/definitions.xml" />
<include ref="ip6/far_forward/fields_275.xml" />
<include ref="compact/definitions.xml" />
</define>
......@@ -84,17 +84,6 @@
- and more...
</documentation>
<comment>
Beamline elements
-----------------
</comment>
<include ref="ip6/forward_ion_beamline.xml"/>
<include ref="ip6/beampipe_hadron_B0.xml" />
<include ref="ip6/beampipe.xml" />
<include ref="ip6/inner_vacuum_FF_magnets.xml"/>
<documentation level="5">
## Main magnet
......@@ -107,13 +96,15 @@
</documentation>
<!--include ref="compact/tracking_config_acadia.xml"/-->
<include ref="compact/tracking_config_canyonlands.xml"/>
<!--include ref="compact/tracking_config_canyonlands.xml"/-->
<include ref="compact/tracking_config_deathvalley.xml"/>
<documentation level="10">
### PID detectors
</documentation>
<!--include ref="compact/pid_config_acadia.xml" /-->
<include ref="compact/pid_config_canyonlands.xml" />
<!--include ref="compact/pid_config_canyonlands.xml" /-->
<include ref="compact/pid_config_deathvalley.xml" />
<documentation level="10">
## Central calorimetry
......@@ -124,70 +115,17 @@
<documentation level="11">
## Far foward detectors
</documentation>
<include ref="ip6/B0_tracker.xml"/>
<include ref="ip6/B0_preshower.xml"/>
<include ref="ip6/far_forward_offM_tracker.xml"/>
<include ref="ip6/far_forward_detectors.xml"/>
<include ref="ip6/roman_pots_eRD24_design.xml"/>
<fields>
<field name="B0PF_Magnet" type="MultipoleMagnet">
<position x="B0PF_XPosition" y="0" z="B0PF_CenterPosition"/>
<rotation x="0" y="B0PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0PF_InnerRadius" dz="B0PF_Length*0.5"/>
<coefficient coefficient="B0PF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="B0APF_Magnet" type="MultipoleMagnet">
<position x="B0APF_XPosition" y="0" z="B0APF_CenterPosition"/>
<rotation x="0" y="B0APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0APF_InnerRadius" dz="B0APF_Length*0.5"/>
<coefficient coefficient="B0APF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="Q1APF_Magnet" type="MultipoleMagnet">
<position x="Q1APF_XPosition" y="0" z="Q1APF_CenterPosition"/>
<rotation x="0" y="Q1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1APF_InnerRadius" dz="Q1APF_Length*0.5"/>
<coefficient coefficient="Q1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q1BPF_Magnet" type="MultipoleMagnet">
<position x="Q1BPF_XPosition" y="0" z="Q1BPF_CenterPosition"/>
<rotation x="0" y="Q1BPF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1BPF_InnerRadius" dz="Q1BPF_Length*0.5"/>
<coefficient coefficient="Q1BPF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1BPF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q2PF_Magnet" type="MultipoleMagnet">
<position x="Q2PF_XPosition" y="0" z="Q2PF_CenterPosition"/>
<rotation x="0" y="Q2PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q2PF_InnerRadius" dz="Q2PF_Length*0.5"/>
<coefficient coefficient="Q2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1PF_Magnet" type="MultipoleMagnet">
<position x="B1PF_XPosition" y="0" z="B1PF_CenterPosition"/>
<rotation x="0" y="B1PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1PF_InnerRadius" dz="B1PF_Length*0.5"/>
<coefficient coefficient="B1PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1APF_Magnet" type="MultipoleMagnet">
<position x="B1APF_XPosition" y="0" z="B1APF_CenterPosition"/>
<rotation x="0" y="B1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1APF_InnerRadius" dz="B1APF_Length*0.5"/>
<coefficient coefficient="B1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B2PF_Magnet" type="MultipoleMagnet">
<position x="B2PF_XPosition" y="0" z="B2PF_CenterPosition"/>
<rotation x="0" y="B2PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B2PF_InnerRadius" dz="B2PF_Length*0.5"/>
<coefficient coefficient="B2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
</fields>
<include ref="ip6/central_beampipe.xml"/>
<documentation level="11">
## Far foward detectors
</documentation>
<include ref="ip6/far_forward.xml"/>
<documentation level="11">
## Far backward detectors
</documentation>
<include ref="ip6/far_backward.xml"/>
<comment>
FB elements
......
bin/generate_prim_file
View file @ 1008a184
......@@ -52,7 +52,7 @@ parser.add_argument('-t', '--tag', type=str,dest='file_tag',
help='Output file tag')
parser.add_argument('--timeout', type=int,
default=60,
default=3600,
help='Timeout in seconds')
parser.add_argument('passthrough', nargs='*')
......
bin/make_images
View file @ 1008a184
......@@ -7,9 +7,15 @@ env = Environment(
autoescape=select_autoescape(['html', 'xml'])
)
import os
import glob
base_url = "https://eicweb.phy.anl.gov/api/v4/projects/390/jobs/artifacts/master/raw"
if "CI_PROJECT_ID" in os.environ:
CI_PROJECT_ID = str(os.environ["CI_PROJECT_ID"])
else:
CI_PROJECT_ID = "473"
base_url = f"https://eicweb.phy.anl.gov/api/v4/projects/{CI_PROJECT_ID}/jobs/artifacts/master/raw"
#images = ["images/view2a.png","images/view2b.png", "images/view1.png"]
images = glob.glob("images/*.png")
......
calibrations/calo_digi_canyonlands.json 0 → 100644
View file @ 1008a184
{
"ecal_neg_endcap": {
"readout": "module",
"dynamicRange": "20*GeV",
"capacityBitsADC": 14,
"pedestalMean": 100,
"pedestalSigma": 1,
"thresholdValue": 3
},
"hcal_neg_endcap": {
"readout": "tile",
"dynamicRange": "20*MeV",
"capacityBitsADC": 8,
"pedestalMean": 20,
"pedestalSigma": 0.3,
"thresholdValue": 1
},
"ecal_pos_endcap": {
"readout": "module",
"dynamicRange": "3*GeV",
"capacityBitsADC": 14,
"pedestalMean": 100,
"pedestalSigma": 0.7,
"thresholdValue": 2
},
"hcal_pos_endcap": {
"readout": "tile",
"dynamicRange": "3.6*GeV",
"capacityBitsADC": 10,
"pedestalMean": 20,
"pedestalSigma": 0.8,
"thresholdValue": 3
},
"ecal_barrel_imaging": {
"readout": "pixel",
"dynamicRange": "3*MeV",
"capacityBitsADC": 13,
"pedestalMean": 100,
"pedestalSigma": 14,
"thresholdValue": 50
},
"ecal_barrel_scfi": {
"readout": "light_guide",
"dynamicRange": "750*MeV",
"capacityBitsADC": 14,
"pedestalMean": 20,
"pedestalSigma": 0.3,
"thresholdValue": 1
},
"hcal_barrel": {
"readout": "tile",
"dynamicRange": "20*MeV",
"capacityBitsADC": 8,
"pedestalMean": 20,
"pedestalSigma": 0.3,
"thresholdValue": 1
}
}
calibrations/calo_digi_default.json 0 → 120000
View file @ 1008a184
calo_digi_canyonlands.json
\ No newline at end of file
calibrations/emcal_barrel_calibration.json
View file @ 1008a184
{
"electron": {
"particle_name": "electron",
"sampling_fraction": 0.10856976476514045,
"sampling_fraction_img": 0.00595078393326404,
"sampling_fraction_scfi": 0.10262666247845109,
"thrown_energy": 4.975791477972636
"sampling_fraction": 0.1053739677993623,
"sampling_fraction_error": 0.00014385360879111712,
"sampling_fraction_error_img": 7.262477989358573e-05,
"sampling_fraction_error_scfi": 0.0001238835428684493,
"sampling_fraction_img": 0.006008855583640059,
"sampling_fraction_scfi": 0.09940809338992981,
"thrown_energy": 5.000000028019361
}
}
calibrations/ffi_zdc.json 0 → 100644
View file @ 1008a184
{
"ffi_zdc_ecal": {
"sampling_fraction": 1.0,
"minClusterCenterEdep": "3.*MeV",
"minClusterHitEdep": "0.1*MeV",
"localDistXY": ["50*mm", "50*mm"],
"splitCluster": true
},
"ffi_zdc_hcal": {
"sampling_fraction": 1.0,
"minClusterCenterEdep": "1.*MeV",
"minClusterHitEdep": "0.1*MeV",
"localDistXY": ["200*mm", "200*mm"],
"splitCluster": false
}
}
compact/central_tracker_hybrid_v2.xml
View file @ 1008a184
This diff is collapsed.
compact/colors.xml
View file @ 1008a184
<display>
<comment>
A coherent color scheme. Pick from these colors and (in theory) it should look pretty good.
<comment>
Colors tweaked to be displayable by geoViewer
</comment>
<vis name="AnlGreen" alpha="1" r="119/255" g="179/255" b="0"/>
<vis name="AnlViolet" alpha="1" r="91/256" g="0" b="145/256"/>
<vis name="AnlProcess_Blue" alpha="1" r="0/256" g="130/256" b="202/256"/>
<vis name="AnlGreen" alpha="1" r="100/256" g="200/256" b="0/256"/>
<vis name="AnlViolet" alpha="1" r="100/256" g="0/256" b="150/256"/>
<vis name="AnlProcess_Blue" alpha="1" r="0/256" g="100/256" b="202/256"/>
<vis name="AnlOrange" alpha="1" r="255/256" g="121/256" b="0"/>
<vis name="AnlRed" alpha="1" r="205/256" g="32/256 " b="44/256"/>
<vis name="AnlGold" alpha="1" r="248/256" g="178/256" b="0/256"/>
<vis name="AnlRed" alpha="1" r="205/256" g="45/256 " b="45/256"/>
<vis name="AnlGold" alpha="1" r="248/256" g="188/256" b="0/256"/>
<vis name="AnlBlue" alpha="1" r="0/256" g="96/256" b="156/256"/>
<vis name="AnlTeal" alpha="1" r="0/256" g="161/256" b="156/256"/>
<vis name="AnlGray" alpha="1" r="102/256" g="102/256" b="102/256"/>
<vis name="AnlLight_Gray" alpha="1" r="209/256" g="209/256" b="209/256"/>
<vis name="AnlOff_White" alpha="1" r="242/256" g="242/256" b="242/256"/>
<vis name="AnlDelta_Red" alpha="1" r="161/256" g="43/256" b="47/256"/>
<vis name="AnlDelta_Green" alpha="1" r="0" g="120/256" b="54/256"/>
<vis name="AnlDelta_Blue" alpha="1" r="11/256" g="31/256" b="143/256"/>
<vis name="AnlLightGray" ref="AnlLight_Gray" />
<!-- off-white (or white) don't work! -->
<!--vis name="AnlOff_White" alpha="1" r="242/256" g="242/256" b="242/256"/-->
<vis name="AnlDarkRed" alpha="1" r="161/256" g="45/256" b="45/256"/>
<vis name="AnlDarkGreen" alpha="1" r="0" g="110/256" b="50/256"/>
<vis name="AnlDarkBlue" alpha="1" r="45/256" g="45/256" b="110/256"/>
<vis name="AnlDelta_Red" ref="AnlDarkRed"/>
<vis name="AnlDelta_Green" ref="AnlDarkGreen"/>
<vis name="AnlDelta_Blue" ref="AnlDarkBlue"/>
</display>
compact/colors2.xml deleted 100644 → 0
View file @ 0ea4d8e1
<display>
<comment>
This is where another color scheme can be developed.
Note this is currently just a copy of colors.xml
</comment>
<vis name="AnlGreen" alpha="1" r="119/255" g="179/255" b="0"/>
<vis name="AnlViolet" alpha="1" r="91/256" g="0" b="145/256"/>
<vis name="AnlProcess_Blue" alpha="1" r="0/256" g="130/256" b="202/256"/>
<vis name="AnlOrange" alpha="1" r="255/256" g="121/256" b="0"/>
<vis name="AnlRed" alpha="1" r="205/256" g="32/256 " b="44/256"/>
<vis name="AnlGold" alpha="1" r="248/256" g="178/256" b="0/256"/>
<vis name="AnlBlue" alpha="1" r="0/256" g="96/256" b="156/256"/>
<vis name="AnlTeal" alpha="1" r="0/256" g="161/256" b="156/256"/>
<vis name="AnlGray" alpha="1" r="102/256" g="102/256" b="102/256"/>
<vis name="AnlLight_Gray" alpha="1" r="209/256" g="209/256" b="209/256"/>
<vis name="AnlOff_White" alpha="1" r="242/256" g="242/256" b="242/256"/>
<vis name="AnlDelta_Red" alpha="1" r="161/256" g="43/256" b="47/256"/>
<vis name="AnlDelta_Green" alpha="1" r="0" g="120/256" b="54/256"/>
<vis name="AnlDelta_Blue" alpha="1" r="11/256" g="31/256" b="143/256"/>
</display>
compact/colors_geoviewer.xml deleted 100644 → 0
View file @ 0ea4d8e1
<display>
<comment>
Similar color to regular scheme but with values that can be displayed by geoviewer
</comment>
<vis name="AnlGreen" alpha="1" r="100/256" g="200/256" b="0/256"/>
<vis name="AnlViolet" alpha="1" r="100/256" g="0/256" b="150/256"/>
<vis name="AnlProcess_Blue" alpha="1" r="0/256" g="100/256" b="202/256"/>
<vis name="AnlOrange" alpha="1" r="255/256" g="121/256" b="0"/>
<vis name="AnlRed" alpha="1" r="205/256" g="45/256 " b="45/256"/>
<vis name="AnlGold" alpha="1" r="248/256" g="188/256" b="0/256"/>
<vis name="AnlBlue" alpha="1" r="0/256" g="96/256" b="156/256"/>
<vis name="AnlTeal" alpha="1" r="0/256" g="161/256" b="156/256"/>
<vis name="AnlGray" alpha="1" r="102/256" g="102/256" b="102/256"/>
<vis name="AnlLight_Gray" alpha="1" r="209/256" g="209/256" b="209/256"/>
<!-- off-white (or white) don't work! -->
<!--vis name="AnlOff_White" alpha="1" r="242/256" g="242/256" b="242/256"/-->
<vis name="AnlDelta_Red" alpha="1" r="161/256" g="45/256" b="45/256"/>
<vis name="AnlDelta_Green" alpha="1" r="0" g="110/256" b="50/256"/>
<vis name="AnlDelta_Blue" alpha="1" r="45/256" g="45/256" b="110/256"/>
</display>
compact/definitions.xml
View file @ 1008a184
......@@ -231,38 +231,78 @@ The unused IDs below are saved for future use.
<constant name="SolenoidYoke_ID" value="142"/>
<documentation>
#### (150-169) Far Forward Detectors
#### (150-169) Far Forward Detectors
- Forward Roman Pot ID: 150
- Forward B0 Tracker ID: 151
- Zero Degree Cal. Ecal ID: 160
- Zero Degree Cal. Hcal ID: 161
TODO: A lot of the repeated ID's below should be pushed into a single detector
TODO: A lot of the repeated ID's below should be pushed into a single detector
</documentation>
<constant name="B0Tracker_Station_1_ID" value="150"/>
<constant name="B0Tracker_Station_2_ID" value="151"/>
<constant name="B0Tracker_Station_3_ID" value="152"/>
<constant name="B0Tracker_Station_4_ID" value="153"/>
<constant name="B0Preshower_Station_1_ID" value="154"/>
<constant name="ForwardRomanPot_Station_1_ID" value="155"/>
<constant name="ForwardRomanPot_Station_1_ID" value="155"/>
<constant name="ForwardRomanPot_Station_2_ID" value="156"/>
<constant name="ForwardOffMTracker_station_1_ID" value="159"/>
<constant name="ForwardOffMTracker_station_1_ID" value="159"/>
<constant name="ForwardOffMTracker_station_2_ID" value="160"/>
<constant name="ForwardOffMTracker_station_3_ID" value="161"/>
<constant name="ForwardOffMTracker_station_4_ID" value="162"/>
<comment> TODO naming consistency </comment>
<constant name="ffi_ZDC_ECAL_ID" value="163"/>
<constant name="ffi_ZDC_HCAL_ID" value="164"/>
<constant name="ZDCEcal_ID" value="163"/>
<constant name="ZDCHcal_ID" value="164"/>
<constant name="VacuumMagnetElement_1_ID" value="165"/>
<documentation>
#### (170-189) Forward Beamline Magnets
#### (170-189) Far Forward Beamline Magnets
</documentation>
<constant name="B0PF_ID" value="170"/>
<constant name="B0APF_ID" value="171"/>
<constant name="Q1APF_ID" value="172"/>
<constant name="Q1BPF_ID" value="173"/>
<constant name="Q2PF_ID" value="174"/>
<constant name="B1PF_ID" value="175"/>
<constant name="B1APF_ID" value="176"/>
<constant name="B2PF_ID" value="177"/>
<constant name="Q0EF_ID" value="180"/>
<constant name="Q1EF_ID" value="181"/>
<documentation>
#### (190-199) Backward Beamline Magnets
#### (190-199) Far Backward Beamline Magnets
- Low-Q2 Tagger 1 Tracker ID: 195
- Low-Q2 Tagger 1 Calorimeter ID: 196
- Low-Q2 Tagger 2 Tracker ID: 198
- Low-Q2 Tagger 2 Calorimeter ID: 199
TODO: A lot of the repeated ID's below should be pushed into a single detector
</documentation>
<constant name="LumiCollimator_ID" value="190"/>
<constant name="LumiDipole_ID" value="191"/>
<constant name="TaggerTracker_1_ID" value="195"/>
<constant name="TaggerCalorimeter_1_ID" value="196"/>
<constant name="TaggerTracker_2_ID" value="198"/>
<constant name="TaggerCalorimeter_2_ID" value="199"/>
<documentation>
#### (200-219) Far Backward Beamline Magnets
</documentation>
<constant name="Pipe_to_Q1eR_ID" value="200"/>
<constant name="Magnet_Q1eR_ID" value="201"/>
<constant name="Pipe_in_Q1eR_ID" value="202"/>
<constant name="Pipe_Q1eR_to_Q2eR_ID" value="203"/>
<constant name="Magnet_Q2eR_ID" value="204"/>
<constant name="Pipe_in_Q2eR_ID" value="205"/>
<constant name="Pipe_Q2eR_to_B2AeR_ID" value="206"/>
<constant name="Magnet_B2AeR_ID" value="207"/>
<constant name="Pipe_in_B2AeR_ID" value="208"/>
<constant name="Pipe_B2AeR_to_B2BeR_ID" value="209"/>
<constant name="Magnet_B2BeR_ID" value="210"/>
<constant name="Pipe_in_B2BeR_ID" value="211"/>
<constant name="Magnet_Q3eR_ID" value="212"/>
<constant name="Vacuum_in_Q3eR_ID" value="213"/>
<documentation>
## Detector Definition Parameters
......@@ -311,6 +351,13 @@ Examples:
<constant name="Eta3_9_tan" value="tan(2*atan(exp(-3.9)))" />
<constant name="Eta4_0_tan" value="tan(2*atan(exp(-4.0)))" />
<constant name="Eta4_1_tan" value="tan(2*atan(exp(-4.1)))" />
<constant name="Eta4_2_tan" value="tan(2*atan(exp(-4.2)))" />
<constant name="Eta4_3_tan" value="tan(2*atan(exp(-4.3)))" />
<constant name="Eta4_4_tan" value="tan(2*atan(exp(-4.4)))" />
<constant name="Eta4_5_tan" value="tan(2*atan(exp(-4.5)))" />
<constant name="Eta4_6_tan" value="tan(2*atan(exp(-4.6)))" />
<constant name="Eta4_7_tan" value="tan(2*atan(exp(-4.7)))" />
<constant name="Eta4_8_tan" value="tan(2*atan(exp(-4.8)))" />
<comment>Solenoid option</comment>
......@@ -365,12 +412,13 @@ Examples:
</documentation>
<constant name="CentralTrackingRegion_rmax" value="950.0*mm" />
<constant name="CentralTrackingRegionP_zmax" value="1900.0*mm" />
<constant name="CentralTrackingRegionP_zmax" value="1700.0*mm" />
<constant name="CentralTrackingRegionN_zmax" value="1500.0*mm" />
<constant name="CentralTrackingRegion_length" value="CentralTrackingRegionP_zmax + CentralTrackingRegionN_zmax" />
<comment>
tan(theta) to determine rmin in the outer tracking region (due to tapered beampipe)
</comment>
<constant name="CentralTrackingBarrel_tan" value="Eta1_1_tan" />
<constant name="CentralTrackingRegionP_tan" value="Eta3_7_tan * 1.00" />
<constant name="CentralTrackingRegionN_tan" value="Eta4_0_tan * 0.99" />
......@@ -378,16 +426,35 @@ Examples:
### PID Detector Region Parameters
</documentation>
<comment> Global PID regions with suballocations for TOF and RICH detectors </comment>
<constant name="ForwardPIDRegion_zmin" value="CentralTrackingRegionP_zmax" />
<constant name="ForwardPIDRegion_length" value="140.0*cm" />
<constant name="ForwardPIDRegion_length" value="160.0*cm" />
<comment> Forward TOF region currenlty empty for future upgrades </comment>
<constant name="ForwardTOFRegion_zmin" value="ForwardPIDRegion_zmin" />
<constant name="ForwardTOFRegion_length" value="20.0*cm" />
<constant name="ForwardTOFRegion_rmax" value="CentralTrackingRegion_rmax" />
<constant name="ForwardTOFRegion_tan" value="CentralTrackingRegionP_tan" />
<comment> Forward RICH region </comment>
<constant name="ForwardRICHRegion_zmin" value="ForwardTOFRegion_zmin + ForwardTOFRegion_length" />
<constant name="ForwardRICHRegion_length" value="ForwardPIDRegion_length - ForwardTOFRegion_length" />
<comment> tangent of the opening angle at the front and back of the RICH </comment>
<constant name="ForwardPIDRegion_tan1" value="CentralTrackingRegionP_tan * 1.00" />
<constant name="ForwardPIDRegion_tan2" value="Eta3_6_tan * 1.01" />
<constant name="ForwardRICHRegion_tan1" value="CentralTrackingRegionP_tan * 0.88" />
<constant name="ForwardRICHRegion_tan2" value="Eta3_6_tan * 0.89" />
<constant name="BackwardPIDRegion_zmin" value="CentralTrackingRegionN_zmax" />
<constant name="BackwardPIDRegion_tan" value="CentralTrackingRegionN_tan" />
<constant name="BackwardPIDRegion_length" value="60.0*cm" />
<constant name="BackwardPIDRegion_rmax" value="CentralTrackingRegion_rmax" />
<constant name="BackwardPIDRegion_tan" value="CentralTrackingRegionN_tan * 0.92" />
<comment> Backward RICH region </comment>
<constant name="BackwardRICHRegion_zmin" value="BackwardPIDRegion_zmin" />
<constant name="BackwardRICHRegion_length" value="58.0*cm" />
<comment> Backward TOF region, currently empty for upgrades </comment>
<constant name="BackwardTOFRegion_zmin" value="BackwardRICHRegion_zmin + BackwardRICHRegion_length" />
<constant name="BackwardTOFRegion_length" value="BackwardPIDRegion_length - BackwardRICHRegion_length" />
<comment> Note: PID has space for DIRC, ExtraSpace sits past the PID</comment>
<constant name="BarrelPIDRegion_thickness" value="8.0 * cm" />
......@@ -399,7 +466,7 @@ Examples:
<constant name="BackwardTrackingRegion_tan" value="CentralTrackingRegionN_tan" />
<constant name="BackwardTrackingRegion_zmin" value="BackwardPIDRegion_zmin + BackwardPIDRegion_length" />
<constant name="ForwardTrackingRegion_tan" value="ForwardPIDRegion_tan2" />
<constant name="ForwardTrackingRegion_tan" value="ForwardRICHRegion_tan2" />
<constant name="ForwardTrackingRegion_zmin" value="ForwardPIDRegion_zmin + ForwardPIDRegion_length" />
<constant name="ForwardTrackingRegion_length" value="10.0*cm" />
<constant name="BackwardTrackingRegion_length" value="0.0*cm" />
......@@ -429,7 +496,12 @@ Service gaps in FW direction (before endcapP ECAL) and BW direction (before endc
<constant name="EcalEndcapN_zmin" value="BackwardPIDRegion_zmin + BackwardInnerEndcapRegion_length"/>
<constant name="EcalEndcapN_length" value="60*cm" />
<constant name="EcalEndcapN_rmin" value="max((EcalEndcapN_zmin + EcalEndcapN_length) * tan(abs(CrossingAngle)) + 15.5 * mm, 5*cm)" />
<comment>
rmin1: rmin round electron pipe (ignoring the hadron pipe)
rmin2: rmin around both beam pipes
</comment>
<constant name="EcalEndcapN_rmin1" value="Eta4_6_tan * EcalEndcapN_zmin" />
<constant name="EcalEndcapN_rmin2" value="Eta4_1_tan * EcalEndcapN_zmin" />
<constant name="EcalEndcapN_rmax" value="CentralTrackingRegion_rmax" />
<constant name="EcalBarrelRegion_thickness" value="45.0*cm"/>
......
compact/display.xml
View file @ 1008a184
......@@ -25,7 +25,31 @@
<vis name="VertexLayerVis" ref="AnlGray" visible="true" showDaughters="true" />
<vis name="VertexModuleVis" ref="TrackerLayerVis" visible="true" showDaughters="false" />
<vis name="TOFVis" ref="AnlGreen" showDaughters="true" />
<vis name="TOFVis" ref="AnlTeal" visible="true" showDaughters="true"/>
<vis name="TOFLayerVis" ref="TOFVis" visible="true" showdaughters="true"/>
<vis name="TOFModuleVis" ref="TOFVis" visible="true" showdaughters="true"/>
<vis name="TOFSupportVis" ref="TrackerSupportVis" visible="true" showDaughters="true"/>
<vis name="TOFSensorVis" ref="TOFVis" visible="true" showDaughters="true"/>
<comment> By default don't display the barrel module details </comment>
<vis name="TOFBarrelModuleVis" ref="TOFVis" visible="true" showdaughters="true"/>
<comment> extra detailed vizualizations for the barrel </comment>
<vis name="TOFHybridVis" ref="AnlGold" visible="true" showDaughters="true"/>
<vis name="TOFCoolingTube" ref="AnlRed" visible="true" showDaughters="true"/>
<vis name="TOFCoolant" ref="TrackerServiceVis" visible="true" showDaughters="true"/>
<vis name="TOFCSkinVis" ref="TrackerSupportVis" visible="true" showDaughters="true"/>
<vis name="TOFCFoamVis" ref="TrackerSupportVis" visible="true" showDaughters="true"/>
<vis name="TOFCHoneycombVis" ref="TrackerServiceVis" visible="true" showDaughters="true"/>
<vis name="FFTrackerVis" ref="AnlRed" />
<vis name="FFTrackerSupportVis" ref="AnlBlue" visible="true" showDaughters="false" />
<vis name="FFTrackerShieldingVis" ref="AnlGray" visible="true" showDaughters="false" />
<vis name="FFTrackerServiceVis" ref="AnlGold" visible="true" showDaughters="false" />
<vis name="FFTrackerLayerVis" ref="TrackerVis" visible="true" showDaughters="true" />
<vis name="FFTrackerModuleVis" ref="FFTrackerLayerVis" visible="true" showDaughters="true" />
<vis name="FFTrackerSurfaceVis" ref="FFTrackerLayerVis" visible="true" showDaughters="true" />
<comment> For shielded modules by default just display to module instead of 6 layers </comment>
<vis name="FFTrackerShieldedModuleVis" ref="FFTrackerModuleVis" visible="true" showDaughters="false" />
<comment>
ECal Vis
......@@ -45,6 +69,12 @@
<vis name="EcalEndcapNModuleVis" ref="AnlGold" showDaughters="false" visible="true"/>
<vis name="FFPreVis" ref="AnlGold" showDaughters="true" visible="true"/>
<vis name="FFPreLayerVis" ref="FFPreVis" showDaughters="true" visible="true"/>
<vis name="FFPreModuleVis" ref="FFPreLayerVis" showDaughters="true" visible="true"/>
<vis name="FFPreRadiatorVis" ref="FFPreModuleVis" showDaughters="true" visible="true"/>
<vis name="FFPreReadoutVis" ref="FFTrackerSurfaceVis" showDaughters="true" visible="true"/>
<comment>
HCal Vis
</comment>
......@@ -65,7 +95,7 @@
<comment>
Solenoid
</comment>
<vis name="SolenoidCoilVis" ref="AnlLight_Gray" showDaughters="true" visible="true" lineStyle="solid" drawingStyle="solid" />
<vis name="SolenoidCoilVis" ref="AnlLightGray" showDaughters="true" visible="true" lineStyle="solid" drawingStyle="solid" />
<vis name="SolenoidCryostatVis" ref="AnlGray" showDaughters="true" visible="true" lineStyle="solid" drawingStyle="solid" />
<vis name="SolenoidYokeVis" ref="AnlLight_Gray" showDaughters="false" visible="true" lineStyle="solid" drawingStyle="solid" />
......@@ -83,23 +113,23 @@
<vis name="DIRCBarVis" ref="AnlTeal" showDaughters="true" visible="true"/>
<comment>
Beam line
Beam line with magnets
</comment>
<vis name="BeamPipeVis" ref="AnlLightGray" showDaughters="true" visible="true"/>
<vis name="FFMagnetVis" ref="AnlGreen" showDaughters="true" visible="true"/>
<vis name="FFMagnetCoilVis" ref="AnlRed" showDaughters="true" visible="true"/>
<comment>
ZDC visualization
</comment>
<vis name="ffi_ZDC_ECAL_Vis" ref="AnlGreen" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_ECAL_module_Vis" ref="AnlRed" showDaughters="false" visible="true"/>
<vis name="ffi_ZDC_HCAL_Vis" ref="AnlBlue" showDaughters="true" visible="true"/>
<comment>
PID visualization
</comment>
<vis name="BeamPipeVis" ref="AnlLight_Gray" showDaughters="true" visible="true"/>
<vis name="cb_SolenoidVis" alpha="0.4" r= "0.1" g="0.0" b="0.1" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_ECAL_Vis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_ECAL_module_Vis" alpha="1.0" r= "0.1" g="1.0" b="0.9" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_HCAL_Vis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="cb_CTDVis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="cb_CTD_Si_layerVis" alpha="1.0" r= "0.9" g="1.0" b="0.1" showDaughters="true" visible="true"/>
<vis name="ce_GEMVis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="cb_GEM_layerVis" alpha="0.8" r= "0.8" g="0.4" b="0.3" showDaughters="true" visible="true"/>
<vis name="cb_VTX_BarrelVis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="cb_VTX_Barrel_layerVis" alpha="2.0" r= "0.0" g="0.2" b="0.8" showDaughters="true" visible="true"/>
<vis name="ci_GEMVis" r= "0.8" g="0.4" b="0.3" alpha="0.8" showDaughters="true" visible="true"/>
<vis name="ci_HCALVis" r= "0.6" g="0" b="0.6" alpha="1.0" showDaughters="true" visible="true"/>
<vis name="DRICH_vessel_vis" ref="AnlGray" showDaughters="true" visible="true" />
<vis name="DRICH_gas_vis" ref="AnlGreen" alpha="0.5" showDaughters="true" visible="true" />
......@@ -107,6 +137,7 @@
<vis name="DRICH_filter_vis" alpha="1.0" r="1.0" g="1.0" b="0.0" showDaughters="true" visible="true" />
<vis name="DRICH_mirror_vis" ref="AnlGray" showDaughters="true" visible="true" />
<vis name="DRICH_sensor_vis" ref="AnlBlue" showDaughters="true" visible="true" />
<vis name="PFRICH_sensor_vis" ref="AnlBlue" showDaughters="true" visible="true" />
<vis name="MRICH_aerogel_vis" ref="AnlTeal" showDaughters="true" visible="true" />
<vis name="MRICH_frame_vis" ref="AnlGold" showDaughters="true" visible="true" />
......
compact/display_detailed.xml
View file @ 1008a184
......@@ -11,42 +11,83 @@
<comment>
Tracking Visualizations
</comment>
<vis name="TrackerSupportVis" ref="AnlBlue" showDaughters="false" />
<vis name="TrackerLayerVis" ref="AnlTeal" visible="true" showDaughters="true" />
<vis name="TrackerModuleVis" ref="TrackerLayerVis" visible="true" showDaughters="false" />
<vis name="VertexSupportVis" ref="AnlBlue" showDaughters="false" />
<vis name="VertexLayerVis" ref="AnlTeal" visible="true" showDaughters="true" />
<vis name="VertexModuleVis" ref="TrackerLayerVis" visible="true" showDaughters="false" />
<vis name="TOFVis" ref="AnlGreen" showDaughters="true" />
<vis name="TrackerVis" ref="AnlRed" />
<vis name="TrackerSupportVis" ref="AnlBlue" visible="true" showDaughters="false" />
<vis name="TrackerServiceVis" ref="AnlGold" showDaughters="false" />
<vis name="TrackerLayerVis" ref="AnlGray" visible="true" showDaughters="true" />
<vis name="TrackerModuleVis" ref="TrackerLayerVis" visible="true" showDaughters="true" />
<vis name="TrackerMPGDVis" ref="AnlRed" visible="true" showDaughters="true" />
<comment> Layer-based visualization for MPGD detectors as it looks better </comment>
<vis name="TrackerGEMModuleVis" ref="TrackerMPGDVis" visible="true" showDaughters="false" />
<vis name="TrackerMMGASLayerVis" ref="TrackerMPGDVis" visible="true" showDaughters="false" />
<vis name="VertexLayerVis" ref="AnlGray" visible="true" showDaughters="false" />
<vis name="VertexSupportLayerVis" ref="AnlBlue" visible="true" showDaughters="false" />
<vis name="VertexSupportVis" ref="VertexSupportLayerVis" visible="true" showDaughters="true" />
<vis name="VertexModuleVis" ref="TrackerLayerVis" visible="true" showDaughters="true" />
<vis name="TOFVis" ref="AnlTeal" visible="true" showDaughters="true"/>
<vis name="TOFLayerVis" ref="TOFVis" visible="true" showdaughters="true"/>
<vis name="TOFModuleVis" ref="TOFVis" visible="true" showdaughters="true"/>
<vis name="TOFSupportVis" ref="TrackerSupportVis" visible="true" showDaughters="true"/>
<vis name="TOFSensorVis" ref="TOFVis" visible="true" showDaughters="true"/>
<vis name="TOFBarrelModuleVis" ref="TOFVis" visible="true" showdaughters="true"/>
<vis name="TOFHybridVis" ref="AnlGold" visible="true" showDaughters="true"/>
<vis name="TOFCoolingTube" ref="AnlRed" visible="true" showDaughters="true"/>
<vis name="TOFCoolant" ref="TrackerServiceVis" visible="true" showDaughters="true"/>
<vis name="TOFCSkinVis" ref="TrackerSupportVis" visible="true" showDaughters="true"/>
<vis name="TOFCFoamVis" ref="TrackerSupportVis" visible="true" showDaughters="true"/>
<vis name="TOFCHoneycombVis" ref="TrackerServiceVis" visible="true" showDaughters="true"/>
<vis name="FFTrackerVis" ref="AnlRed" />
<vis name="FFTrackerSupportVis" ref="AnlBlue" visible="true" showDaughters="false" />
<vis name="FFTrackerShieldingVis" ref="AnlGray" visible="true" showDaughters="false" />
<vis name="FFTrackerServiceVis" ref="AnlGold" visible="true" showDaughters="false" />
<vis name="FFTrackerLayerVis" ref="TrackerVis" visible="true" showDaughters="true" />
<vis name="FFTrackerModuleVis" ref="FFTrackerLayerVis" visible="true" showDaughters="true" />
<vis name="FFTrackerSurfaceVis" ref="FFTrackerLayerVis" visible="true" showDaughters="true" />
<comment> Display shielded modules in all their glory </comment>
<vis name="FFTrackerShieldedModuleVis" ref="FFTrackerModuleVis" visible="true" showDaughters="true" />
<comment>
ECal Vis
</comment>
<vis name="EcalVis" ref="AnlGold" showDaughters="true" visible="true"/>
<vis name="EcalEndcapVis" ref="AnlGold" showDaughters="false" visible="true"/>
<vis name="EcalBarrelVis" ref="AnlGold" showDaughters="false" visible="true"/>
<vis name="EcalBarrelStaveVis" ref="AnlViolet" showDaughters="false" visible="true" />
<vis name="EcalBarrelEnvelopeVis" ref="AnlViolet" showDaughters="false" visible="true" />
<vis name="EcalBarrelSupportVis" ref="AnlOrange" showDaughters="false" visible="true"/>
<vis name="EcalBarrelLayerVis" ref="AnlBlue" showDaughters="true" visible="true"/>
<vis name="EcalBarrelSliceVis" ref="AnlBlue" showDaughters="false" visible="true"/>
<vis name="EcalBarrelLayerVis" ref="AnlGold" showDaughters="false" visible="true"/>
<vis name="EcalBarrelEnvelopeVis" ref="AnlGold" showDaughters="true" visible="false" />
<vis name="EcalBarrelStaveVis" ref="AnlGold" showDaughters="true" visible="true" />
<vis name="EcalBarrelFiberLayerVis" ref="AnlGold" showDaughters="false" visible="true" />
<vis name="EcalBarrelSliceVis" ref="AnlGray"/>
<vis name="EcalBarrelSupportVis" ref="AnlOrange"/>
<vis name="EcalVis" ref="AnlGold" showDaughters="true" visible="false"/>
<vis name="EcalEndcapVis" ref="AnlGold" showDaughters="false" visible="true"/>
<vis name="EcalEndcapLayerVis" ref="AnlGold" showDaughters="false" visible="true"/>
<vis name="EcalEndcapBlockVis" ref="AnlGold" showDaughters="false" visible="true"/>
<vis name="EcalEndcapNModuleVis" ref="AnlTeal" showDaughters="false" visible="true"/>
<vis name="EcalEndcapNModuleVis" ref="AnlGold" showDaughters="false" visible="true"/>
<vis name="FFPreVis" ref="AnlGold" showDaughters="true" visible="true"/>
<vis name="FFPreLayerVis" ref="FFPreVis" showDaughters="true" visible="true"/>
<vis name="FFPreModuleVis" ref="FFPreLayerVis" showDaughters="true" visible="true"/>
<vis name="FFPreRadiatorVis" ref="FFPreModuleVis" showDaughters="true" visible="true"/>
<vis name="FFPreReadoutVis" ref="FFTrackerSurfaceVis" showDaughters="true" visible="true"/>
<comment>
HCal Vis
</comment>
<vis name="HcalVis" ref="AnlViolet" showDaughters="true" visible="true"/>
<vis name="HcalBarrelVis" ref="AnlViolet" showDaughters="true" visible="true"/>
<vis name="HcalBarrelStaveVis" ref="AnlViolet" showDaughters="true" visible="true"/>
<vis name="HcalBarrelLayerVis" ref="AnlViolet" showDaughters="false" visible="true"/>
<vis name="HcalEndcapVis" ref="AnlViolet" showDaughters="true" visible="true"/>
<vis name="HcalEndcapLayerVis" ref="AnlViolet" showDaughters="false" visible="true"/>
<vis name="HcalSensorVis" ref="AnlBlue" showDaughters="false" visible="false"/>
<vis name="HcalAbsorberVis" ref="AnlViolet" showDaughters="false" visible="false"/>
<vis name="HcalVis" ref="AnlBlue" showDaughters="true" visible="true"/>
<vis name="HcalBarrelVis" ref="AnlBlue" showDaughters="true" visible="true"/>
<vis name="HcalBarrelStaveVis" ref="AnlBlue" showDaughters="false" visible="true"/>
<vis name="HcalBarrelLayerVis" ref="AnlBlue" showDaughters="true" visible="true"/>
<vis name="HcalEndcapVis" ref="AnlBlue" showDaughters="false" visible="true"/>
<vis name="HcalEndcapLayerVis" ref="AnlBlue" showDaughters="true" visible="true"/>
<vis name="HcalSensorVis" ref="AnlBlue" showDaughters="true" visible="true"/>
<vis name="HcalAbsorberVis" ref="AnlGray" showDaughters="true" visible="true"/>
<comment>
Passive steel for flux return
</comment>
<vis name="PassiveSteelVis" ref="AnlViolet" showDaughters="false" visible="true"/>
<comment>
Solenoid
......@@ -59,43 +100,65 @@
<comment>
PID Detectors
</comment>
<vis name="RICHVis" ref="AnlViolet" showDaughters="true"/>
<vis name="RICHVis" ref="AnlTeal" showDaughters="true"/>
<vis name="DIRCVis" ref="AnlTeal" showDaughters="true" visible="true"/>
<vis name="DIRCLayerVis" ref="AnlTeal" showDaughters="false" visible="true"/>
<vis name="DIRCModuleVis" ref="AnlTeal" showDaughters="true" visible="true"/>
<vis name="DIRCSupportVis" ref="AnlTeal" showDaughters="true" visible="true"/>
<vis name="DIRCFrameVis" ref="AnlOrange" showDaughters="true" visible="true"/>
<vis name="DIRCBarVis" ref="AnlTeal" showDaughters="true" visible="true"/>
<comment>
Beam line with magnets
</comment>
<vis name="BeamPipeVis" ref="AnlLightGray" showDaughters="true" visible="true"/>
<vis name="FFMagnetVis" ref="AnlGreen" showDaughters="true" visible="true"/>
<vis name="FFMagnetCoilVis" ref="AnlRed" showDaughters="true" visible="true"/>
<comment>
ZDC visualization
</comment>
<vis name="ffi_ZDC_ECAL_Vis" ref="AnlGreen" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_ECAL_module_Vis" ref="AnlRed" showDaughters="false" visible="true"/>
<vis name="ffi_ZDC_HCAL_Vis" ref="AnlBlue" showDaughters="true" visible="true"/>
<comment>
Beam line
PID visualization
</comment>
<vis name="BeamPipeVis" ref="AnlLight_Gray" showDaughters="true" visible="true"/>
<vis name="cb_SolenoidVis" alpha="0.4" r= "0.1" g="0.0" b="0.1" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_ECAL_Vis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_ECAL_module_Vis" alpha="1.0" r= "0.1" g="1.0" b="0.9" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_HCAL_Vis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="cb_CTDVis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="cb_CTD_Si_layerVis" alpha="1.0" r= "0.9" g="1.0" b="0.1" showDaughters="true" visible="true"/>
<vis name="ce_GEMVis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="cb_GEM_layerVis" alpha="0.8" r= "0.8" g="0.4" b="0.3" showDaughters="true" visible="true"/>
<vis name="cb_VTX_BarrelVis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="cb_VTX_Barrel_layerVis" alpha="2.0" r= "0.0" g="0.2" b="0.8" showDaughters="true" visible="true"/>
<vis name="ci_GEMVis" r= "0.8" g="0.4" b="0.3" alpha="0.8" showDaughters="true" visible="true"/>
<vis name="ci_HCALVis" r= "0.6" g="0" b="0.6" alpha="1.0" showDaughters="true" visible="true"/>
<vis name="DRICH_vessel_vis" ref="AnlGray" showDaughters="true" visible="true" />
<vis name="DRICH_gas_vis" ref="AnlLightGray" alpha="0.2" showDaughters="true" visible="true" />
<vis name="DRICH_aerogel_vis" ref="AnlTeal" showDaughters="true" visible="true" />
<vis name="DRICH_filter_vis" alpha="1.0" r="1.0" g="1.0" b="0.0" showDaughters="true" visible="true" />
<vis name="DRICH_mirror_vis" ref="AnlGray" showDaughters="true" visible="true" />
<vis name="DRICH_sensor_vis" ref="AnlGreen" showDaughters="true" visible="true" />
<vis name="PFRICH_sensor_vis" ref="AnlGreen" showDaughters="true" visible="true" />
<vis name="MRICH_aerogel_vis" ref="AnlTeal" showDaughters="true" visible="true" />
<vis name="MRICH_frame_vis" ref="AnlGold" showDaughters="true" visible="true" />
<vis name="MRICH_lens_vis" ref="AnlGray" showDaughters="true" visible="true" />
<vis name="MRICH_mirror_vis" ref="AnlGray" showDaughters="true" visible="true" />
<vis name="RICHServiceVis" ref="AnlGray" showDaughters="true" visible="true" />
<comment>
Deprecated colors.
vis name="GreenVis" alpha="1.0" r= "0.0" g="1.0" b="0.0" showDaughters="true" visible="true"/
vis name="RedVis" alpha="0.2" r= "1.0" g="0.0" b="0.0" showDaughters="true" visible="true"/
vis name="RPVis" alpha="0.99" r= "1.0" g="0.0" b="0.0" showDaughters="true" visible="true"/
vis name="RPLayerVis" alpha="0.99" r= "0.0" g="0.7" b="0.3" showDaughters="true" visible="true" lineStyle="solid" drawingStyle="solid" /
vis name="BlueVis" alpha="1.0" r= "0.0" g="0.0" b="1.0" showDaughters="true" visible="true"/
vis name="OrangeVis" alpha="1.0" r= "1.0" g="0.45" b="0.0" showDaughters="true" visible="true"/
vis name="RedGreenVis" alpha="0.5" r= "1.0" g="1.0" b="0.0" showDaughters="true" visible="true"/
vis name="BlueGreenVis" alpha="0.5" r= "0.0" g="1.0" b="1.0" showDaughters="true" visible="true"/
vis name="PurpleVis" alpha="1.0" r= "1.0" g="0.0" b="1.0" showDaughters="true" visible="true"/
vis name="DoubleRedG" alpha="0.5" r= "2.0" g=".10" b="0.0" showDaughters="true" visible="true"/
vis name="RBG015" alpha="0.5" r= "0.0" g=".2" b="1.0" showDaughters="true" visible="true"/
vis name="RBG510" alpha="0.5" r= "1.0" g=".2" b="0.0" showDaughters="true" visible="true"/
vis name="RBG" alpha="0.5" r= "1.0" g="1.0" b="1.0" showDaughters="true" visible="true"/
vis name="GrayVis" alpha="1.0" r= "0.75" g="0.75" b="0.75" showDaughters="true" visible="true"/
Deprecated values used for IP6 vis
</comment>
<vis name="GreenVis" ref="AnlGreen" showDaughters="true" visible="true"/>
<vis name="RedVis" ref="AnlRed" showDaughters="true" visible="true"/>
<vis name="RPVis" ref="AnlDelta_Red" showDaughters="true" visible="true"/>
<vis name="RPLayerVis" ref="AnlTeal" showDaughters="true" visible="true" lineStyle="solid" drawingStyle="solid" />
<vis name="BlueVis" ref="AnlBlue" showDaughters="true" visible="true"/>
<vis name="OrangeVis" ref="AnlOrange" showDaughters="true" visible="true"/>
<vis name="BlueGreenVis" alpha="0.5" r= "0.0" g="1.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="PurpleVis" alpha="1.0" r= "1.0" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="DoubleRedG" alpha="0.5" r= "2.0" g=".10" b="0.0" showDaughters="true" visible="true"/>
<vis name="RBG015" alpha="0.5" r= "0.0" g=".2" b="1.0" showDaughters="true" visible="true"/>
<vis name="RBG510" alpha="0.5" r= "1.0" g=".2" b="0.0" showDaughters="true" visible="true"/>
<vis name="RBG" alpha="0.5" r= "1.0" g="1.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="GrayVis" alpha="1.0" r= "0.75" g="0.75" b="0.75" showDaughters="true" visible="true"/>
<vis name="AnlRed_1" alpha="0.5" r="205/256" g="32/256" b="44/256"/>
</display>
compact/display_geoviewer.xml
View file @ 1008a184
......@@ -25,7 +25,28 @@
<vis name="VertexSupportVis" ref="VertexSupportLayerVis" visible="true" showDaughters="true" />
<vis name="VertexModuleVis" ref="TrackerLayerVis" visible="true" showDaughters="true" />
<vis name="TOFVis" ref="AnlTeal" showDaughters="true" visible="true"/>
<vis name="TOFVis" ref="AnlTeal" visible="true" showDaughters="true"/>
<vis name="TOFLayerVis" ref="TOFVis" visible="true" showdaughters="true"/>
<vis name="TOFModuleVis" ref="TOFVis" visible="true" showdaughters="true"/>
<vis name="TOFSupportVis" ref="TrackerSupportVis" visible="true" showDaughters="true"/>
<vis name="TOFSensorVis" ref="TOFVis" visible="true" showDaughters="true"/>
<vis name="TOFBarrelModuleVis" ref="TOFVis" visible="true" showdaughters="true"/>
<vis name="TOFHybridVis" ref="AnlGold" visible="true" showDaughters="true"/>
<vis name="TOFCoolingTube" ref="AnlRed" visible="true" showDaughters="true"/>
<vis name="TOFCoolant" ref="TrackerServiceVis" visible="true" showDaughters="true"/>
<vis name="TOFCSkinVis" ref="TrackerSupportVis" visible="true" showDaughters="true"/>
<vis name="TOFCFoamVis" ref="TrackerSupportVis" visible="true" showDaughters="true"/>
<vis name="TOFCHoneycombVis" ref="TrackerServiceVis" visible="true" showDaughters="true"/>
<vis name="FFTrackerVis" ref="AnlRed" />
<vis name="FFTrackerSupportVis" ref="AnlBlue" visible="true" showDaughters="false" />
<vis name="FFTrackerShieldingVis" ref="AnlGray" visible="true" showDaughters="false" />
<vis name="FFTrackerServiceVis" ref="AnlGold" visible="true" showDaughters="false" />
<vis name="FFTrackerLayerVis" ref="TrackerVis" visible="true" showDaughters="true" />
<vis name="FFTrackerModuleVis" ref="FFTrackerLayerVis" visible="true" showDaughters="true" />
<vis name="FFTrackerSurfaceVis" ref="FFTrackerLayerVis" visible="true" showDaughters="true" />
<comment> For shielded modules by default just display to module instead of 6 layers </comment>
<vis name="FFTrackerShieldedModuleVis" ref="FFTrackerModuleVis" visible="true" showDaughters="false" />
<comment>
ECal Vis
......@@ -44,6 +65,12 @@
<vis name="EcalEndcapNModuleVis" ref="AnlGold" showDaughters="false" visible="true"/>
<vis name="FFPreVis" ref="AnlGold" showDaughters="true" visible="true"/>
<vis name="FFPreLayerVis" ref="FFPreVis" showDaughters="true" visible="true"/>
<vis name="FFPreModuleVis" ref="FFPreLayerVis" showDaughters="true" visible="true"/>
<vis name="FFPreRadiatorVis" ref="FFPreModuleVis" showDaughters="true" visible="true"/>
<vis name="FFPreReadoutVis" ref="FFTrackerSurfaceVis" showDaughters="true" visible="true"/>
<comment>
HCal Vis
</comment>
......@@ -53,7 +80,7 @@
<vis name="HcalBarrelLayerVis" ref="AnlBlue" showDaughters="true" visible="true"/>
<vis name="HcalEndcapVis" ref="AnlBlue" showDaughters="false" visible="true"/>
<vis name="HcalEndcapLayerVis" ref="AnlBlue" showDaughters="true" visible="true"/>
<vis name="HcalSensorVis" ref="AnlBlue" showDaughters="true" visible="true"/>
<vis name="HcalSensorVis" ref="AnlBlue" showDaughters="true" visible="true"/>
<vis name="HcalAbsorberVis" ref="AnlGray" showDaughters="true" visible="true"/>
<comment>
......@@ -82,20 +109,31 @@
<vis name="DIRCBarVis" ref="AnlTeal" showDaughters="true" visible="true"/>
<comment>
Beam line
Beam line with magnets
</comment>
<vis name="BeamPipeVis" ref="AnlLightGray" showDaughters="true" visible="true"/>
<vis name="FFMagnetVis" ref="AnlGreen" showDaughters="true" visible="true"/>
<vis name="FFMagnetCoilVis" ref="AnlRed" showDaughters="true" visible="true"/>
<comment>
ZDC visualization
</comment>
<vis name="BeamPipeVis" ref="AnlLight_Gray" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_ECAL_Vis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_ECAL_module_Vis" alpha="1.0" r= "0.1" g="1.0" b="0.9" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_HCAL_Vis" alpha="0.1" r= "0.1" g="0.0" b="1.0" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_ECAL_Vis" ref="AnlGreen" showDaughters="true" visible="true"/>
<vis name="ffi_ZDC_ECAL_module_Vis" ref="AnlRed" showDaughters="false" visible="true"/>
<vis name="ffi_ZDC_HCAL_Vis" ref="AnlBlue" showDaughters="true" visible="true"/>
<comment>
PID visualization
</comment>
<vis name="DRICH_vessel_vis" ref="AnlGray" showDaughters="true" visible="true" />
<vis name="DRICH_gas_vis" ref="AnlGreen" alpha="0.5" showDaughters="true" visible="true" />
<vis name="DRICH_gas_vis" ref="AnlLightGray" alpha="0.2" showDaughters="true" visible="true" />
<vis name="DRICH_aerogel_vis" ref="AnlTeal" showDaughters="true" visible="true" />
<vis name="DRICH_filter_vis" alpha="1.0" r="1.0" g="1.0" b="0.0" showDaughters="true" visible="true" />
<vis name="DRICH_mirror_vis" ref="AnlGray" showDaughters="true" visible="true" />
<vis name="DRICH_sensor_vis" ref="AnlGreen" showDaughters="true" visible="true" />
<vis name="PFRICH_sensor_vis" ref="AnlGreen" showDaughters="true" visible="true" /> <!-- invisible, to speedup graphics -->
<vis name="MRICH_aerogel_vis" ref="AnlTeal" showDaughters="true" visible="true" />
<vis name="MRICH_frame_vis" ref="AnlGold" showDaughters="true" visible="true" />
......
compact/drich.xml
View file @ 1008a184
......@@ -3,10 +3,10 @@
<define>
<!-- vessel (=snout+tank) geometry -->
<constant name="DRICH_zmin" value="ForwardPIDRegion_zmin"/> <!-- vessel front -->
<constant name="DRICH_Length" value="ForwardPIDRegion_length"/> <!-- overall vessel length (including snout) -->
<constant name="DRICH_rmin0" value="ForwardPIDRegion_zmin * ForwardPIDRegion_tan1"/> <!-- bore radius at dRICh vessel frontplane -->
<constant name="DRICH_rmin1" value="(ForwardPIDRegion_zmin + ForwardPIDRegion_length) * ForwardPIDRegion_tan2"/> <!-- bore radius at dRICh vessel backplane -->
<constant name="DRICH_zmin" value="ForwardRICHRegion_zmin"/> <!-- vessel front -->
<constant name="DRICH_Length" value="ForwardRICHRegion_length"/> <!-- overall vessel length (including snout) -->
<constant name="DRICH_rmin0" value="ForwardRICHRegion_zmin * ForwardRICHRegion_tan1"/> <!-- bore radius at dRICh vessel frontplane -->
<constant name="DRICH_rmin1" value="(ForwardRICHRegion_zmin + ForwardRICHRegion_length) * ForwardRICHRegion_tan2"/> <!-- bore radius at dRICh vessel backplane -->
<constant name="DRICH_wall_thickness" value="0.5*cm"/> <!-- thickness of radial walls -->
<constant name="DRICH_window_thickness" value="0.1*cm"/> <!-- thickness of entrance and exit walls -->
<!-- tank geometry: cylinder, holding the majority of detector components -->
......@@ -94,13 +94,14 @@
filter; the filter is applied to the back of the aerogel, so that it separates
the aerogel and gas radiators
- dimensions:
- `frontplane`: front of the aerogel, w.r.t. front plane of the vessel envelope
- `rmin` and `rmax`: inner and outer radius (at the front plane; radial bounds are conical)
- `phiw`: azimuthal width of wedge
- `thickness`: radiator thickness, defined separately for aerogel and filter
- `frontplane`: front of the aerogel, w.r.t. front plane of the vessel envelope
- `pitch`: controls the angle of the radiator (0=vertical)
</documentation>
<radiator
rmin="DRICH_rmin0 + DRICH_wall_thickness + 2.0*cm"
rmin="DRICH_rmin0 + DRICH_wall_thickness + 0.2*cm"
rmax="DRICH_rmax0 - DRICH_wall_thickness - 0.2*cm"
phiw="60*degree"
frontplane="DRICH_window_thickness + 0.5*DRICH_aerogel_thickness"
......@@ -142,17 +143,16 @@
material="Acrylic_DRICH"
surface="MirrorSurface_DRICH"
vis="DRICH_mirror_vis"
backplane="DRICH_window_thickness + 5.0*cm"
backplane="DRICH_window_thickness + 1.0*cm"
rmin="DRICH_rmin1 + DRICH_wall_thickness - 1.0*cm"
rmax="DRICH_rmax2 - DRICH_wall_thickness - 5.0*cm"
rmax="DRICH_rmax2 - DRICH_wall_thickness - 1.0*cm"
phiw="59.5*degree"
thickness="0.2*cm"
focus_tune_x="40.0*cm"
focus_tune_z="-30.0*cm"
focus_tune_x="30.0*cm"
focus_tune_z="-40.0*cm"
debug="DRICH_debug_mirror"
/>
<!-- /detectors/detector/sensors -->
<documentation level="10">
#### Sensors
......@@ -205,14 +205,14 @@
- `zmin`: z-plane cut
</documentation>
<sphere
centerz="-80.0 * cm"
centerz="-55.0 * cm"
centerx="DRICH_rmax2 - 35.0*cm"
radius="100.0 * cm"
radius="85.0 * cm"
debug="DRICH_debug_sensors"
/>
<sphericalpatch
phiw="18*degree"
rmin="DRICH_rmax1 + 0.0*cm"
rmin="DRICH_rmax1 + 5.0*cm"
rmax="DRICH_rmax2 - 5.0*cm"
zmin="DRICH_SnoutLength + 5.0*cm"
/>
......