README.md

Programming FPGA firmware/flash

FPGA firmware bitstreams reside in the /Firmware folder

1. Connect the Xilinx Platform Programmer cable to the FPGA board (using the 14pin dual row ribbon cable, follow the polarization tab)
2. Using Xilinx Vivado, open hardware manager
3. Connect to the cable and make sure the XC7A200T FPGA is seen.
4. Right click and add a configuration memory to the FPGA (Choose: Micron, 256Mb, SPIx1, +1.8V chip)
5. Add the .bin bitstream file from the /Firmware folder and program (normally the erase, program, verify steps should be enabled).