Forked from
EIC / detectors / athena
298 commits behind the upstream repository.
-
Whitney Armstrong authorednew file: compact/B0_tracker.xml modified: compact/definitions.xml modified: reference_detector.xml new file: src/ref_RectangularTracker_geo.cpp
f87c4897
definitions.xml 27.40 KiB
<define>
<constant name="world_side" value="30*m"/>
<constant name="world_x" value="world_side"/>
<constant name="world_y" value="world_side"/>
<constant name="world_z" value="100*m"/>
<comment>Although not explicit in the EIC design study, the crossing angle is not symmetric.</comment>
<constant name="CrossingAngle" value="0.025"/>
<constant name="ionCrossingAngle" value="0.0166667"/>
<constant name="electronCrossingAngle" value="0.00833333"/>
<constant name="CrossingSlope" value="0.0166682"/>
<constant name="Pi" value="3.14159265359"/>
<constant name="mil" value="0.0254*mm"/>
<comment>
------------
Detector IDs
------------
Note about ACTS tracking geometry construction
----------------------------------------------
The tracking surfaces need to be structured in a barrel + endcapP + endcapN where
endcapP/endcapN are the endcaps at positive/negative z values.
See https://acts.readthedocs.io/en/latest/plugins/dd4hep.html for more details.
The tracking geometry needs to be constructed from cylinders from the inside out. For this reason
each layer needs its own subsystem assembly. This increases the number of top level system IDs.
For example the silicon tracker needs 3 IDs for each area (endcap+barrel+endcap) and a subassembly for each
layer. Therefore it needs a minimum of 20 IDs. Therefore we will allocate blocks of ~25 for each major subsystem.
Note, future improvements will likely include a more sophisticated ACTS-dd4hep plugin,
eliminating the need for so many system IDs at construction time.
This barrel/endcap structure needs IDs to be in increasing order going outward.
The space of IDs for the subassemblies starts at (Subassembly_ID*10+101).
The unused IDs below are saved for future use.
</comment>
<comment>
===================
(1-9) Reserved IDs
===================
Unused IDs: 1-9
====================================
(10-24) Interaction region beamline
====================================
Beampipe ID : 10
Unused IDs: 11-24
</comment>
<constant name="BeamPipe_ID" value="10"/>
<comment>
===============================
(25-49) Silicon Vertex Tracker
===============================
SiVertex subsystem ID: 25
Layer 1 subassembly ID: 26
Layer 2 subassembly ID: 27
Layer 3 subassembly ID: 28
Layer 4 subassembly ID: 29
Layer 5 subassembly ID: 30
</comment> <constant name="SiVertexSubAssembly_ID" value="25"/>
<comment>
Unused values reserved for vertex:
constant name="SiVertexSubAssemblyLayer1_ID" value="121"
constant name="SiVertexSubAssemblyLayer2_ID" value="122"
constant name="SiVertexSubAssemblyLayer3_ID" value="123"
constant name="SiVertexSubAssemblyLayer4_ID" value="124"
constant name="SiVertexSubAssemblyLayer5_ID" value="125"
</comment>
<comment>
===============================
(50-74) Silicon Tracker System
===============================
SiTracker subsystem ID: 50
Layer 1 subassembly ID: 51
Layer 2 subassembly ID: 52
Layer 3 subassembly ID: 53
Layer 4 subassembly ID: 54
Layer 5 subassembly ID: 55
(56-70) etc...
Unused IDs: 71-74
</comment>
<constant name="SiTrackerSubAssembly_ID" value="50"/>
<constant name="SiTrackerSubAssemblyLayer1_ID" value="51"/>
<constant name="SiTrackerSubAssemblyLayer2_ID" value="52"/>
<constant name="SiTrackerSubAssemblyLayer3_ID" value="53"/>
<constant name="SiTrackerSubAssemblyLayer4_ID" value="54"/>
<constant name="SiTrackerSubAssemblyLayer5_ID" value="55"/>
<constant name="SiTrackerBarrel_Layer1_ID" value="56"/>
<constant name="SiTrackerEndcapP_Layer1_ID" value="57"/>
<constant name="SiTrackerEndcapN_Layer1_ID" value="58"/>
<constant name="SiTrackerBarrel_Layer2_ID" value="59"/>
<constant name="SiTrackerEndcapP_Layer2_ID" value="60"/>
<constant name="SiTrackerEndcapN_Layer2_ID" value="61"/>
<constant name="SiTrackerBarrel_Layer3_ID" value="62"/>
<constant name="SiTrackerEndcapP_Layer3_ID" value="63"/>
<constant name="SiTrackerEndcapN_Layer3_ID" value="64"/>
<constant name="SiTrackerBarrel_Layer4_ID" value="65"/>
<constant name="SiTrackerEndcapP_Layer4_ID" value="66"/>
<constant name="SiTrackerEndcapN_Layer4_ID" value="67"/>
<constant name="SiTrackerBarrel_Layer5_ID" value="68"/>
<constant name="SiTrackerEndcapP_Layer5_ID" value="69"/>
<constant name="SiTrackerEndcapN_Layer5_ID" value="70"/>
<constant name="cb_CTD_Si_ID" value="74"/>
<comment>
===================
(75-99) Reserved IDs
===================
Unused IDs: 75-89
TBD
</comment>
<comment>
======================
(90-99) Barrel PID IDs
======================
DIRC subsystem ID: 90
Barrel TRD subsystem ID: 91
Barrel TOF subsystem ID: 92
Unused IDs: 93-99
</comment>
<constant name="BarrelDIRC_ID" value="90"/>
<constant name="BarrelTRD_ID" value="91"/>
<constant name="BarrelTOF_ID" value="92"/>
<comment>
=====================================
(100-109) Electromagnetic Calorimeter
=====================================
ECal subsystem ID: 100
Barrel subassembly ID: 101
EndcapP subassembly ID: 102
EndcapN subassembly ID: 103
Crystal subassembly ID: 104
Unused IDs: 105-109
</comment>
<constant name="ECalSubAssembly_ID" value="100"/>
<constant name="ECalBarrel_ID" value="101"/>
<constant name="ECalEndcapP_ID" value="102"/>
<constant name="ECalEndcapN_ID" value="103"/>
<constant name="CrystalEndcap_ID" value="104"/>
<comment>
=====================================
(110-119) Hadronic Calorimeter
=====================================
HCal subsystem ID: 110
Barrel subassembly ID: 111
EndcapP subassembly ID: 112
EndcapN subassembly ID: 113
Unused IDs: 115-119
</comment>
<constant name="HCalSubAssembly_ID" value="110"/>
<constant name="HCalBarrel_ID" value="111"/>
<constant name="HCalEndcapP_ID" value="112"/>
<constant name="HCalEndcapN_ID" value="113"/>
<constant name="ci_HCAL_id" value="200"/>
<comment>
=====================================
(120-129) (near) Forward reserved
=====================================
Forwardtracking ID: 120
Forward RICH ID: 121
Unused IDs: 124-129
</comment>
<constant name="ForwardTracking_ID" value="120"/>
<constant name="ForwardRICH_ID" value="121"/>
<constant name="ci_GEM_id" value="122"/>
<constant name="ForwardTRD_ID" value="123"/>
<comment>
=====================================
(130-139) Backward reserved
=====================================
Modular RICH ID: 130
Electron Endcap GEM tracking ID: 131 Unused IDs: 132-139
</comment>
<constant name="ce_MRICH_ID" value="130"/>
<constant name="ce_GEM_ID" value="131"/>
<comment>
=====================================
(140-149) Central Magnet
=====================================
Solenoid ID: 140
Solenoid support ID: 141
Solenoid Yoke ID: 142
Unused IDs: 143-149
</comment>
<constant name="Solenoid_ID" value="140"/>
<constant name="SolenoidSupport_ID" value="141"/>
<constant name="SolenoidYoke_ID" value="142"/>
<comment>
=====================================
(150-169) Far Forward Detectors
=====================================
Forward Roman Pot ID: 150
Forward B0 Tracker ID: 151
Zero Degree Cal. ID: 160
</comment>
<constant name="ForwardRomanPot_ID" value="150"/>
<constant name="B0Tracker_ID" value="151"/>
<constant name="ffi_ZDC_ID" value="160"/>
<comment>
=====================================
(170-189) Forward Beamline Magnets
=====================================
</comment>
<comment>
=====================================
(190-199) Backward Beamline Magnets
=====================================
</comment>
<comment>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Detector Definition Parameters
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
## Parameter nomenclature
- "rmin", "rmax", "thickness" all refer to the radial direction.
- "zmin", "zmax", "length", "offset" all refer to the z direction.
- Positive and Negative are "EndcapP" and "EndcapN", respectively.
- All values are positive. When refering to a negative endcap z position, the values are
also positive then negated when required. (Many endcap constructions are mirrored,
hence a postive value.
- We will try to keep the subsystem component name first and the parameter after an "_" (eg, EcalBarrel_length").
TODO: fix parameter naming to be uniform in the above convention.
</comment>
<comment>
==========================
Solenoid Magnet Parameters
========================== </comment>
<constant name="Solenoid_length" value="7000.0*mm"/>
<constant name="Solenoid_rmin" value="3000.0*mm"/>
<constant name="Solenoid_thickness" value="400*mm"/>
<constant name="Solenoid_offset" value="600.0*mm"/>
<constant name="Solenoid_rmax" value="Solenoid_rmin + Solenoid_thickness"/>
<constant name="SolenoidBarrel_rmin" value="Solenoid_rmin"/>
<constant name="SolenoidBarrel_length" value="Solenoid_length"/>
<constant name="SolenoidBarrel_zmax" value="Solenoid_length/2.0"/>
<comment>
--------------------------------
Key Central Detector Parameters
--------------------------------
These are needed here to compute the dependent parameters.
</comment>
<constant name="ForwardRICH_length" value="1.1*m"/>
<constant name="ForwardTRD_length" value="20.0*cm"/>
<constant name="ForwardTOF_length" value="10.0*cm"/>
<constant name="BackwardCherenkovLength" value="15.0*cm"/>
<constant name="BackwardTOFLength" value="10.0*cm"/>
<comment> Total length of PID detectors above</comment>
<constant name="ForwardPIDLength" value="ForwardRICH_length + ForwardTRD_length + ForwardTOF_length"/>
<constant name="BackwardPIDLength" value="BackwardCherenkovLength + BackwardTOFLength"/>
<comment> Barrel PID thicknesses</comment>
<constant name="BarrelExtraPIDThickness" value="25.0 * cm"/>
<constant name="BarrelTRDThickness" value="25.0 * cm"/>
<constant name="BarrelTOFThickness" value="1.0 * cm"/>
<comment>
============================
Tracking Detector Parameters
============================
</comment>
<comment>
-------------------------
GEM Tracker Parameters
-------------------------
</comment>
<constant name="ForwardTrackingGEMLength" value="30.0*cm"/>
<comment>
-------------------------
Vertex Tracker Parameters
-------------------------
</comment>
<constant name="VertexTrackerInnerRadius" value="30.0*mm"/>
<constant name="VertexTrackerOuterRadius" value="90.0*mm"/>
<constant name="VertexTrackerOuterBarrelLength" value="400.0*mm"/>
<comment>
--------------------------
Silicon Tracker Parameters
--------------------------
</comment>
<constant name="SiliconTrackerInnerRadius" value="95.0*mm"/>
<constant name="SiliconTrackerInnerBarrelLength" value="300.0*mm"/>
<constant name="SiliconTrackerOuterRadius" value="Solenoid_rmax/3.0"/>
<constant name="SiliconTrackerOuterBarrelLength" value="Solenoid_length/2.5"/>
<constant name="SiliconTrackerOuterBarrel_zmax" value="SiliconTrackerOuterBarrelLength/2.0"/>
<comment>
Central tracking boundaries
The central tracking detectors are assumed to be symmtric about the origin.
</comment>
<constant name="CentralTracking_rmax" value="SiliconTrackerOuterRadius"/>
<constant name="CentralTracking_length" value="SiliconTrackerOuterBarrelLength + ForwardTrackingGEMLength"/>
<comment> These are used by ddsim </comment>
<constant name="tracker_region_rmax" value="Solenoid_rmax/2.0"/>
<constant name="tracker_region_zmax" value="Solenoid_length/2.0"/>
<comment>
-------------------------------
Central Barrel Tracker - Global
-------------------------------
The cb_CTD_* parameters can probably be moved to the detector specific xml file.
</comment>
<constant name="cb_CTD_rmin" value="SiliconTrackerInnerRadius"/>
<constant name="cb_CTD_rmax" value="SiliconTrackerOuterRadius"/>
<constant name="cb_CTD_zmax" value="SiliconTrackerOuterBarrel_zmax"/>
<constant name="cb_CTD_length" value="SiliconTrackerOuterBarrelLength"/>
<comment>
------------
Calorimeters
------------
======================
Calorimeter Parameters
======================
</comment>
<comment>
Ecal and Hcal Barrel/Endcap
</comment>
<constant name="ExtraHcalEndcapP_length" value="0.0*cm"/>
<constant name="ExtraHcalEndcapN_length" value="0.0*cm"/>
<constant name="SolenoidYokeEndcapP_zmin" value="Solenoid_length/2.0 + Solenoid_offset+ExtraHcalEndcapP_length"/>
<constant name="SolenoidYokeEndcapN_zmin" value="Solenoid_length/2.0 - Solenoid_offset+ExtraHcalEndcapN_length"/>
<constant name="EcalBarrel_rmin" value="SiliconTrackerOuterRadius + BarrelExtraPIDThickness + 5.0 * mm"/>
<constant name="HcalBarrel_rmax" value="Solenoid_rmin - 10.0 *cm "/>
<constant name="Barrel_TotalCalThickness" value="HcalBarrel_rmax - EcalBarrel_rmin"/>
<constant name="CalBarrelDivider" value="0.5"/> <comment> Ecal and Hcal have the same thickness </comment>
<constant name="EcalBarrel_TotalThickness" value="Barrel_TotalCalThickness * CalBarrelDivider"/>
<constant name="HcalBarrel_TotalThickness" value="Barrel_TotalCalThickness * (1.0 - CalBarrelDivider)"/>
<constant name="EcalBarrelLength" value="CentralTracking_length + BackwardPIDLength"/>
<constant name="EcalBarrel_offset" value="(CentralTracking_length -(CentralTracking_length+BackwardPIDLength))/2.0"/>
<constant name="EcalEndcapP_zmin" value="CentralTracking_length/2.0 + ForwardPIDLength"/>
<constant name="EcalEndcapN_zmin" value="CentralTracking_length/2.0 + BackwardPIDLength"/>
<constant name="BarrelLength" value="SiliconTrackerOuterBarrelLength + ForwardPIDLength + BackwardPIDLength"/>
<constant name="Barrel_offset" value="(EcalEndcapP_zmin-EcalEndcapN_zmin)/2.0"/>
<constant name="EndcapPTotalCal_length" value="(SolenoidYokeEndcapP_zmin - 0.0 * mm) - (EcalEndcapP_zmin + 20.0 * mm)"/>
<constant name="EndcapNTotalCal_length" value="(SolenoidYokeEndcapN_zmin - 0.0 * mm) - (EcalEndcapN_zmin + 20.0 * mm)"/>
<constant name="EndcapP_CalDivide" value="0.5"/> <comment> 0.5 means Ecal and Hcal have the same thickness </comment>
<constant name="EndcapN_CalDivide" value="0.5"/> <comment> 0.5 means Ecal and Hcal have the same thickness </comment>
<constant name="EcalEndcapP_length" value="EndcapPTotalCal_length * EndcapP_CalDivide"/>
<constant name="EcalEndcapN_length" value="EndcapNTotalCal_length * EndcapN_CalDivide"/>
<constant name="HcalEndcapP_length" value="EndcapPTotalCal_length * (1.0 - EndcapP_CalDivide)"/>
<constant name="HcalEndcapN_length" value="EndcapNTotalCal_length * (1.0 - EndcapN_CalDivide)"/>
<comment> These need to be set in sync with the forward and backward detectors </comment>
<constant name="EcalEndcapP_rmin" value="200.0*mm"/>
<constant name="EcalEndcapN_rmin" value="300.0*mm"/>
<constant name="HcalEndcapP_rmin" value="EcalEndcapP_rmin"/>
<constant name="HcalEndcapN_rmin" value="EcalEndcapN_rmin"/>
<comment>
-------------------------
EM Calorimeter Parameters
-------------------------
## Note about Calormieter parameterization.
The logic goes like this:
1. The space for the calorimeter is fixed via parameterization above.
2. The layer thicknesses are fixed (first parameters below)
3. From the space/thickness the number of layers is computed.
</comment>
<constant name="CaloSides" value="12"/>
<comment>Material Thickness</comment>
<constant name="EcalSiliconThickness" value="9.00 * mm" />
<constant name="EcalCopperThickness" value="0.05 * mm" />
<constant name="EcalKaptonThickness" value="0.30 * mm" />
<constant name="EcalAir1Thickness" value="0.33 * mm" />
<constant name="EcalAir2Thickness" value="0.25 * mm" />
<constant name="EcalThinTungstenThickness" value="2.50 * mm" />
<constant name="EcalThickTungstenThickness" value="5.00 * mm" />
<comment> Layer Thickness </comment>
<constant name="EcalLayer1_thickness"
value="EcalSiliconThickness + EcalCopperThickness + EcalKaptonThickness + EcalAir1Thickness"/>
<constant name="EcalLayer2_thickness"
value="EcalThinTungstenThickness + EcalAir2Thickness + EcalSiliconThickness + EcalCopperThickness + EcalKaptonThickness + EcalAir1Thickness"/>
<constant name="EcalLayer3_thickness"
value="EcalThickTungstenThickness + EcalAir2Thickness + EcalSiliconThickness + EcalCopperThickness + EcalKaptonThickness + EcalAir1Thickness"/>
<comment> EM Barrel N Layer; same number of layers for EcalThin and EcalThick</comment>
<constant name="EcalBarrelLayers"
value="floor((EcalBarrel_TotalThickness - EcalLayer1_thickness) / (EcalLayer2_thickness + EcalLayer3_thickness))"/>
<constant name="EcalBarrelLayer1_NRepeat" value="1"/>
<constant name="EcalBarrelLayer2_NRepeat" value="EcalBarrelLayers"/>
<constant name="EcalBarrelLayer3_NRepeat" value="EcalBarrelLayers"/>
<comment> EM Barrel Thickness </comment>
<constant name="EcalBarrelThickness"
value="EcalBarrelLayer1_NRepeat*EcalLayer1_thickness + EcalBarrelLayer2_NRepeat * EcalLayer2_thickness + EcalBarrelLayer3_NRepeat * EcalLayer3_thickness"/>
<constant name="EcalBarrel_rmax" value="EcalBarrel_rmin + EcalBarrelThickness"/>
<comment> EM Endcap N Layer; same number of layers for EcalThin and EcalThick </comment>
<constant name="EcalEndcapPLayers"
value="floor((EcalEndcapP_length - EcalLayer1_thickness) / (EcalLayer2_thickness + EcalLayer3_thickness))"/>
<constant name="EcalEndcapNLayers"
value="floor((EcalEndcapN_length - EcalLayer1_thickness) / (EcalLayer2_thickness + EcalLayer3_thickness))"/>
<constant name="EcalEndcapPLayer1_NRepeat" value="1"/>
<constant name="EcalEndcapNLayer1_NRepeat" value="1"/>
<constant name="EcalEndcapPLayer2_NRepeat" value="EcalEndcapPLayers"/>
<constant name="EcalEndcapPLayer3_NRepeat" value="EcalEndcapPLayers"/>
<constant name="EcalEndcapNLayer2_NRepeat" value="EcalEndcapNLayers"/>
<constant name="EcalEndcapNLayer3_NRepeat" value="EcalEndcapNLayers"/>
<comment> EM Endcap Thickness </comment>
<constant name="EcalEndcapPThickness"
value="EcalEndcapPLayer1_NRepeat*EcalLayer1_thickness + EcalEndcapPLayer2_NRepeat*EcalLayer2_thickness + EcalEndcapPLayer3_NRepeat*EcalLayer3_thickness "/> <constant name="EcalEndcapNThickness"
value="EcalEndcapNLayer1_NRepeat*EcalLayer1_thickness + EcalEndcapNLayer2_NRepeat*EcalLayer2_thickness + EcalEndcapNLayer3_NRepeat*EcalLayer3_thickness"/>
<comment>
-------------------------------
Hadronic Calorimeter Parameters
-------------------------------
</comment>
<constant name="HcalBarrel_rmin" value="EcalBarrel_rmax"/>
<constant name="HcalBarrelAvailThickness" value="HcalBarrel_rmax - HcalBarrel_rmin"/>
<constant name="HcalBarrelLength" value="Solenoid_length + ExtraHcalEndcapP_length + ExtraHcalEndcapN_length- HcalEndcapP_length- HcalEndcapN_length - 10*cm"/>
<constant name="HcalEndcapP_zmin" value="SolenoidYokeEndcapP_zmin - HcalEndcapP_length "/>
<constant name="HcalEndcapN_zmin" value="SolenoidYokeEndcapN_zmin - HcalEndcapN_length "/>
<comment> Material Thickness </comment>
<constant name="HcalSteelThickness" value="1.89 * cm"/>
<constant name="HcalPyrexThickness" value="1.10 * mm"/>
<constant name="HcalRPCGasThickness" value="1.20 * mm"/>
<constant name="HcalG10Thickness" value="3.00 * mm"/>
<constant name="HcalAirThickness" value="1.60 * mm"/>
<comment> Single Layer Thickness (for both barrel and endcap)</comment>
<constant name="HcalSingleLayerThickness"
value="HcalSteelThickness + (2 * HcalPyrexThickness) + HcalRPCGasThickness + HcalG10Thickness + HcalAirThickness"/>
<comment> Hcal Barrel Layers and computed Thickness </comment>
<constant name="HcalBarrelLayer_NRepeat" value="floor(HcalBarrelAvailThickness / HcalSingleLayerThickness)"/>
<constant name="HcalBarrelThickness" value="HcalBarrelLayer_NRepeat * HcalSingleLayerThickness"/>
<comment> Hcal Endcap Layers and computed Thickness </comment>
<constant name="HcalEndcapPLayer_NRepeat" value="floor(HcalEndcapP_length / HcalSingleLayerThickness)"/>
<constant name="HcalEndcapNLayer_NRepeat" value="floor(HcalEndcapN_length / HcalSingleLayerThickness)"/>
<constant name="HcalEndcapP_thickness" value="HcalEndcapPLayer_NRepeat * HcalSingleLayerThickness"/>
<constant name="HcalEndcapN_thickness" value="HcalEndcapNLayer_NRepeat * HcalSingleLayerThickness"/>
<comment>
----------------------
Zero Degree Parameters
----------------------
</comment>
<comment> BeamLines: IP6 </comment>
<constant name="ffi_ZDC_x_pos" value="90.0 * cm"/>
<constant name="ffi_ZDC_y_pos" value="0.0 * cm"/>
<constant name="ffi_ZDC_z_pos" value="3800.0 * cm"/>
<constant name="ffi_ZDC_rotateX_angle" value="0.0 * rad"/>
<constant name="ffi_ZDC_rotateY_angle" value="-0.0125 * rad"/>
<constant name="ffi_ZDC_rotateZ_angle" value="0.0 * rad"/>
<comment> BeamLines: IP8 </comment>
<!--
<constant name="ffi_ZDC_x_pos" value="127.0 * cm"/>
<constant name="ffi_ZDC_y_pos" value="0.0 * cm"/>
<constant name="ffi_ZDC_z_pos" value="3600.0 * cm"/>
<constant name="ffi_ZDC_rotateX_angle" value="0.0 * rad"/>
<constant name="ffi_ZDC_rotateY_angle" value="-0.025 * rad"/>
<constant name="ffi_ZDC_rotateZ_angle" value="0.0 * rad"/>
-->
<comment> Global parameters </comment>
<constant name="ffi_ZDC_width" value="60.0 * cm"/>
<constant name="ffi_ZDC_thickness" value="200.0 * cm"/>
<comment> Original Global parameters </comment>
<!--
<constant name="ffi_ZDC_thickness" value="250.0 * cm"/>
-->
<constant name="ffi_ZDC_ECAL_thickness" value="30.0 * cm"/>
<constant name="ffi_ZDC_ECAL_inner_radius" value="0.0 * cm"/>
<constant name="ffi_ZDC_ECAL_outer_radius" value="60.0 * cm"/> <constant name="ffi_ZDC_ECAL_width" value="5.0 * cm"/>
<constant name="ffi_ZDC_ECAL_gap" value="5.0 * mm"/>
<constant name="ffi_ZDC_ECAL_ntower" value="10"/>
<comment> Original number of towers parameter </comment>
<!--
<constant name="ffi_ZDC_ECAL_ntower" value="20"/>
-->
<comment>
-----------------------
Gaseous RICH Parameters
-----------------------
</comment>
<constant name="ForwardRICH_zmin" value="SiliconTrackerOuterBarrel_zmax + 1 * cm"/>
<constant name="ForwardRICH_rmin" value="15 * cm"/>
<constant name="ForwardRICH_rmax0" value="SiliconTrackerOuterRadius"/>
<constant name="ForwardRICH_rmax1" value="EcalBarrel_rmin"/>
<constant name="ForwardRICH_rmax2" value="SolenoidBarrel_rmin-2*cm"/>
<constant name="ForwardRICHDepth" value="0.9*m"/>
<comment>
--------------------------
Forward Tracker Parameters
--------------------------
</comment>
<comment>
--------------------------
Forward ECal Parameters
--------------------------
</comment>
<comment>
--------------------------
Forward HCal Parameters
--------------------------
</comment>
<comment>
--------------------------
ce_MRICH Parameters
--------------------------
</comment>
<constant name="ce_MRICHRMin" value="15*cm"/>
<constant name="ce_MRICHRMax" value="100*cm"/>
<constant name="ce_MRICHLength" value="BackwardCherenkovLength"/>
<constant name="ce_MRICHZMin" value="-EcalEndcapN_zmin+ce_MRICHLength"/>
<comment>
------------------
ce_GEM Parameters
------------------
</comment>
<constant name="ce_GEM_rmin" value="10.0 * cm"/> <comment> temporary number. Need beampipe radius </comment>
<!--<constant name="ce_GEM_rmin" value="0.0 * cm"/>-->
<constant name="ce_GEM_rmax" value="HcalEndcapN_rmin + 8.0 * cm"/> <comment> temporary number to avoid overlaps </comment>
<!--<constant name="ce_GEM_rmax" value="45.0 * cm + 50.0 * cm"/>-->
<constant name="ce_GEM_length" value="30.0 * cm"/>
<constant name="ce_GEM_x_pos" value="0.0 * cm"/>
<constant name="ce_GEM_y_pos" value="0.0 * cm"/>
<constant name="ce_GEM_z_pos" value="-Solenoid_length/2.0 + ce_GEM_length/2.0"/>
<constant name="ce_GEM_layer" value="8"/>
<constant name="ce_GEM_layer_thickness" value="1.0 * cm"/>
<comment>
--------------------------
Central Ion HCal Parameters --------------------------
</comment>
<constant name="ci_HCAL_rin" value="90 * cm"/><comment> Orginally 0, changed to not overlap solenoid </comment>
<constant name="ci_HCAL_rout" value="300 * cm"/>
<constant name="ci_HCAL_sizez" value="160 * cm"/>
<constant name="ci_HCAL_shiftz" value="5 * cm"/>
<constant name="ci_HCAL_posz" value="0 * cm"/>
<constant name="ci_HCAL_nlayers" value="20"/>
<constant name="ci_HCAL_lay_rin" value="ci_HCAL_rin"/> <comment> Orginally 80cm, changed to not overlap solenoid </comment>
<constant name="ci_HCAL_lay_rout" value="ci_HCAL_rout - 1 * cm"/>
<constant name="ci_HCAL_lay_thickness" value="2* cm"/>
<constant name="ci_HCAL_lay_gapz" value="2* cm"/>
<comment>
--------------------------
Central Ion GEM Parameters
--------------------------
</comment>
<constant name="ci_GEM_rin" value="10 * cm"/>
<constant name="ci_GEM_rout" value="95 * cm"/>
<constant name="ci_GEM_sizez" value="30 * cm"/>
<constant name="ci_GEM_shiftz" value="0 * cm"/>
<constant name="ci_GEM_posz" value="0 * cm"/>
<constant name="ci_GEM_posx" value="0 * cm"/>
<constant name="ci_GEM_nlayers" value="8"/>
</define>