Modified the file to remove the old method of downloading the conatiner and...

Modified the file to remove the old method of downloading the conatiner and added the singularity website for ease of acccess.

src/docs/getting-started/quickstart.mdx

@@ -18,19 +18,25 @@ This tutorial requires that [singularity](singularity) is installed
 on the system. We also assumes [modulefiles](modulefiles) can be 
 used but are not required.
 
+Singularity can be downloaded by going to
+https://sylabs.io/guides/3.7/user-guide/quick_start.html , with 3.7 being the 
+most recent version as of January 2021.
+ 
+
 ## The EIC Software Container
+To properly emulate the EIC enviornmant a container containing necessary 
+software is needed. 
 
 Installing the [eic_container](quickstart/eic_container) is done with the 
 following:
 
 ```shell
 git clone https://eicweb.phy.anl.gov/containers/eic_container.git
-mkdir eic_container/build 
-cd eic_container/build 
-cmake ../. -DCMAKE_INSTALL_PREFIX=$HOME/stow/eic_container_1.0.4
-make -j4 install
 ```
 
+From here follow the instructions in the README file. Those will faithfully
+install the container, and then follow the instructions below.
+
 Inspect the list of files installed, noting the locations of modulefiles and 
 wrapper scripts.