diff --git a/DBASE/standard.kinematics b/DBASE/standard.kinematics
index 332dde9d63e3cea9e9af08173e54e2de2ae92f40..defaf2c4cef622549f0a9b178a7b06a084003d7b 100644
--- a/DBASE/standard.kinematics
+++ b/DBASE/standard.kinematics
@@ -1,9 +1,9 @@
 1-99999
-gpbeam=999
-gtarg_num = 999
-htheta_lab = 999
-stheta_lab = 999
-hpcentral = 999
-spcentral = 999
+gpbeam=6.
+gtarg_num = 1
+htheta_lab = 15.
+ptheta_lab = 15.
+hpcentral = 2.
+ppcentral = 2.
 hpartmass = 0.00051099
-spartmass = 0.00051099
+ppartmass = 0.00051099
diff --git a/PARAM/SHMS/CAL/pcal.param b/PARAM/SHMS/CAL/pcal.param
index e9a664e001cfe712214b74e44bef091a7c330e71..de0a7f572dd3c3f2f7eb71500798716aec710b77 100644
--- a/PARAM/SHMS/CAL/pcal.param
+++ b/PARAM/SHMS/CAL/pcal.param
@@ -62,19 +62,3 @@ pcal_neg_gain_cor=1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0
 
 pcal_min_peds = 500
 
-; Parameters we need to keep THcHallCSpectrometer Happy
-p_recon_coeff_filename = ""
-ptheta_offset = 0.0
-pphi_offset = 0.0
-pdelta_offset = 0.0
-pthetacentral_offset = 0.0
-p_oopcentral_offset = 0.0
-ppcentral_offset = 0.0
-ppcentral = 0.0
-ptheta_lab = 0.0
-ppartmass = 0.139
-
-; "Hodoscope" parameters
-; Not used, but to keep THcTestPaddles happy
-pref_offset = 0
-pref_nsperchan = 0.1
\ No newline at end of file
diff --git a/PARAM/SHMS/GEN/shmsflags.param b/PARAM/SHMS/GEN/shmsflags.param
index 56ef41f56f18c84b9ac9aefaf73bbe94dd0fd773..78493f50f8a76526fa49297624a7cd979a86abdc 100644
--- a/PARAM/SHMS/GEN/shmsflags.param
+++ b/PARAM/SHMS/GEN/shmsflags.param
@@ -1,6 +1,6 @@
 
-; The hdelta_offset,htheta_offset,hphi_offset effect the
-; reconstructed target quantities. Used in h_targ_trans.f 
+; The pdelta_offset,ptheta_offset,pphi_offset effect the
+; reconstructed target quantities. 
 ; For transport x is in the dispersive direction with + down
 ;               y is in the horizontal + towards small angles.
 ;               z is along the central optics axis.
@@ -8,7 +8,7 @@
 ;    but for unknown reasons the yp offset is named  htheta_offset
 ;    and  the xp offset is named  hphi_offset
 ; Do not to change these values, since these are the zero order
-;  CMOP matrix elements. If you do change then your hms sieve
+;  CMOP matrix elements. If you do change then your shms sieve
 ;  plots will be screwed up.
 
 pdelta_offset = 0.0
@@ -16,13 +16,11 @@ ptheta_offset = 0.0
 pphi_offset = 0.0
 
 ; The following offsets are applied to the central kinematic variables
-;  in h_apply_offsets.f  . These might be modified by an experiment
+; These might be modified by an experiment
 ;  after doing calibration with elastic ep.
 
 pthetacentral_offset = 0.0
 p_oopcentral_offset = 0.0
 ppcentral_offset = 0.0
-ppcentral = 0.0
-ptheta_lab = 0.0
 
 
diff --git a/PARAM/SHMS/HODO/phodo.param b/PARAM/SHMS/HODO/phodo.param
index 000a889943e69413d0fd40bec546714097b60657..0d0e6ea71c4f1857576d4cfae3b9d0ff444fee35 100644
--- a/PARAM/SHMS/HODO/phodo.param
+++ b/PARAM/SHMS/HODO/phodo.param
@@ -1,3 +1,4 @@
+pcosmicflag=1
 ; for now manually set hte FADC mode
 ;  1 == Use the pulse int - pulse ped
 ;  2 == Use the sample integral - known ped
@@ -7,7 +8,7 @@ phodo_adc_mode=1
 ; 
 ; hhodo_tdc_offset is array of time offsets for all paddles in a plane
 ;   to move the tdc to between 0 and 4000 channels.
-  phodo_tdc_offset = 1300, 1300, 1300, 1300
+  phodo_tdc_offset = 1450, 1550, 1550, 1550
 ; pstart_time_center  center of allowed time window                             
    pstart_time_center = 32.                                                     
 ; hstart_time_slop    1/2 width of time window