; The pdelta_offset,ptheta_offset,pphi_offset effect the
; reconstructed target quantities. 
; For transport x is in the dispersive direction with + down
;               y is in the horizontal + towards small angles.
;               z is along the central optics axis.
; In transport coordinates phi = hyptar = dy/dz and theta = hxptar = dx/dz 
;    but for unknown reasons the yp offset is named  htheta_offset
;    and  the xp offset is named  hphi_offset
; Do not to change these values, since these are the zero order
;  CMOP matrix elements. If you do change then your shms sieve
;  plots will be screwed up.

pdelta_offset = 0.0
ptheta_offset = 0.0
pphi_offset = 4.83E-4

; The following offsets are applied to the central kinematic variables
; These might be modified by an experiment
;  after doing calibration with elastic ep.

pthetacentral_offset = 0.0
p_oopcentral_offset = 0.0
ppcentral_offset = 0.0