//==========================================================================
// AIDA Detector description implementation
//--------------------------------------------------------------------------
// Copyright (C) Organisation europeenne pour la Recherche nucleaire (CERN)
// All rights reserved.
//
// For the licensing terms see $DD4hepINSTALL/LICENSE.
// For the list of contributors see $DD4hepINSTALL/doc/CREDITS.
//
// Author : M.Frank
//
//==========================================================================
//
// Specialized generic detector constructor
//
//==========================================================================
#include "DD4hep/DetFactoryHelper.h"
#include "XML/Layering.h"
using namespace std;
using namespace dd4hep;
using namespace dd4hep::detail;
static Ref_t create_detector(Detector& description, xml_h e, SensitiveDetector sens) {
static double tolerance = 0e0;
Layering layering (e);
xml_det_t x_det = e;
Material air = description.air();
int det_id = x_det.id();
string det_name = x_det.nameStr();
xml_comp_t x_staves = x_det.staves();
xml_comp_t x_dim = x_det.dimensions();
int nsides = x_dim.numsides();
double inner_r = x_dim.rmin();
double dphi = (2*M_PI/nsides);
double hphi = dphi/2;
double support_thickness = 0.0;
if(x_staves.hasChild("support")){
support_thickness = getAttrOrDefault(x_staves.child(_U(support)), _U(thickness), 5.0 * cm);
}
double mod_z = layering.totalThickness() + support_thickness;
double outer_r = inner_r + mod_z;
double totThick = mod_z;
double offset = x_det.attr<double>(_Unicode(offset));
DetElement sdet (det_name,det_id);
Volume motherVol = description.pickMotherVolume(sdet);
PolyhedraRegular hedra (nsides,inner_r,inner_r+totThick+tolerance*2e0,x_dim.z());
Volume envelope (det_name,hedra,air);
PlacedVolume env_phv = motherVol.placeVolume(envelope,Transform3D(Translation3D(0,0,offset)*RotationZ(M_PI/nsides)));
env_phv.addPhysVolID("system",det_id);
env_phv.addPhysVolID("barrel",0);
sdet.setPlacement(env_phv);
DetElement stave_det("stave0",det_id);
double dx = 0.0; //mod_z / std::sin(dphi); // dx per layer
// Compute the top and bottom face measurements.
double trd_x2 = (2 * std::tan(hphi) * outer_r - dx)/2 - tolerance;
double trd_x1 = (2 * std::tan(hphi) * inner_r + dx)/2 - tolerance;
double trd_y1 = x_dim.z()/2 - tolerance;
double trd_y2 = trd_y1;
double trd_z = mod_z/2 - tolerance;
// Create the trapezoid for the stave.
Trapezoid trd(trd_x1, // Outer side, i.e. the "short" X side.
trd_x2, // Inner side, i.e. the "long" X side.
trd_y1, // Corresponds to subdetector (or module) Z.
trd_y2, //
trd_z); // Thickness, in Y for top stave, when rotated.
Volume mod_vol("stave",trd,air);
double l_pos_z = -(layering.totalThickness() / 2) - support_thickness/2.0;
//double trd_x2_support = trd_x1;
double trd_x1_support = (2 * std::tan(hphi) * outer_r - dx- support_thickness)/2 - tolerance;
Solid support_frame_s;
// optional stave support
if(x_staves.hasChild("support")){
xml_comp_t x_support = x_staves.child(_U(support));
// is the support on the inside surface?
bool is_inside_support = getAttrOrDefault<bool>(x_support, _Unicode(inside), true);
// number of "beams" running the length of the stave.
int n_beams = getAttrOrDefault<int>(x_support, _Unicode(n_beams), 3);
double beam_thickness = support_thickness / 4.0; // maybe a parameter later...
trd_x1_support = (2 * std::tan(hphi) * (outer_r - support_thickness + beam_thickness)) / 2 - tolerance;
double grid_size = getAttrOrDefault(x_support, _Unicode(grid_size), 25.0 * cm);
double beam_width = 2.0 * trd_x1_support / (n_beams + 1); // quick hack to make some gap between T beams
double cross_beam_thickness = support_thickness/4.0;
//double trd_x1_support = (2 * std::tan(hphi) * (inner_r + beam_thickness)) / 2 - tolerance;
double trd_x2_support = trd_x2;
int n_cross_supports = std::floor((trd_y1-cross_beam_thickness)/grid_size);
Box beam_vert_s(beam_thickness / 2.0 - tolerance, trd_y1, support_thickness / 2.0 - tolerance);
Box beam_hori_s(beam_width / 2.0 - tolerance, trd_y1, beam_thickness / 2.0 - tolerance);
UnionSolid T_beam_s(beam_vert_s, beam_hori_s, Position(0, 0, -support_thickness / 2.0 + beam_thickness / 2.0));
// cross supports
Trapezoid trd_support(trd_x1_support,trd_x2_support,
beam_thickness / 2.0 - tolerance, beam_thickness / 2.0 - tolerance,
support_thickness / 2.0 - tolerance - cross_beam_thickness/2.0);
UnionSolid support_array_start_s(T_beam_s,trd_support,Position(0,0,cross_beam_thickness/2.0));
for (int isup = 0; isup < n_cross_supports; isup++) {
support_array_start_s = UnionSolid(support_array_start_s, trd_support, Position(0, -1.0 * isup * grid_size, cross_beam_thickness/2.0));
support_array_start_s = UnionSolid(support_array_start_s, trd_support, Position(0, 1.0 * isup * grid_size, cross_beam_thickness/2.0));
}
support_array_start_s =
UnionSolid(support_array_start_s, beam_hori_s,
Position(-1.8 * 0.5*(trd_x1+trd_x2_support) / n_beams, 0, -support_thickness / 2.0 + beam_thickness / 2.0));
support_array_start_s =
UnionSolid(support_array_start_s, beam_hori_s,
Position(1.8 * 0.5*(trd_x1+trd_x2_support) / n_beams, 0, -support_thickness / 2.0 + beam_thickness / 2.0));
support_array_start_s =
UnionSolid(support_array_start_s, beam_vert_s, Position(-1.8 * 0.5*(trd_x1+trd_x2_support) / n_beams, 0, 0));
support_array_start_s =
UnionSolid(support_array_start_s, beam_vert_s, Position(1.8 * 0.5*(trd_x1+trd_x2_support) / n_beams, 0, 0));
support_frame_s = support_array_start_s;
Material support_mat = description.material(x_support.materialStr());
Volume support_vol("support_frame_v", support_frame_s, support_mat);
support_vol.setVisAttributes(description,x_support.visStr());
// figure out how to best place
//auto pv = mod_vol.placeVolume(support_vol, Position(0.0, 0.0, l_pos_z + support_thickness / 2.0));
auto pv = mod_vol.placeVolume(support_vol, Position(0.0, 0.0, -l_pos_z - support_thickness / 2.0));
}
//l_pos_z += support_thickness;
sens.setType("calorimeter");
{ // ===== buildBarrelStave(description, sens, module_volume) =====
// Parameters for computing the layer X dimension:
double stave_z = trd_y1;
double tan_hphi = std::tan(hphi);
double l_dim_x = trd_x1; // Starting X dimension for the layer.
// Loop over the sets of layer elements in the detector.
int l_num = 1;
for(xml_coll_t li(x_det,_U(layer)); li; ++li) {
xml_comp_t x_layer = li;
int repeat = x_layer.repeat();
// Loop over number of repeats for this layer.
for (int j=0; j<repeat; j++) {
string l_name = _toString(l_num,"layer%d");
double l_thickness = layering.layer(l_num-1)->thickness(); // Layer's thickness.
Position l_pos(0,0,l_pos_z+l_thickness/2); // Position of the layer.
Box l_box(l_dim_x-tolerance,stave_z-tolerance,l_thickness / 2-tolerance);
Volume l_vol(l_name,l_box,air);
DetElement layer(stave_det, l_name, det_id);
// Loop over the sublayers or slices for this layer.
int s_num = 1;
double s_pos_z = -(l_thickness / 2);
for(xml_coll_t si(x_layer,_U(slice)); si; ++si) {
xml_comp_t x_slice = si;
string s_name = _toString(s_num,"slice%d");
double s_thick = x_slice.thickness();
Box s_box(l_dim_x-tolerance,stave_z-tolerance,s_thick / 2-tolerance);
Volume s_vol(s_name,s_box,description.material(x_slice.materialStr()));
DetElement slice(layer,s_name,det_id);
if ( x_slice.isSensitive() ) {
s_vol.setSensitiveDetector(sens);
}
slice.setAttributes(description,s_vol,x_slice.regionStr(),x_slice.limitsStr(),x_slice.visStr());
// Slice placement.
PlacedVolume slice_phv = l_vol.placeVolume(s_vol,Position(0,0,s_pos_z+s_thick/2));
slice_phv.addPhysVolID("slice", s_num);
slice.setPlacement(slice_phv);
// Increment Z position of slice.
s_pos_z += s_thick;
// Increment slice number.
++s_num;
}
// Set region, limitset, and vis of layer.
layer.setAttributes(description,l_vol,x_layer.regionStr(),x_layer.limitsStr(),x_layer.visStr());
PlacedVolume layer_phv = mod_vol.placeVolume(l_vol,l_pos);
layer_phv.addPhysVolID("layer", l_num);
layer.setPlacement(layer_phv);
// Increment to next layer Z position.
double xcut = l_thickness * tan_hphi;
l_dim_x += xcut;
l_pos_z += l_thickness;
++l_num;
}
}
}
// Set stave visualization.
if ( x_staves ) {
mod_vol.setVisAttributes(description.visAttributes(x_staves.visStr()));
}
// Phi start for a stave.
double phi = M_PI / nsides;
double mod_x_off = dx / 2; // Stave X offset, derived from the dx.
double mod_y_off = inner_r + mod_z/2; // Stave Y offset
// Create nsides staves.
for (int i = 0; i < nsides; i++, phi -= dphi) { // i is module number
// Compute the stave position
double m_pos_x = mod_x_off * std::cos(phi) - mod_y_off * std::sin(phi);
double m_pos_y = mod_x_off * std::sin(phi) + mod_y_off * std::cos(phi);
Transform3D tr(RotationZYX(0,phi,M_PI*0.5),Translation3D(-m_pos_x,-m_pos_y,0));
PlacedVolume pv = envelope.placeVolume(mod_vol,tr);
pv.addPhysVolID("system",det_id);
pv.addPhysVolID("barrel",0);
pv.addPhysVolID("module",i+1);
DetElement sd = i==0 ? stave_det : stave_det.clone(_toString(i,"stave%d"));
sd.setPlacement(pv);
sdet.add(sd);
}
// Set envelope volume attributes.
envelope.setAttributes(description,x_det.regionStr(),x_det.limitsStr(),x_det.visStr());
return sdet;
}
DECLARE_DETELEMENT(athena_EcalBarrel,create_detector)
DECLARE_DETELEMENT(athena_HcalBarrel,create_detector)