Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • EIC/detectors/athena
  • zwzhao/athena
  • FernandoTA/athena
  • palspeic/athena
4 results
Show changes
Hide whitespace changes
Inline Side-by-side
Showing
with 764 additions and 950 deletions
compact/solenoid.xml
View file @ 1008a184
......@@ -11,11 +11,11 @@
<constant name="SolenoidBarrelInnerSecondMLILayerThickness" value=" 20.0 * mm"/>
<constant name="SolenoidBarrelInnerThermalShieldThickness" value=" 10.0 * mm"/>
<constant name="SolenoidBarrelInnerFirstMLILayerThickness" value=" 15.0 * mm"/>
<constant name="SolenoidBarrelInnerHeliumVesselThickness" value=" 20.0 * mm"/>
<constant name="SolenoidBarrelInnerHeliumVesselThickness" value=" 15.0 * mm"/>
<constant name="SolenoidBarrelInnerHeliumThickness" value=" 10.0 * mm"/>
<constant name="SolenoidBarrelCoilFormerThickness" value=" 50.0 * mm"/>
<constant name="SolenoidBarrelCoilThickness" value="200.0 * mm"/>
<constant name="SolenoidBarrelCoilOverbindThickness" value="200.0 * mm"/>
<constant name="SolenoidBarrelCoilFormerThickness" value=" 10.0 * mm"/>
<constant name="SolenoidBarrelCoilThickness" value="210.0 * mm"/>
<constant name="SolenoidBarrelCoilOverbindThickness" value=" 50.0 * mm"/>
<constant name="SolenoidBarrelOuterHeliumThickness" value=" 15.0 * mm"/>
<constant name="SolenoidBarrelOuterHeliumVesselThickness" value=" 10.0 * mm"/>
<constant name="SolenoidBarrelOuterFirstMLILayerThickness" value=" 15.0 * mm"/>
......@@ -130,7 +130,7 @@
inner_r="SolenoidBarrelInnerSecondMLILayer_rmin"
outer_z="SolenoidBarrelInnerSecondMLILayer_zmax"
vis="SolenoidCryostatVis">
<slice material="Vacuum" thickness="SolenoidBarrelInnerSecondMLILayerThickness"/>
<slice material="MylarMLI" thickness="SolenoidBarrelInnerSecondMLILayerThickness"/>
</layer>
<layer id="3"
inner_r="SolenoidBarrelInnerThermalShield_rmin"
......@@ -142,7 +142,7 @@
inner_r="SolenoidBarrelInnerFirstMLILayer_rmin"
outer_z="SolenoidBarrelInnerFirstMLILayer_zmax"
vis="SolenoidCryostatVis">
<slice material="Vacuum" thickness="SolenoidBarrelInnerFirstMLILayerThickness"/>
<slice material="MylarMLI" thickness="SolenoidBarrelInnerFirstMLILayerThickness"/>
</layer>
<layer id="5"
inner_r="SolenoidBarrelInnerHeliumVessel_rmin"
......@@ -174,7 +174,7 @@
inner_r="SolenoidBarrelCoilOverbind_rmin"
outer_z="SolenoidBarrelCoilOverbind_zmax"
vis="SolenoidCryostatVis">
<slice material="Steel235" thickness="SolenoidBarrelCoilOverbindThickness"/>
<slice material="Aluminum" thickness="SolenoidBarrelCoilOverbindThickness"/>
</layer>
<layer id="10"
......@@ -194,7 +194,7 @@
inner_r="SolenoidBarrelOuterFirstMLILayer_rmin"
outer_z="SolenoidBarrelOuterFirstMLILayer_zmax"
vis="SolenoidCryostatVis">
<slice material="Vacuum" thickness="SolenoidBarrelOuterFirstMLILayerThickness"/>
<slice material="MylarMLI" thickness="SolenoidBarrelOuterFirstMLILayerThickness"/>
</layer>
<layer id="13"
inner_r="SolenoidBarrelOuterThermalShield_rmin"
......@@ -206,7 +206,7 @@
inner_r="SolenoidBarrelOuterSecondMLILayer_rmin"
outer_z="SolenoidBarrelOuterSecondMLILayer_zmax"
vis="SolenoidCryostatVis">
<slice material="Vacuum" thickness="SolenoidBarrelOuterSecondMLILayerThickness"/>
<slice material="MylarMLI" thickness="SolenoidBarrelOuterSecondMLILayerThickness"/>
</layer>
<layer id="15"
inner_r="SolenoidBarrelOuterVacuumVessel_rmin"
......@@ -228,7 +228,7 @@
inner_z="SolenoidEndcapCoilEndSupport_zmin"
inner_r="SolenoidEndcapCoilEndSupport_rmin"
outer_r="SolenoidEndcapCoilEndSupport_rmax">
<slice material="Steel235" thickness="SolenoidEndcapCoilEndSupportThickness"/>
<slice material="Aluminum" thickness="SolenoidEndcapCoilEndSupportThickness"/>
</layer>
<layer id="2"
inner_z="SolenoidEndcapHelium_zmin"
......@@ -246,7 +246,7 @@
inner_z="SolenoidEndcapFirstMLILayer_zmin"
inner_r="SolenoidEndcapFirstMLILayer_rmin"
outer_r="SolenoidEndcapFirstMLILayer_rmax">
<slice material="Vacuum" thickness="SolenoidEndcapFirstMLILayerThickness"/>
<slice material="MylarMLI" thickness="SolenoidEndcapFirstMLILayerThickness"/>
</layer>
<layer id="5"
inner_z="SolenoidEndcapThermalShield_zmin"
......@@ -258,7 +258,7 @@
inner_z="SolenoidEndcapSecondMLILayer_zmin"
inner_r="SolenoidEndcapSecondMLILayer_rmin"
outer_r="SolenoidEndcapSecondMLILayer_rmax">
<slice material="Vacuum" thickness="SolenoidEndcapSecondMLILayerThickness"/>
<slice material="MylarMLI" thickness="SolenoidEndcapSecondMLILayerThickness"/>
</layer>
<layer id="7"
inner_z="SolenoidEndcapVacuumVessel_zmin"
......@@ -280,7 +280,7 @@
inner_z="SolenoidEndcapCoilEndSupport_zmin"
inner_r="SolenoidEndcapCoilEndSupport_rmin"
outer_r="SolenoidEndcapCoilEndSupport_rmax">
<slice material="Steel235" thickness="SolenoidEndcapCoilEndSupportThickness"/>
<slice material="Aluminum" thickness="SolenoidEndcapCoilEndSupportThickness"/>
</layer>
<layer id="2"
inner_z="SolenoidEndcapHelium_zmin"
......@@ -298,7 +298,7 @@
inner_z="SolenoidEndcapFirstMLILayer_zmin"
inner_r="SolenoidEndcapFirstMLILayer_rmin"
outer_r="SolenoidEndcapFirstMLILayer_rmax">
<slice material="Vacuum" thickness="SolenoidEndcapFirstMLILayerThickness"/>
<slice material="MylarMLI" thickness="SolenoidEndcapFirstMLILayerThickness"/>
</layer>
<layer id="5"
inner_z="SolenoidEndcapThermalShield_zmin"
......@@ -310,7 +310,7 @@
inner_z="SolenoidEndcapSecondMLILayer_zmin"
inner_r="SolenoidEndcapSecondMLILayer_rmin"
outer_r="SolenoidEndcapSecondMLILayer_rmax">
<slice material="Vacuum" thickness="SolenoidEndcapSecondMLILayerThickness"/>
<slice material="MylarMLI" thickness="SolenoidEndcapSecondMLILayerThickness"/>
</layer>
<layer id="7"
inner_z="SolenoidEndcapVacuumVessel_zmin"
......@@ -327,12 +327,12 @@
zmin="-SolenoidBarrelCoil_zmax" zmax="SolenoidBarrelCoil_zmax"
inner_radius="SolenoidalFieldRadius" outer_radius="SolenoidalFieldRadius+20*cm"/-->
<field type="FieldMapBrBz" name="GlobalSolenoid" field_type="magnetic"
field_map="fieldmaps/EIC_Magnetic_Field_Map_2021_05_07_radial_coords__cm___T_.120000.lines.Bmap"
url="https://eicweb.phy.anl.gov/EIC/detectors/athena/uploads/9179a98c5a80df1f2b98968c747c1c48/EIC_Magnetic_Field_Map_2021_05_07_radial_coords__cm___T_.120000.lines.Bmap"
field_map="fieldmaps/EIC_v.2.0.3_Magnetic_Field_Map_2021_09_28_radial_coords_cm_T.Bmap.txt"
url="https://eicweb.phy.anl.gov/EIC/detectors/athena/uploads/fd64db33e1c99547ab1840d8847fd1c1/EIC_v.2.0.3_Magnetic_Field_Map_2021_09_28_radial_coords_cm_T.Bmap.txt"
scale="-1.0">
<dimensions>
<transverse step="2.0*cm" rmin="0*cm" rmax="398*cm" />
<longitudinal step="2.0*cm" zmin="-600*cm" zmax="598*cm" />
<transverse step="2.0*cm" rmin="0*cm" rmax="998*cm" />
<longitudinal step="2.0*cm" zmin="-800*cm" zmax="798*cm" />
<translation x="0.0*cm" y="0.0*cm" z="0.0*cm" />
<rotation x="0" y="0" z="0" />
</dimensions>
......
compact/subsystem_views/calorimeters.xml
View file @ 1008a184
......@@ -33,7 +33,8 @@
The ip6 (or other ip) defines should be included first.
These files have only a define tags.
</documentation>
<include ref="ip6/ip6_defs.xml" />
<include ref="ip6/definitions.xml" />
<include ref="ip6/far_forward/fields_275.xml" />
<include ref="compact/definitions.xml" />
</define>
......@@ -58,9 +59,7 @@
<display>
<include ref="compact/colors.xml" />
<!--include ref="compact/colors2.xml"/-->
<include ref="compact/display.xml" />
<!--include ref="compact/display_detailed.xml"/-->
<include ref="compact/display_detailed.xml" />
</display>
<documentation level="0">
......@@ -87,7 +86,7 @@
Beamline elements
-----------------
</comment>
<include ref="ip6/beampipe.xml" />
<include ref="ip6/central_beampipe.xml" />
<documentation level="5">
## Main magnet
......@@ -96,125 +95,12 @@
</documentation>
<include ref="compact/solenoid.xml"/>
<documentation level="5">
### Tracker subassemblies for ACTS
</documentation>
<detectors>
<detector id="VertexBarrelSubAssembly_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexBarrel" />
</detector>
<detector id="VertexEndcapSubAssembly_ID"
name="VertexEndcapSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexEndcapN" />
<composite name="VertexEndcapP" />
</detector>
<detector id="TrackerBarrelSubAssembly_Inner_ID"
name="TrackerBarrelSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Inner"/>
</detector>
<detector id="TrackerEndcapSubAssembly_Inner_ID"
name="TrackerEndcapSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerEndcapN_Inner"/>
<composite name="TrackerEndcapP_Inner"/>
</detector>
<detector id="TrackerBarrelSubAssembly_Outer_ID"
name="TrackerSubAssembly_Outer"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Outer"/>
<composite name="TrackerEndcapP_Outer"/>
<composite name="TrackerEndcapN_Outer"/>
</detector>
</detectors>
<documentation level="10">
## Central calorimetry
</documentation>
<include ref="compact/ecal.xml"/>
<include ref="compact/hcal.xml"/>
<fields>
<field name="B0PF_Magnet" type="MultipoleMagnet">
<position x="B0PF_XPosition" y="0" z="B0PF_CenterPosition"/>
<rotation x="0" y="B0PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0PF_InnerRadius" dz="B0PF_Length*0.5"/>
<coefficient coefficient="B0PF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="B0APF_Magnet" type="MultipoleMagnet">
<position x="B0APF_XPosition" y="0" z="B0APF_CenterPosition"/>
<rotation x="0" y="B0APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0APF_InnerRadius" dz="B0APF_Length*0.5"/>
<coefficient coefficient="B0APF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="Q1APF_Magnet" type="MultipoleMagnet">
<position x="Q1APF_XPosition" y="0" z="Q1APF_CenterPosition"/>
<rotation x="0" y="Q1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1APF_InnerRadius" dz="Q1APF_Length*0.5"/>
<coefficient coefficient="Q1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q1BPF_Magnet" type="MultipoleMagnet">
<position x="Q1BPF_XPosition" y="0" z="Q1BPF_CenterPosition"/>
<rotation x="0" y="Q1BPF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1BPF_InnerRadius" dz="Q1BPF_Length*0.5"/>
<coefficient coefficient="Q1BPF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1BPF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q2PF_Magnet" type="MultipoleMagnet">
<position x="Q2PF_XPosition" y="0" z="Q2PF_CenterPosition"/>
<rotation x="0" y="Q2PF_RotationAngle" z="pi/2.0"/>
<shape type="Tube" rmin="0.0" rmax="Q2PF_InnerRadius" dz="Q2PF_Length*0.5"/>
<coefficient coefficient="Q2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1PF_Magnet" type="MultipoleMagnet">
<position x="B1PF_XPosition" y="0" z="B1PF_CenterPosition"/>
<rotation x="0" y="B1PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1PF_InnerRadius" dz="B1PF_Length*0.5"/>
<coefficient coefficient="B1PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1APF_Magnet" type="MultipoleMagnet">
<position x="B1APF_XPosition" y="0" z="B1APF_CenterPosition"/>
<rotation x="0" y="B1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1APF_InnerRadius" dz="B1APF_Length*0.5"/>
<coefficient coefficient="B1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B2PF_Magnet" type="MultipoleMagnet">
<position x="B2PF_XPosition" y="0" z="B2PF_CenterPosition"/>
<rotation x="0" y="B2PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B2PF_InnerRadius" dz="B2PF_Length*0.5"/>
<coefficient coefficient="B2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
</fields>
<comment>
FB elements
-----------
None (TODO)
What is FB?
</comment>
<readouts>
</readouts>
......
compact/subsystem_views/dirc_only.xml
View file @ 1008a184
......@@ -33,7 +33,8 @@
The ip6 (or other ip) defines should be included first.
These files have only a define tags.
</documentation>
<include ref="ip6/ip6_defs.xml" />
<include ref="ip6/definitions.xml" />
<include ref="ip6/far_forward/fields_275.xml" />
<include ref="compact/definitions.xml" />
</define>
......@@ -58,7 +59,7 @@
<display>
<include ref="compact/colors.xml" />
<include ref="compact/display.xml" />
<include ref="compact/display_detailed.xml" />
</display>
<documentation level="0">
......
compact/subsystem_views/drich_only.xml
View file @ 1008a184
......@@ -33,7 +33,8 @@
The ip6 (or other ip) defines should be included first.
These files have only a define tags.
</documentation>
<include ref="ip6/ip6_defs.xml" />
<include ref="ip6/definitions.xml" />
<include ref="ip6/far_forward/fields_275.xml" />
<include ref="compact/definitions.xml" />
</define>
......@@ -58,104 +59,15 @@
<display>
<include ref="compact/colors.xml" />
<!--include ref="compact/colors2.xml"/-->
<include ref="compact/display.xml" />
<!--include ref="compact/display_detailed.xml"/-->
<include ref="compact/display_detailed.xml" />
</display>
<documentation level="0">
## Detector Subsystems
### IP Subsystems
The interaction point subsystems are included before the central detector subsystems.
This is becuase the IP subsystems, for exmaple the beampipe, will define paramters
which are subsquently used in the central detector construction -- e.g. the vertex tracker
uses the beampipe OD to help define its placement.
The IP subsystems include the Far forward and backward regions. The list of subsystem includes:
- Interaction region beampipe
- B0 tracker
- Off-momentum tracker
- Far forward roman pots
- Zero Degree Calorimeter
- Beam line magnets.
- and more...
</documentation>
<documentation level="10">
### dRICh only
## dRICh only
</documentation>
<include ref="compact/drich.xml" />
<fields>
<field name="B0PF_Magnet" type="MultipoleMagnet">
<position x="B0PF_XPosition" y="0" z="B0PF_CenterPosition"/>
<rotation x="0" y="B0PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0PF_InnerRadius" dz="B0PF_Length*0.5"/>
<coefficient coefficient="B0PF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="B0APF_Magnet" type="MultipoleMagnet">
<position x="B0APF_XPosition" y="0" z="B0APF_CenterPosition"/>
<rotation x="0" y="B0APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0APF_InnerRadius" dz="B0APF_Length*0.5"/>
<coefficient coefficient="B0APF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="Q1APF_Magnet" type="MultipoleMagnet">
<position x="Q1APF_XPosition" y="0" z="Q1APF_CenterPosition"/>
<rotation x="0" y="Q1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1APF_InnerRadius" dz="Q1APF_Length*0.5"/>
<coefficient coefficient="Q1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q1BPF_Magnet" type="MultipoleMagnet">
<position x="Q1BPF_XPosition" y="0" z="Q1BPF_CenterPosition"/>
<rotation x="0" y="Q1BPF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1BPF_InnerRadius" dz="Q1BPF_Length*0.5"/>
<coefficient coefficient="Q1BPF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1BPF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q2PF_Magnet" type="MultipoleMagnet">
<position x="Q2PF_XPosition" y="0" z="Q2PF_CenterPosition"/>
<rotation x="0" y="Q2PF_RotationAngle" z="pi/2.0"/>
<shape type="Tube" rmin="0.0" rmax="Q2PF_InnerRadius" dz="Q2PF_Length*0.5"/>
<coefficient coefficient="Q2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1PF_Magnet" type="MultipoleMagnet">
<position x="B1PF_XPosition" y="0" z="B1PF_CenterPosition"/>
<rotation x="0" y="B1PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1PF_InnerRadius" dz="B1PF_Length*0.5"/>
<coefficient coefficient="B1PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1APF_Magnet" type="MultipoleMagnet">
<position x="B1APF_XPosition" y="0" z="B1APF_CenterPosition"/>
<rotation x="0" y="B1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1APF_InnerRadius" dz="B1APF_Length*0.5"/>
<coefficient coefficient="B1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B2PF_Magnet" type="MultipoleMagnet">
<position x="B2PF_XPosition" y="0" z="B2PF_CenterPosition"/>
<rotation x="0" y="B2PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B2PF_InnerRadius" dz="B2PF_Length*0.5"/>
<coefficient coefficient="B2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
</fields>
<comment>
FB elements
-----------
None (TODO)
What is FB?
</comment>
<readouts>
</readouts>
<include ref="ip6/central_beampipe.xml" />
<include ref="compact/drich.xml" />
</lccdd>
compact/subsystem_views/inner_detector.xml
View file @ 1008a184
......@@ -33,7 +33,8 @@
The ip6 (or other ip) defines should be included first.
These files have only a define tags.
</documentation>
<include ref="ip6/ip6_defs.xml" />
<include ref="ip6/definitions.xml" />
<include ref="ip6/far_forward/fields_275.xml" />
<include ref="compact/definitions.xml" />
</define>
......@@ -59,8 +60,7 @@
<display>
<include ref="compact/colors.xml" />
<!--include ref="compact/colors2.xml"/-->
<include ref="compact/display.xml" />
<!--include ref="compact/display_detailed.xml"/-->
<include ref="compact/display.xml"/>
</display>
<documentation level="0">
......@@ -87,7 +87,7 @@
Beamline elements
-----------------
</comment>
<include ref="ip6/beampipe.xml" />
<include ref="ip6/central_beampipe.xml" />
<documentation level="5">
## Main magnet
......@@ -95,156 +95,15 @@
Note: When changing magnet, also select dimensions in definitions.xml.
</documentation>
<documentation level="5">
### Tracker subassemblies for ACTS
</documentation>
<detectors>
<detector id="VertexBarrelSubAssembly_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexBarrel" />
</detector>
<detector id="VertexEndcapSubAssembly_ID"
name="VertexEndcapSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexEndcapN" />
<composite name="VertexEndcapP" />
</detector>
<detector id="TrackerBarrelSubAssembly_Inner_ID"
name="TrackerBarrelSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Inner"/>
</detector>
<detector id="TrackerEndcapSubAssembly_Inner_ID"
name="TrackerEndcapSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerEndcapN_Inner"/>
<composite name="TrackerEndcapP_Inner"/>
</detector>
<detector id="TrackerBarrelSubAssembly_Outer_ID"
name="TrackerSubAssembly_Outer"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Outer"/>
<composite name="TrackerEndcapP_Outer"/>
<composite name="TrackerEndcapN_Outer"/>
</detector>
<comment>
TOF disabled for baseline
<detector id="OuterTrackingSubAssembly_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TOFSubAssemblyVis">
<composite name="BarrelTOF"/>
<composite name="ForwardTOF"/>
<composite name="BackwardTOF"/>
</detector>
</comment>
<detector id="OuterTrackingSubAssembly_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="SubAssemblyVis">
<composite name="GEMTrackerEndcapP"/>
<composite name="GEMTrackerEndcapN"/>
</detector>
</detectors>
<documentation level="10">
## Central tracking detectors
</documentation>
<include ref="compact/tracking_config_acadia.xml"/>
<!--include ref="compact/tracking_config_mgpds.xml"/-->
<include ref="compact/tracking_config_deathvalley.xml"/>
<documentation level="10">
### PID detectors
</documentation>
<include ref="compact/pid_config_acadia.xml"/>
<documentation level="10">
## Central calorimetry
</documentation>
<documentation level="11">
## Far foward detectors
</documentation>
<fields>
<field name="B0PF_Magnet" type="MultipoleMagnet">
<position x="B0PF_XPosition" y="0" z="B0PF_CenterPosition"/>
<rotation x="0" y="B0PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0PF_InnerRadius" dz="B0PF_Length*0.5"/>
<coefficient coefficient="B0PF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="B0APF_Magnet" type="MultipoleMagnet">
<position x="B0APF_XPosition" y="0" z="B0APF_CenterPosition"/>
<rotation x="0" y="B0APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0APF_InnerRadius" dz="B0APF_Length*0.5"/>
<coefficient coefficient="B0APF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="Q1APF_Magnet" type="MultipoleMagnet">
<position x="Q1APF_XPosition" y="0" z="Q1APF_CenterPosition"/>
<rotation x="0" y="Q1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1APF_InnerRadius" dz="Q1APF_Length*0.5"/>
<coefficient coefficient="Q1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q1BPF_Magnet" type="MultipoleMagnet">
<position x="Q1BPF_XPosition" y="0" z="Q1BPF_CenterPosition"/>
<rotation x="0" y="Q1BPF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1BPF_InnerRadius" dz="Q1BPF_Length*0.5"/>
<coefficient coefficient="Q1BPF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1BPF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q2PF_Magnet" type="MultipoleMagnet">
<position x="Q2PF_XPosition" y="0" z="Q2PF_CenterPosition"/>
<rotation x="0" y="Q2PF_RotationAngle" z="pi/2.0"/>
<shape type="Tube" rmin="0.0" rmax="Q2PF_InnerRadius" dz="Q2PF_Length*0.5"/>
<coefficient coefficient="Q2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1PF_Magnet" type="MultipoleMagnet">
<position x="B1PF_XPosition" y="0" z="B1PF_CenterPosition"/>
<rotation x="0" y="B1PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1PF_InnerRadius" dz="B1PF_Length*0.5"/>
<coefficient coefficient="B1PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1APF_Magnet" type="MultipoleMagnet">
<position x="B1APF_XPosition" y="0" z="B1APF_CenterPosition"/>
<rotation x="0" y="B1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1APF_InnerRadius" dz="B1APF_Length*0.5"/>
<coefficient coefficient="B1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B2PF_Magnet" type="MultipoleMagnet">
<position x="B2PF_XPosition" y="0" z="B2PF_CenterPosition"/>
<rotation x="0" y="B2PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B2PF_InnerRadius" dz="B2PF_Length*0.5"/>
<coefficient coefficient="B2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
</fields>
<comment>
FB elements
-----------
None (TODO)
What is FB?
</comment>
<include ref="compact/pid_config_deathvalley.xml"/>
<readouts>
</readouts>
......
compact/subsystem_views/inner_tracking_only.xml → compact/subsystem_views/ip6.xml
View file @ 1008a184
......@@ -4,7 +4,7 @@
<debug>
<type name="surface" value="0"/>
<type name="material" value="0"/>
<type name="material" value="0"/>
<type name="readout" value="0"/>
<type name="segmentation" value="0"/>
<type name="limits" value="0"/>
......@@ -21,9 +21,9 @@
<!-- Some information about detector -->
<info name="Athena Detector" title="Athena Detector"
author="Athena Collaboration"
url="https://eicweb.phy.anl.gov/EIC/detectors/athena.git"
status="development"
version="v1 2021-03-16">
url="https://eicweb.phy.anl.gov/EIC/detectors/athena.git"
status="development"
version="v1 2021-03-16">
<comment> Athena </comment>
</info>
<define>
......@@ -33,7 +33,8 @@
The ip6 (or other ip) defines should be included first.
These files have only a define tags.
</documentation>
<include ref="ip6/ip6_defs.xml" />
<include ref="ip6/definitions.xml" />
<include ref="ip6/far_forward/fields_275.xml" />
<include ref="compact/definitions.xml" />
</define>
......@@ -58,7 +59,9 @@
<display>
<include ref="compact/colors.xml" />
<!--include ref="compact/colors2.xml"/-->
<include ref="compact/display.xml" />
<!--include ref="compact/display_detailed.xml"/-->
</display>
<documentation level="0">
......@@ -81,161 +84,19 @@
- and more...
</documentation>
<comment>
Beamline elements
-----------------
</comment>
<comment>
Main magnet
-----------
Note: When changing magnet, also select dimensions in definitions.xml.
</comment>
<!--include ref="compact/solenoid.xml"/-->
<comment>
Tracker subassemblies for ACTS
------------------------------
</comment>
<detectors>
<detector id="VertexBarrelSubAssembly_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexBarrel" />
</detector>
<detector id="VertexEndcapSubAssembly_ID"
name="VertexEndcapSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexEndcapN" />
<composite name="VertexEndcapP" />
</detector>
<detector id="TrackerBarrelSubAssembly_Inner_ID"
name="TrackerBarrelSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Inner"/>
</detector>
<detector id="TrackerEndcapSubAssembly_Inner_ID"
name="TrackerEndcapSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerEndcapN_Inner"/>
<composite name="TrackerEndcapP_Inner"/>
</detector>
<detector id="TrackerBarrelSubAssembly_Outer_ID"
name="TrackerSubAssembly_Outer"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Outer"/>
<composite name="TrackerEndcapP_Outer"/>
<composite name="TrackerEndcapN_Outer"/>
</detector>
<comment>
TOF disabled for baseline
<detector id="OuterTrackingSubAssembly_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TOFSubAssemblyVis">
<composite name="BarrelTOF"/>
<composite name="ForwardTOF"/>
<composite name="BackwardTOF"/>
</detector>
</comment>
<detector id="OuterTrackingSubAssembly_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="SubAssemblyVis">
<composite name="GEMTrackerEndcapP"/>
<composite name="GEMTrackerEndcapN"/>
</detector>
</detectors>
<comment>
Central tracking detectors
--------------------------
</comment>
<include ref="compact/vertex_tracker.xml"/>
<include ref="compact/central_tracker.xml"/>
<comment>
PID detectors
-------------
</comment>
<fields>
<field name="B0PF_Magnet" type="MultipoleMagnet">
<position x="B0PF_XPosition" y="0" z="B0PF_CenterPosition"/>
<rotation x="0" y="B0PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0PF_InnerRadius" dz="B0PF_Length*0.5"/>
<coefficient coefficient="B0PF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="B0APF_Magnet" type="MultipoleMagnet">
<position x="B0APF_XPosition" y="0" z="B0APF_CenterPosition"/>
<rotation x="0" y="B0APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0APF_InnerRadius" dz="B0APF_Length*0.5"/>
<coefficient coefficient="B0APF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="Q1APF_Magnet" type="MultipoleMagnet">
<position x="Q1APF_XPosition" y="0" z="Q1APF_CenterPosition"/>
<rotation x="0" y="Q1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1APF_InnerRadius" dz="Q1APF_Length*0.5"/>
<coefficient coefficient="Q1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q1BPF_Magnet" type="MultipoleMagnet">
<position x="Q1BPF_XPosition" y="0" z="Q1BPF_CenterPosition"/>
<rotation x="0" y="Q1BPF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1BPF_InnerRadius" dz="Q1BPF_Length*0.5"/>
<coefficient coefficient="Q1BPF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1BPF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q2PF_Magnet" type="MultipoleMagnet">
<position x="Q2PF_XPosition" y="0" z="Q2PF_CenterPosition"/>
<rotation x="0" y="Q2PF_RotationAngle" z="pi/2.0"/>
<shape type="Tube" rmin="0.0" rmax="Q2PF_InnerRadius" dz="Q2PF_Length*0.5"/>
<coefficient coefficient="Q2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1PF_Magnet" type="MultipoleMagnet">
<position x="B1PF_XPosition" y="0" z="B1PF_CenterPosition"/>
<rotation x="0" y="B1PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1PF_InnerRadius" dz="B1PF_Length*0.5"/>
<coefficient coefficient="B1PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1APF_Magnet" type="MultipoleMagnet">
<position x="B1APF_XPosition" y="0" z="B1APF_CenterPosition"/>
<rotation x="0" y="B1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1APF_InnerRadius" dz="B1APF_Length*0.5"/>
<coefficient coefficient="B1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B2PF_Magnet" type="MultipoleMagnet">
<position x="B2PF_XPosition" y="0" z="B2PF_CenterPosition"/>
<rotation x="0" y="B2PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B2PF_InnerRadius" dz="B2PF_Length*0.5"/>
<coefficient coefficient="B2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
</fields>
<documentation level="11">
## Far foward detectors
</documentation>
<include ref="ip6/central_beampipe.xml"/>
<comment>
FB elements
-----------
None (TODO)
</comment>
<documentation level="11">
## Far foward detectors
</documentation>
<include ref="ip6/far_forward.xml"/>
<readouts>
</readouts>
<documentation level="11">
## Far backward detectors
</documentation>
<include ref="ip6/far_backward.xml"/>
</lccdd>
compact/subsystem_views/pfrich_only.xml 0 → 100644
View file @ 1008a184
<lccdd xmlns:compact="http://www.lcsim.org/schemas/compact/1.0"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xs:noNamespaceSchemaLocation="http://www.lcsim.org/schemas/compact/1.0/compact.xsd">
<debug>
<type name="surface" value="0"/>
<type name="material" value="0"/>
<type name="readout" value="0"/>
<type name="segmentation" value="0"/>
<type name="limits" value="0"/>
<type name="region" value="0"/>
<type name="includes" value="0"/>
</debug>
<documentation level="-1">
# Athena Detector
- https://eicweb.phy.anl.gov/EIC/detectors/athena.git
- https://eicweb.phy.anl.gov/EIC/detectors/ip6.git
</documentation>
<!-- Some information about detector -->
<info name="Athena Detector" title="Athena Detector"
author="Athena Collaboration"
url="https://eicweb.phy.anl.gov/EIC/detectors/athena.git"
status="development"
version="v1 2021-03-16">
<comment> Athena </comment>
</info>
<define>
<documentation level="2">
## Main Constant Definitions
The ip6 (or other ip) defines should be included first.
These files have only a define tags.
</documentation>
<include ref="ip6/definitions.xml" />
<include ref="ip6/far_forward/fields_275.xml" />
<include ref="compact/definitions.xml" />
</define>
<includes>
<gdmlFile ref="compact/elements.xml"/>
<gdmlFile ref="compact/materials.xml"/>
<file ref="compact/optical_materials.xml"/>
</includes>
<limits>
<limitset name="EICBeamlineLimits">
<limit name="step_length_max" particles="*" value="1.0" unit="mm" />
<limit name="track_length_max" particles="*" value="1.0" unit="mm" />
<limit name="time_max" particles="*" value="0.1" unit="ns" />
<limit name="ekin_min" particles="*" value="0.001" unit="MeV" />
<limit name="range_min" particles="*" value="0.1" unit="mm" />
</limitset>
<limitset name="cal_limits">
<limit name="step_length_max" particles="*" value="5.0" unit="mm"/>
</limitset>
</limits>
<display>
<include ref="compact/colors.xml" />
<include ref="compact/display_detailed.xml" />
</display>
<documentation level="10">
## pfRICH only
</documentation>
<include ref="ip6/central_beampipe.xml" />
<include ref="compact/pfrich.xml" />
</lccdd>
compact/subsystem_views/pid_only.xml
View file @ 1008a184
......@@ -33,7 +33,8 @@
The ip6 (or other ip) defines should be included first.
These files have only a define tags.
</documentation>
<include ref="ip6/ip6_defs.xml" />
<include ref="ip6/definitions.xml" />
<include ref="ip6/far_forward/fields_275.xml" />
<include ref="compact/definitions.xml" />
</define>
......@@ -58,7 +59,7 @@
<display>
<include ref="compact/colors.xml" />
<include ref="compact/display.xml" />
<include ref="compact/display_detailed.xml" />
</display>
<documentation level="0">
......@@ -85,156 +86,13 @@
Beamline elements
-----------------
</comment>
<comment>
Main magnet
-----------
Note: When changing magnet, also select dimensions in definitions.xml.
</comment>
<comment>
Tracker subassemblies for ACTS
------------------------------
</comment>
<detectors>
<detector id="VertexBarrelSubAssembly_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexBarrel" />
</detector>
<detector id="VertexEndcapSubAssembly_ID"
name="VertexEndcapSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexEndcapN" />
<composite name="VertexEndcapP" />
</detector>
<detector id="TrackerBarrelSubAssembly_Inner_ID"
name="TrackerBarrelSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Inner"/>
</detector>
<detector id="TrackerEndcapSubAssembly_Inner_ID"
name="TrackerEndcapSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerEndcapN_Inner"/>
<composite name="TrackerEndcapP_Inner"/>
</detector>
<detector id="TrackerBarrelSubAssembly_Outer_ID"
name="TrackerSubAssembly_Outer"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Outer"/>
<composite name="TrackerEndcapP_Outer"/>
<composite name="TrackerEndcapN_Outer"/>
</detector>
<comment>
TOF disabled for baseline
<detector id="OuterTrackingSubAssembly_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TOFSubAssemblyVis">
<composite name="BarrelTOF"/>
<composite name="ForwardTOF"/>
<composite name="BackwardTOF"/>
</detector>
</comment>
<detector id="OuterTrackingSubAssembly_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="SubAssemblyVis">
<composite name="GEMTrackerEndcapP"/>
<composite name="GEMTrackerEndcapN"/>
</detector>
</detectors>
<documentation level="10">
## Central tracking detectors
</documentation>
<include ref="ip6/central_beampipe.xml" />
<comment>
PID detectors
-------------
</comment>
<include ref="compact/pid_config_acadia.xml"/>
<comment>
FF elements
-----------
</comment>
<fields>
<field name="B0PF_Magnet" type="MultipoleMagnet">
<position x="B0PF_XPosition" y="0" z="B0PF_CenterPosition"/>
<rotation x="0" y="B0PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0PF_InnerRadius" dz="B0PF_Length*0.5"/>
<coefficient coefficient="B0PF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="B0APF_Magnet" type="MultipoleMagnet">
<position x="B0APF_XPosition" y="0" z="B0APF_CenterPosition"/>
<rotation x="0" y="B0APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0APF_InnerRadius" dz="B0APF_Length*0.5"/>
<coefficient coefficient="B0APF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="Q1APF_Magnet" type="MultipoleMagnet">
<position x="Q1APF_XPosition" y="0" z="Q1APF_CenterPosition"/>
<rotation x="0" y="Q1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1APF_InnerRadius" dz="Q1APF_Length*0.5"/>
<coefficient coefficient="Q1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q1BPF_Magnet" type="MultipoleMagnet">
<position x="Q1BPF_XPosition" y="0" z="Q1BPF_CenterPosition"/>
<rotation x="0" y="Q1BPF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1BPF_InnerRadius" dz="Q1BPF_Length*0.5"/>
<coefficient coefficient="Q1BPF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1BPF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q2PF_Magnet" type="MultipoleMagnet">
<position x="Q2PF_XPosition" y="0" z="Q2PF_CenterPosition"/>
<rotation x="0" y="Q2PF_RotationAngle" z="pi/2.0"/>
<shape type="Tube" rmin="0.0" rmax="Q2PF_InnerRadius" dz="Q2PF_Length*0.5"/>
<coefficient coefficient="Q2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1PF_Magnet" type="MultipoleMagnet">
<position x="B1PF_XPosition" y="0" z="B1PF_CenterPosition"/>
<rotation x="0" y="B1PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1PF_InnerRadius" dz="B1PF_Length*0.5"/>
<coefficient coefficient="B1PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1APF_Magnet" type="MultipoleMagnet">
<position x="B1APF_XPosition" y="0" z="B1APF_CenterPosition"/>
<rotation x="0" y="B1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1APF_InnerRadius" dz="B1APF_Length*0.5"/>
<coefficient coefficient="B1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B2PF_Magnet" type="MultipoleMagnet">
<position x="B2PF_XPosition" y="0" z="B2PF_CenterPosition"/>
<rotation x="0" y="B2PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B2PF_InnerRadius" dz="B2PF_Length*0.5"/>
<coefficient coefficient="B2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
</fields>
<comment>
FB elements
-----------
None (TODO)
</comment>
<include ref="compact/pid_config_deathvalley.xml"/>
<readouts>
</readouts>
......
compact/subsystem_views/tof_only.xml 0 → 100644
View file @ 1008a184
<lccdd xmlns:compact="http://www.lcsim.org/schemas/compact/1.0"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xs:noNamespaceSchemaLocation="http://www.lcsim.org/schemas/compact/1.0/compact.xsd">
<debug>
<type name="surface" value="0"/>
<type name="material" value="0"/>
<type name="readout" value="0"/>
<type name="segmentation" value="0"/>
<type name="limits" value="0"/>
<type name="region" value="0"/>
<type name="includes" value="0"/>
</debug>
<documentation level="-1">
# Athena Detector
- https://eicweb.phy.anl.gov/EIC/detectors/athena.git
- https://eicweb.phy.anl.gov/EIC/detectors/ip6.git
</documentation>
<!-- Some information about detector -->
<info name="Athena Detector" title="Athena Detector"
author="Athena Collaboration"
url="https://eicweb.phy.anl.gov/EIC/detectors/athena.git"
status="development"
version="v1 2021-03-16">
<comment> Athena </comment>
</info>
<define>
<documentation level="2">
## Main Constant Definitions
The ip6 (or other ip) defines should be included first.
These files have only a define tags.
</documentation>
<include ref="ip6/definitions.xml" />
<include ref="ip6/far_forward/fields_275.xml" />
<include ref="compact/definitions.xml" />
</define>
<includes>
<gdmlFile ref="compact/elements.xml"/>
<gdmlFile ref="compact/materials.xml"/>
<file ref="compact/optical_materials.xml"/>
</includes>
<limits>
<limitset name="EICBeamlineLimits">
<limit name="step_length_max" particles="*" value="1.0" unit="mm" />
<limit name="track_length_max" particles="*" value="1.0" unit="mm" />
<limit name="time_max" particles="*" value="0.1" unit="ns" />
<limit name="ekin_min" particles="*" value="0.001" unit="MeV" />
<limit name="range_min" particles="*" value="0.1" unit="mm" />
</limitset>
<limitset name="cal_limits">
<limit name="step_length_max" particles="*" value="5.0" unit="mm"/>
</limitset>
</limits>
<display>
<include ref="compact/colors.xml" />
<include ref="compact/display_detailed.xml" />
</display>
<documentation level="10">
## TOF only
</documentation>
<include ref="ip6/central_beampipe.xml" />
<include ref="compact/tof_barrel.xml" />
</lccdd>
compact/subsystem_views/tracking_only.xml
View file @ 1008a184
......@@ -33,7 +33,8 @@
The ip6 (or other ip) defines should be included first.
These files have only a define tags.
</documentation>
<include ref="ip6/ip6_defs.xml" />
<include ref="ip6/definitions.xml" />
<include ref="ip6/far_forward/fields_275.xml" />
<include ref="compact/definitions.xml" />
</define>
......@@ -58,7 +59,7 @@
<display>
<include ref="compact/colors.xml" />
<include ref="compact/display.xml" />
<include ref="compact/display_detailed.xml" />
</display>
<documentation level="0">
......@@ -85,154 +86,20 @@
Beamline elements
-----------------
</comment>
<comment>
Main magnet
-----------
Note: When changing magnet, also select dimensions in definitions.xml.
</comment>
<!--include ref="compact/solenoid.xml"/-->
<comment>
Tracker subassemblies for ACTS
------------------------------
</comment>
<detectors>
<detector id="VertexBarrelSubAssembly_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexBarrel" />
</detector>
<detector id="VertexEndcapSubAssembly_ID"
name="VertexEndcapSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexEndcapN" />
<composite name="VertexEndcapP" />
</detector>
<detector id="TrackerBarrelSubAssembly_Inner_ID"
name="TrackerBarrelSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Inner"/>
</detector>
<detector id="TrackerEndcapSubAssembly_Inner_ID"
name="TrackerEndcapSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerEndcapN_Inner"/>
<composite name="TrackerEndcapP_Inner"/>
</detector>
<detector id="TrackerBarrelSubAssembly_Outer_ID"
name="TrackerSubAssembly_Outer"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Outer"/>
<composite name="TrackerEndcapP_Outer"/>
<composite name="TrackerEndcapN_Outer"/>
</detector>
<comment>
TOF disabled for baseline
<detector id="OuterTrackingSubAssembly_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TOFSubAssemblyVis">
<composite name="BarrelTOF"/>
<composite name="ForwardTOF"/>
<composite name="BackwardTOF"/>
</detector>
</comment>
<detector id="OuterTrackingSubAssembly_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="SubAssemblyVis">
<composite name="GEMTrackerEndcapP"/>
<composite name="GEMTrackerEndcapN"/>
</detector>
</detectors>
<include ref="ip6/central_beampipe.xml" />
<comment>
Central tracking detectors
--------------------------
</comment>
<include ref="compact/tracking_config_acadia.xml"/>
<!--include ref="compact/tracking_config_canyonlands.xml"/-->
<include ref="compact/tracking_config_deathvalley.xml"/>
<comment>
PID detectors
-------------
</comment>
<fields>
<field name="B0PF_Magnet" type="MultipoleMagnet">
<position x="B0PF_XPosition" y="0" z="B0PF_CenterPosition"/>
<rotation x="0" y="B0PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0PF_InnerRadius" dz="B0PF_Length*0.5"/>
<coefficient coefficient="B0PF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="B0APF_Magnet" type="MultipoleMagnet">
<position x="B0APF_XPosition" y="0" z="B0APF_CenterPosition"/>
<rotation x="0" y="B0APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0APF_InnerRadius" dz="B0APF_Length*0.5"/>
<coefficient coefficient="B0APF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="Q1APF_Magnet" type="MultipoleMagnet">
<position x="Q1APF_XPosition" y="0" z="Q1APF_CenterPosition"/>
<rotation x="0" y="Q1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1APF_InnerRadius" dz="Q1APF_Length*0.5"/>
<coefficient coefficient="Q1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q1BPF_Magnet" type="MultipoleMagnet">
<position x="Q1BPF_XPosition" y="0" z="Q1BPF_CenterPosition"/>
<rotation x="0" y="Q1BPF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1BPF_InnerRadius" dz="Q1BPF_Length*0.5"/>
<coefficient coefficient="Q1BPF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1BPF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q2PF_Magnet" type="MultipoleMagnet">
<position x="Q2PF_XPosition" y="0" z="Q2PF_CenterPosition"/>
<rotation x="0" y="Q2PF_RotationAngle" z="pi/2.0"/>
<shape type="Tube" rmin="0.0" rmax="Q2PF_InnerRadius" dz="Q2PF_Length*0.5"/>
<coefficient coefficient="Q2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1PF_Magnet" type="MultipoleMagnet">
<position x="B1PF_XPosition" y="0" z="B1PF_CenterPosition"/>
<rotation x="0" y="B1PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1PF_InnerRadius" dz="B1PF_Length*0.5"/>
<coefficient coefficient="B1PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1APF_Magnet" type="MultipoleMagnet">
<position x="B1APF_XPosition" y="0" z="B1APF_CenterPosition"/>
<rotation x="0" y="B1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1APF_InnerRadius" dz="B1APF_Length*0.5"/>
<coefficient coefficient="B1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B2PF_Magnet" type="MultipoleMagnet">
<position x="B2PF_XPosition" y="0" z="B2PF_CenterPosition"/>
<rotation x="0" y="B2PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B2PF_InnerRadius" dz="B2PF_Length*0.5"/>
<coefficient coefficient="B2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
</fields>
<comment>
FB elements
-----------
None (TODO)
</comment>
<include ref="compact/tof_barrel.xml"/>
<readouts>
</readouts>
......
compact/subsystem_views/vertex_only.xml
View file @ 1008a184
......@@ -33,7 +33,8 @@
The ip6 (or other ip) defines should be included first.
These files have only a define tags.
</documentation>
<include ref="ip6/ip6_defs.xml" />
<include ref="ip6/definitions.xml" />
<include ref="ip6/far_forward/fields_275.xml" />
<include ref="compact/definitions.xml" />
</define>
......@@ -58,7 +59,7 @@
<display>
<include ref="compact/colors.xml" />
<include ref="compact/display.xml" />
<include ref="compact/display_detailed.xml" />
</display>
<documentation level="0">
......@@ -81,158 +82,11 @@
- and more...
</documentation>
<comment>
Beamline elements
-----------------
</comment>
<comment>
Main magnet
-----------
Note: When changing magnet, also select dimensions in definitions.xml.
</comment>
<!--include ref="compact/solenoid.xml"/-->
<comment>
Tracker subassemblies for ACTS
------------------------------
</comment>
<detectors>
<detector id="VertexBarrelSubAssembly_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexBarrel" />
</detector>
<detector id="VertexEndcapSubAssembly_ID"
name="VertexEndcapSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexEndcapN" />
<composite name="VertexEndcapP" />
</detector>
<detector id="TrackerBarrelSubAssembly_Inner_ID"
name="TrackerBarrelSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Inner"/>
</detector>
<detector id="TrackerEndcapSubAssembly_Inner_ID"
name="TrackerEndcapSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerEndcapN_Inner"/>
<composite name="TrackerEndcapP_Inner"/>
</detector>
<detector id="TrackerBarrelSubAssembly_Outer_ID"
name="TrackerSubAssembly_Outer"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Outer"/>
<composite name="TrackerEndcapP_Outer"/>
<composite name="TrackerEndcapN_Outer"/>
</detector>
<comment>
TOF disabled for baseline
<detector id="OuterTrackingSubAssembly_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TOFSubAssemblyVis">
<composite name="BarrelTOF"/>
<composite name="ForwardTOF"/>
<composite name="BackwardTOF"/>
</detector>
</comment>
<detector id="OuterTrackingSubAssembly_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="SubAssemblyVis">
<composite name="GEMTrackerEndcapP"/>
<composite name="GEMTrackerEndcapN"/>
</detector>
</detectors>
<comment>
Central tracking detectors
--------------------------
</comment>
<include ref="compact/vertex_tracker.xml"/>
<comment>
PID detectors
-------------
</comment>
<fields>
<field name="B0PF_Magnet" type="MultipoleMagnet">
<position x="B0PF_XPosition" y="0" z="B0PF_CenterPosition"/>
<rotation x="0" y="B0PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0PF_InnerRadius" dz="B0PF_Length*0.5"/>
<coefficient coefficient="B0PF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="B0APF_Magnet" type="MultipoleMagnet">
<position x="B0APF_XPosition" y="0" z="B0APF_CenterPosition"/>
<rotation x="0" y="B0APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B0APF_InnerRadius" dz="B0APF_Length*0.5"/>
<coefficient coefficient="B0APF_Bmax" skew="0.0*tesla"/>
<!--<coefficient coefficient="2.0*tesla/cm" skew="0.2*tesla/cm"/> -->
</field>
<field name="Q1APF_Magnet" type="MultipoleMagnet">
<position x="Q1APF_XPosition" y="0" z="Q1APF_CenterPosition"/>
<rotation x="0" y="Q1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1APF_InnerRadius" dz="Q1APF_Length*0.5"/>
<coefficient coefficient="Q1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q1BPF_Magnet" type="MultipoleMagnet">
<position x="Q1BPF_XPosition" y="0" z="Q1BPF_CenterPosition"/>
<rotation x="0" y="Q1BPF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="Q1BPF_InnerRadius" dz="Q1BPF_Length*0.5"/>
<coefficient coefficient="Q1BPF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q1BPF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="Q2PF_Magnet" type="MultipoleMagnet">
<position x="Q2PF_XPosition" y="0" z="Q2PF_CenterPosition"/>
<rotation x="0" y="Q2PF_RotationAngle" z="pi/2.0"/>
<shape type="Tube" rmin="0.0" rmax="Q2PF_InnerRadius" dz="Q2PF_Length*0.5"/>
<coefficient coefficient="Q2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="Q2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1PF_Magnet" type="MultipoleMagnet">
<position x="B1PF_XPosition" y="0" z="B1PF_CenterPosition"/>
<rotation x="0" y="B1PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1PF_InnerRadius" dz="B1PF_Length*0.5"/>
<coefficient coefficient="B1PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B1APF_Magnet" type="MultipoleMagnet">
<position x="B1APF_XPosition" y="0" z="B1APF_CenterPosition"/>
<rotation x="0" y="B1APF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B1APF_InnerRadius" dz="B1APF_Length*0.5"/>
<coefficient coefficient="B1APF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B1APF_GradientMax" skew="0.0*tesla/cm"/>
</field>
<field name="B2PF_Magnet" type="MultipoleMagnet">
<position x="B2PF_XPosition" y="0" z="B2PF_CenterPosition"/>
<rotation x="0" y="B2PF_RotationAngle" z="0"/>
<shape type="Tube" rmin="0.0" rmax="B2PF_InnerRadius" dz="B2PF_Length*0.5"/>
<coefficient coefficient="B2PF_Bmax" skew="0.0*tesla"/>
<coefficient coefficient="B2PF_GradientMax" skew="0.0*tesla/cm"/>
</field>
</fields>
<comment>
FB elements
-----------
None (TODO)
</comment>
<include ref="compact/vertex_tracker_3layers.xml"/>
<readouts>
</readouts>
......
compact/tof.xml
View file @ 1008a184
......@@ -12,8 +12,10 @@
</documentation>
<!--include ref="tof_endcap.xml"/-->
<include ref="tof_barrel.xml"/>
<include ref="tof_endcap.xml"/>
<include ref="tof_forward.xml"/>
<include ref="tof_backward.xml"/>
</lccdd>
compact/tof_barrel.xml
View file @ 1008a184
......@@ -2,28 +2,60 @@
<lccdd>
<define>
<constant name="BarrelTOFSpaceFrame_width" value="40.0*mm"/>
<constant name="BarrelTOFSpaceFrame_height" value="sqrt(3.0)*32.0*mm/2.0"/>
<constant name="BarrelTOFSensor_thickness" value="0.3*mm"/>
<constant name="BarrelTOFModule_thickness" value="2.00/100*9.37*cm"/>
<constant name="BarrelTOFService_thickness" value="BarrelTOFModule_thickness-BarrelTOFSensor_thickness"/>
<comment>
Layer_rOffset is used to add inside space so the _rmin value is the nominal sensor radius.
--------------------------
Barrel TOF Parameters
--------------------------
</comment>
<constant name="BarrelTOFLayer_rOffset" value="0.5*cm"/>
<constant name="BarrelTOF_Sensor_thickness" value="0.3*mm"/>
<constant name="BarrelTOF_Hybrid_thickness" value="2*0.008125*cm"/>
<constant name="BarrelTOF_CFSkin_thickness" value="2*0.0075*cm"/>
<constant name="BarrelTOF_CFoam_thickness" value="2*0.29*cm"/>
<constant name="BarrelTOF_CHoneycomb_thickness" value="2*0.29*cm"/>
<constant name="BarrelTOF_CoolingTube_thickness" value="0.08*cm"/>
<constant name="BarrelTOF_Coolant_thickness" value="0.08*cm"/>
<constant name="BarrelTOF_Module_thickness" value="BarrelTOF_Sensor_thickness+2*BarrelTOF_Hybrid_thickness+2*BarrelTOF_CFSkin_thickness+BarrelTOF_CFoam_thickness+BarrelTOF_CoolingTube_thickness+BarrelTOF_Coolant_thickness"/>
<constant name="BarrelTOF_rmin1" value="50.0*cm"/>
<constant name="BarrelTOF_rmin2" value="BarrelTOF_rmin1 + BarrelTOFSpaceFrame_width"/>
<constant name="BarrelTOF_length1" value="192.0*cm"/>
<constant name="BarrelTOF_length2" value="200.0*cm"/>
<constant name="BarrelTOF_radius_design" value="50.0*cm"/>
<constant name="BarrelTOF_Module_width_design" value="56.0*mm"/>
<constant name="BarrelTOF_Sensor_width_design" value="32.0*mm"/>
<constant name="BarrelTOF_CFoam_width_design" value="BarrelTOF_Sensor_width_design-5.0*mm"/>
<constant name="BarrelTOF_CHoneycomb_width_design" value="BarrelTOF_Module_width_design-BarrelTOF_CFoam_width_design"/>
<constant name="BarrelTOF_CoolingTube_width_design" value="0.75*cm"/>
<constant name="BarrelTOF_Coolant_width_design" value="0.75*cm"/>
<constant name="BarrelTOF_thickness" value="BarrelTOF_rmin2 - BarrelTOF_rmin1"/>
<constant name="BarrelTOF_length" value="BarrelTOF_length2"/>
<constant name="BarrelTOF_Sensor_position_design" value="0.5*(BarrelTOF_Sensor_width_design-BarrelTOF_Module_width_design)"/>
<constant name="BarrelTOF_CFoam_position_design" value="0.5*(BarrelTOF_CFoam_width_design-BarrelTOF_Module_width_design)"/>
<constant name="BarrelTOF_CHoneycomb_position_design" value="0.5*(BarrelTOF_Module_width_design-BarrelTOF_CHoneycomb_width_design)"/>
<constant name="BarrelTOF_CoolingTube_position_design" value="BarrelTOF_CHoneycomb_position_design"/>
<constant name="BarrelTOF_Coolant_position_design" value="BarrelTOF_CHoneycomb_position_design"/>
<constant name="BarrelTOF_Service_position_design" value="0.0*mm"/>
<comment> TODO: These should be computed </comment>
<constant name="BarrelTOF_NModules" value="80"/>
<constant name="BarrelTOF_scale" value="1.05"/>
<constant name="BarrelTOF_radius" value="BarrelTOF_scale * BarrelTOF_radius_design"/>
<constant name="BarrelTOF_Sensor_width" value="BarrelTOF_scale * BarrelTOF_Sensor_width_design"/>
<constant name="BarrelTOF_CFoam_width" value="BarrelTOF_scale * BarrelTOF_CFoam_width_design"/>
<constant name="BarrelTOF_CHoneycomb_width" value="BarrelTOF_scale * BarrelTOF_CHoneycomb_width_design"/>
<constant name="BarrelTOF_CoolingTube_width" value="BarrelTOF_scale * BarrelTOF_CoolingTube_width_design"/>
<constant name="BarrelTOF_Coolant_width" value="BarrelTOF_scale * BarrelTOF_Coolant_width_design"/>
<constant name="BarrelTOF_Sensor_position" value="BarrelTOF_scale * BarrelTOF_Sensor_position_design"/>
<constant name="BarrelTOF_CFoam_position" value="BarrelTOF_scale * BarrelTOF_CFoam_position_design"/>
<constant name="BarrelTOF_CHoneycomb_position" value="BarrelTOF_scale * BarrelTOF_CHoneycomb_position_design"/>
<constant name="BarrelTOF_CoolingTube_position" value="BarrelTOF_scale * BarrelTOF_CoolingTube_position_design"/>
<constant name="BarrelTOF_Coolant_position" value="BarrelTOF_scale * BarrelTOF_Coolant_position_design"/>
<constant name="BarrelTOF_Service_position" value="BarrelTOF_scale * BarrelTOF_Service_position_design"/>
<constant name="BarrelTOF_Module_width" value="BarrelTOF_scale*BarrelTOF_Module_width_design"/>
<constant name="BarrelTOF_Module_tiltangle" value="18.0*degree"/>
<constant name="BarrelTOF_Module_nphi" value="108"/>
<constant name="BarrelTOF_Module_nz" value="1"/>
<constant name="BarrelTOF_rmin" value="BarrelTOF_radius"/>
<constant name="BarrelTOF_rmax" value="BarrelTOF_rmin+BarrelTOF_Module_width*tan(BarrelTOF_Module_tiltangle)"/>
<constant name="BarrelTOF_thickness" value="BarrelTOF_rmax-BarrelTOF_rmin"/>
<constant name="BarrelTOF_rOffset" value="16.0*mm"/>
<constant name="BarrelTOF_length1" value="2 * BarrelTOF_rmin / CentralTrackingBarrel_tan * 0.995"/>
<constant name="BarrelTOF_length2" value="2 * BarrelTOF_rmax / CentralTrackingBarrel_tan * 0.995"/>
<constant name="BarrelTOF_length" value="BarrelTOF_length2"/>
</define>
......@@ -34,46 +66,61 @@
<detector
id="BarrelTOF_ID"
name="BarrelTOF"
type="athena_TrackerBarrel"
readout="BarrelTOFHits"
type="athena_TOFBarrel"
readout="TOFBarrelHits"
insideTrackingVolume="true">
<dimensions
rmin="BarrelTOF_rmin1-BarrelTOFLayer_rOffset"
rmax="BarrelTOF_rmin2-BarrelTOFLayer_rOffset + BarrelTOF_thickness"
rmin="BarrelTOF_rmin-BarrelTOF_rOffset"
rmax="BarrelTOF_rmax+BarrelTOF_rOffset"
length="BarrelTOF_length"/>
<comment>
Tracker Barrel Modules
</comment>
<module name="BarrelTOF_Module1" vis="TOFVis">
<frame material="CarbonFiber_25percent" vis="TOFVis"
width="BarrelTOFSpaceFrame_width"
height="BarrelTOFSpaceFrame_height"
length="BarrelTOF_length1"
thickness="0.1*mm" />
<module_component name="silicon" material="Silicon" sensitive="true"
width="BarrelTOFSpaceFrame_width" length="BarrelTOF_length1-0.1*mm" thickness="BarrelTOFSensor_thickness" >
<module name="BarrelTOF_Module1" vis="TOFBarrelModuleVis">
<module_component name="sensor" material="Silicon" sensitive="true" width="BarrelTOF_Sensor_width" length="BarrelTOF_length1" thickness="BarrelTOF_Sensor_thickness" vis="TOFSensorVis" >
<position x="BarrelTOF_Sensor_position" y="0" z="0" />
</module_component>
<module_component name="hybridtop" material="Kapton" sensitive="false" width="BarrelTOF_Module_width" length="BarrelTOF_length1" thickness="BarrelTOF_Hybrid_thickness" vis="TOFHybridVis" >
<position x="BarrelTOF_Service_position" y="0" z="0" />
</module_component>
<module_component name="cfskintop" material="CFRPMix2" sensitive="false" width="BarrelTOF_Module_width" length="BarrelTOF_length1" thickness="BarrelTOF_CFSkin_thickness" vis="TOFCSkinVis" >
<position x="BarrelTOF_Service_position" y="0" z="0" />
</module_component>
<module_component name="coolingtube" material="Aluminum" sensitive="false" width="BarrelTOF_CoolingTube_width" length="BarrelTOF_length1" thickness="BarrelTOF_CoolingTube_thickness" vis="TOFCoolingTubeVis" >
<position x="BarrelTOF_CoolingTube_position" y="0" z="0" />
</module_component>
<module_component name="coolant" material="NOVEC7200" sensitive="false" width="BarrelTOF_Coolant_width" length="BarrelTOF_length1" thickness="BarrelTOF_Coolant_thickness" vis="TOFCoolantVis" >
<position x="BarrelTOF_Coolant_position" y="0" z="0" />
</module_component>
<module_component name="cfoam" material="CarbonFoam" sensitive="false" width="BarrelTOF_CFoam_width" length="BarrelTOF_length1" thickness="BarrelTOF_CFoam_thickness" vis="TOFCFoamVis" >
<position x="BarrelTOF_CFoam_position" y="0" z="0" />
</module_component>
<module_component name="choneycomb" material="CFRPMix" sensitive="false" width="BarrelTOF_CHoneycomb_width" length="BarrelTOF_length1" thickness="BarrelTOF_CHoneycomb_thickness" vis="TOFCHoneycombVis" >
<position x="BarrelTOF_CHoneycomb_position" y="0" z="-1*BarrelTOF_CFoam_thickness" />
</module_component>
<module_component name="cfskinbottom" material="CFRPMix2" sensitive="false" width="BarrelTOF_Module_width" length="BarrelTOF_length1" thickness="BarrelTOF_CFSkin_thickness" vis="TOFCSkinVis" >
<position x="BarrelTOF_Service_position" y="0" z="0" />
</module_component>
<module_component name="hybridbottom" material="Kapton" sensitive="false" width="BarrelTOF_Module_width" length="BarrelTOF_length1" thickness="BarrelTOF_Hybrid_thickness" vis="TOFHybridVis" >
<position x="BarrelTOF_Service_position" y="0" z="0" />
</module_component>
<module_component name="service" material="Silicon" sensitive="false"
width="BarrelTOFSpaceFrame_width" length="BarrelTOF_length1-0.1*mm" thickness="BarrelTOFService_thickness" />
</module>
<layer module="BarrelTOF_Module1" id="1" vis="TOFVis">
<layer module="BarrelTOF_Module1" id="1" vis="TOFLayerVis">
<barrel_envelope
inner_r="BarrelTOF_rmin1-BarrelTOFLayer_rOffset"
outer_r="BarrelTOF_rmin1-BarrelTOFLayer_rOffset + BarrelTOF_thickness-1.0*mm"
inner_r="BarrelTOF_rmin-BarrelTOF_rOffset"
outer_r="BarrelTOF_rmax+BarrelTOF_rOffset"
z_length="BarrelTOF_length"/>
<rphi_layout phi_tilt="10.0*degree" nphi="BarrelTOF_NModules" phi0="0.0" rc="BarrelTOF_rmin1" dr="0.0 * mm"/>
<z_layout dr="0.0 * mm" z0="0.0 * mm" nz="1"/>
<rphi_layout phi_tilt="BarrelTOF_Module_tiltangle" nphi="BarrelTOF_Module_nphi" phi0="0.0" rc="BarrelTOF_rmin" dr="0.0*mm"/>
<z_layout dr="0.0*mm" z0="0.0*mm" nz="BarrelTOF_Module_nz"/>
</layer>
</detector>
</detectors>
<readouts>
<readout name="BarrelTOFHits">
<segmentation type="CartesianGridXY" grid_size_x="0.150*mm" grid_size_y="0.150*mm" />
<readout name="TOFBarrelHits">
<segmentation type="CartesianGridXY" grid_size_x="0.05*mm" grid_size_y="BarrelTOF_length1/48" />
<id>system:8,layer:4,module:12,sensor:2,x:32:-16,y:-16</id>
</readout>
</readouts>
</lccdd>
compact/tof_endcap.xml
View file @ 1008a184
......@@ -3,45 +3,65 @@
<define>
<comment>
--------------------------
Forward and backward TOF Parameters
Forward TOF Parameters
--------------------------
</comment>
<comment> Forward/backward TOF position </comment>
<constant name="ForwardTOF_length" value="min(ForwardTOFRegion_length, 2.*cm)"/>
<constant name="ForwardTOF_zmin" value="ForwardTOFRegion_zmin + ForwardTOFRegion_length - ForwardTOF_length - 1*cm"/>
<constant name="ForwardTOF_nlayers" value="2"/>
<constant name="ForwardTOFMod_offset" value="1.2*cm"/>
<constant name="BackwardTOF_length" value="min(BackwardTOFRegion_length, 2.*cm)"/>
<constant name="BackwardTOF_zmin" value="BackwardTOFRegion_zmin + 0.5*cm"/>
<constant name="BackwardTOF_nlayers" value="2"/>
<constant name="BackwardTOFMod_offset" value="1.2*cm"/>
<constant name="TOFEndcapSensor_thickness" value="0.3*mm"/>
<constant name="TOFEndcap_thickness" value="2.00/100*9.37*cm"/>
<constant name="TOFEndcapService_thickness" value="TOFEndcap_thickness-TOFEndcapSensor_thickness"/>
<constant name="TOFEndcap_nLayers" value="2"/>
<comment> LGAD parameters for the endcap TOFs </comment>
<constant name="TOFEndcapSensor_thickness" value="300*um" />
<constant name="TOFEndcapService_thickness" value="5.00/100*9.37*cm-TOFEndcapSensor_thickness" />
<constant name="TOFEndcapMod_count" value="36" />
<constant name="TOFEndcapMod_dz" value="0" />
<constant name="TOFEndcapMod_overlap" value="0" />
</define>
<documentation>
## Forward and backward TOF double-disks,
## a potential ATHENA upgrade
</documentation>
<comment>
Actual detector implementation.
</comment>
<define>
<constant name="TOFEndcapMod_thickness" value="TOFEndcapSensor_thickness + TOFEndcapService_thickness" />
<constant name="TOFEndcapMod_angle" value="360.0*degree / TOFEndcapMod_count * (1 + TOFEndcapMod_overlap)" />
<comment> 1 um padding to not have layer and module touch (ACTS requirement) </comment>
<constant name="TOFEndcapLayer_thickness" value="TOFEndcapMod_thickness + 2 * TOFEndcapMod_dz + 1 * um" />
<constant name="ForwardTOF_zmin" value="BarrelTracking_length/2.0 + ForwardTracking_length + ForwardRICH_length + ForwardTRD_length"/>
<constant name="ForwardTOF_dz" value="(ForwardTOF_length-0.4*cm)/TOFEndcap_nLayers"/>
<constant name="ForwardTOF_rmin1" value="ForwardPID_rmin1"/>
<constant name="ForwardTOF_rmin2" value="ForwardPID_rmin1"/>
<constant name="ForwardTOF_rmax1" value="Solenoid_rmin"/>
<constant name="ForwardTOF_rmax2" value="Solenoid_rmin"/>
<constant name="ForwardTOFModOpeningAngle" value="30.0*degree"/>
<constant name="ForwardTOFMod1_x1" value="2.0*ForwardTOF_rmin1*sin(ForwardTOFModOpeningAngle/2.0)"/>
<constant name="ForwardTOFMod1_x2" value="2.0*ForwardTOF_rmax1*sin(ForwardTOFModOpeningAngle/2.0)"/>
<constant name="ForwardTOFMod1_y" value="ForwardTOF_rmax1*cos(ForwardTOFModOpeningAngle/2.0) - ForwardTOF_rmin1"/>
<constant name="ForwardTOFMod2_x1" value="2.0*ForwardTOF_rmin2*sin(ForwardTOFModOpeningAngle/2.0)"/>
<constant name="ForwardTOFMod2_x2" value="2.0*ForwardTOF_rmax2*sin(ForwardTOFModOpeningAngle/2.0)"/>
<constant name="ForwardTOFMod2_y" value="ForwardTOF_rmax2*cos(ForwardTOFModOpeningAngle/2.0) - ForwardTOF_rmin2"/>
<constant name="ForwardTOFMod_rmin" value="ForwardTOFRegion_tan * ForwardTOF_zmin" />
<constant name="ForwardTOFMod_rmax" value="ForwardTOFRegion_rmax" />
<constant name="ForwardTOFMod_x1" value="2 * ForwardTOFMod_rmin * tan(TOFEndcapMod_angle/2)" />
<constant name="ForwardTOFMod_x2" value="2 * ForwardTOFMod_rmax * sin(TOFEndcapMod_angle/2)" />
<constant name="ForwardTOFMod_y" value="ForwardTOFMod_rmax * cos(TOFEndcapMod_angle/2) - ForwardTOFMod_rmin" />
<constant name="ForwardTOFMod1_zmin" value="ForwardTOF_zmin" />
<constant name="ForwardTOFMod2_zmin" value="ForwardTOF_zmin + ForwardTOFMod_offset" />
<constant name="ForwardTOFLayer_rmin" value="ForwardTOFMod_rmin - 1*um" />
<constant name="ForwardTOFLayer_rmax" value="ForwardTOFMod_rmax + 1*um" />
<constant name="ForwardTOFLayer1_zmin" value="ForwardTOFMod1_zmin - TOFEndcapLayer_thickness / 2" />
<constant name="ForwardTOFLayer2_zmin" value="ForwardTOFMod2_zmin - TOFEndcapLayer_thickness / 2" />
<constant name="BackwardTOF_zmin" value="BarrelTracking_length/2.0 + BackwardTracking_length + BackwardCherenkov_length "/>
<constant name="BackwardTOF_dz" value="(BackwardTOF_length-0.4*cm)/TOFEndcap_nLayers"/>
<constant name="BackwardTOF_thickness" value="BackwardTOF_dz - 1.0*mm"/>
<comment> Note, the -1.0*mm is so the layers do not touch surfaces.
This is a limitation of ACTS geometry which will likely go away in the future.</comment>
<constant name="BackwardTOF_rmin1" value="ForwardPID_rmin1"/>
<constant name="BackwardTOF_rmin2" value="ForwardPID_rmin1"/>
<constant name="BackwardTOF_rmax1" value="BarrelTracking_rmax"/>
<constant name="BackwardTOF_rmax2" value="BarrelTracking_rmax"/>
<constant name="BackwardTOFModOpeningAngle" value="30.0*degree"/>
<constant name="BackwardTOFMod1_x1" value="2.0*BackwardTOF_rmin1*sin(BackwardTOFModOpeningAngle/2.0)"/>
<constant name="BackwardTOFMod1_x2" value="2.0*BackwardTOF_rmax1*sin(BackwardTOFModOpeningAngle/2.0)"/>
<constant name="BackwardTOFMod1_y" value="BackwardTOF_rmax1*cos(BackwardTOFModOpeningAngle/2.0) - BackwardTOF_rmin1"/>
<constant name="BackwardTOFMod2_x1" value="2.0*BackwardTOF_rmin2*sin(BackwardTOFModOpeningAngle/2.0)"/>
<constant name="BackwardTOFMod2_x2" value="2.0*BackwardTOF_rmax2*sin(BackwardTOFModOpeningAngle/2.0)"/>
<constant name="BackwardTOFMod2_y" value="BackwardTOF_rmax2*cos(BackwardTOFModOpeningAngle/2.0) - BackwardTOF_rmin2"/>
<constant name="BackwardTOFMod_rmin" value="BackwardPIDRegion_tan * BackwardTOF_zmin" />
<constant name="BackwardTOFMod_rmax" value="BackwardPIDRegion_rmax" />
<constant name="BackwardTOFMod_x1" value="2 * BackwardTOFMod_rmin * tan(TOFEndcapMod_angle/2)" />
<constant name="BackwardTOFMod_x2" value="2 * BackwardTOFMod_rmax * sin(TOFEndcapMod_angle/2)" />
<constant name="BackwardTOFMod_y" value="BackwardTOFMod_rmax * cos(TOFEndcapMod_angle/2) - BackwardTOFMod_rmin" />
<constant name="BackwardTOFMod1_zmin" value="BackwardTOF_zmin" />
<constant name="BackwardTOFMod2_zmin" value="BackwardTOF_zmin + BackwardTOFMod_offset" />
<constant name="BackwardTOFLayer_rmin" value="BackwardTOFMod_rmin - 1*um" />
<constant name="BackwardTOFLayer_rmax" value="BackwardTOFMod_rmax + 1*um" />
<constant name="BackwardTOFLayer1_zmin" value="BackwardTOFMod1_zmin - TOFEndcapLayer_thickness / 2" />
<constant name="BackwardTOFLayer2_zmin" value="BackwardTOFMod2_zmin - TOFEndcapLayer_thickness / 2" />
</define>
<detectors>
......@@ -52,40 +72,39 @@
readout="TOFEndcapHits"
vis="TOFVis"
reflect="false">
<module name="Module1" vis="TOFVis">
<trd x1="ForwardTOFMod1_x1/2.0" x2="ForwardTOFMod1_x2/2.0" z="ForwardTOFMod1_y/2"/>
<module_component thickness="ITS3Thickness" material="Silicon" sensitive="true"/>
<module_component thickness="TOFEndcapService_thickness" material="Silicon"/>
</module>
<module name="Module2" vis="TOFVis">
<trd x1="ForwardTOFMod2_x1/2.0" x2="ForwardTOFMod2_x2/2.0" z="ForwardTOFMod2_y/2"/>
<module_component thickness="TOFEndcapSensor_thickness" material="Silicon" sensitive="true"/>
<module_component thickness="TOFEndcapService_thickness" material="Silicon"/>
<module name="ForwardModule" vis="TOFModuleVis">
<trd x1="ForwardTOFMod_x1/2.0" x2="ForwardTOFMod_x2/2.0" z="ForwardTOFMod_y/2"/>
<comment> TRDs are built back-to-front </comment>
<module_component thickness="TOFEndcapService_thickness" material="Silicon" vis="TOFVis"/>
<module_component thickness="TOFEndcapSensor_thickness" material="Silicon" sensitive="true" vis="TOFSensorVis"/>
</module>
<layer id="1">
<envelope vis="TOFVis"
rmin="ForwardTOF_rmin1"
rmax="ForwardTOF_rmax1"
length="BackwardTOF_thickness"
zstart="ForwardTOF_zmin" />
<ring vis="TOFVis"
r="ForwardTOF_rmin1+ForwardTOFMod1_y/2.0"
zstart="0.0*mm"
nmodules="12" dz="2.5 * mm" module="Module1" />
<envelope vis="TOFLayerVis"
rmin="ForwardTOFLayer_rmin"
rmax="ForwardTOFLayer_rmax"
length="TOFEndcapLayer_thickness"
zstart="ForwardTOFLayer1_zmin" />
<ring
r="ForwardTOFMod_rmin + ForwardTOFMod_y/2.0"
zstart="0"
nmodules="TOFEndcapMod_count"
dz="TOFEndcapMod_dz"
module="ForwardModule" />
</layer>
<layer id="2">
<envelope vis="TOFVis"
rmin="ForwardTOF_rmin2"
rmax="ForwardTOF_rmax2"
length="BackwardTOF_thickness"
zstart="ForwardTOF_zmin + ForwardTOF_dz" />
<ring vis="TOFVis"
r="ForwardTOF_rmin2+ForwardTOFMod2_y/2.0"
zstart="0.0*mm"
nmodules="12" dz="2.5 * mm" module="Module2" />
<envelope vis="TOFLayerVis"
rmin="ForwardTOFLayer_rmin"
rmax="ForwardTOFLayer_rmax"
length="TOFEndcapLayer_thickness"
zstart="ForwardTOFLayer2_zmin" />
<ring
r="ForwardTOFMod_rmin + ForwardTOFMod_y/2.0"
zstart="0"
nmodules="TOFEndcapMod_count"
dz="TOFEndcapMod_dz"
module="ForwardModule" />
</layer>
</detector>
<detector
id="BackwardTOF_ID"
name="BackwardTOF"
......@@ -93,44 +112,44 @@
readout="TOFEndcapHits"
vis="TOFVis"
reflect="true">
<module name="Module1" vis="TOFVis">
<trd x1="BackwardTOFMod1_x1/2.0" x2="BackwardTOFMod1_x2/2.0" z="BackwardTOFMod1_y/2"/>
<module_component thickness="TOFEndcapSensor_thickness" material="Silicon" sensitive="true"/>
<module_component thickness="TOFEndcapService_thickness" material="Silicon"/>
</module>
<module name="Module2" vis="TOFVis">
<trd x1="BackwardTOFMod2_x1/2.0" x2="BackwardTOFMod2_x2/2.0" z="BackwardTOFMod2_y/2"/>
<module_component thickness="TOFEndcapSensor_thickness" material="Silicon" sensitive="true"/>
<module_component thickness="TOFEndcapService_thickness" material="Silicon"/>
<module name="BackwardModule" vis="TOFModuleVis">
<trd x1="BackwardTOFMod_x1/2.0" x2="BackwardTOFMod_x2/2.0" z="BackwardTOFMod_y/2"/>
<comment> TRDs are built back-to-front </comment>
<module_component thickness="TOFEndcapService_thickness" material="Silicon" vis="TOFVis"/>
<module_component thickness="TOFEndcapSensor_thickness" material="Silicon" sensitive="true" vis="TOFSensorVis"/>
</module>
<layer id="1">
<envelope vis="TOFVis"
rmin="BackwardTOF_rmin1 + 0 * 1.2*cm"
rmax="BackwardTOF_rmax1"
length="BackwardTOF_thickness"
zstart="BackwardTOF_zmin" />
<ring vis="TOFVis"
r="BackwardTOF_rmin1+BackwardTOFMod1_y/2.0"
zstart="0.0*mm"
nmodules="12" dz="2.5 * mm" module="Module1" />
<envelope vis="TOFLayerVis"
rmin="BackwardTOFLayer_rmin"
rmax="BackwardTOFLayer_rmax"
length="TOFEndcapLayer_thickness"
zstart="BackwardTOFLayer1_zmin" />
<ring
r="BackwardTOFMod_rmin + BackwardTOFMod_y/2.0"
zstart="0"
nmodules="TOFEndcapMod_count"
dz="TOFEndcapMod_dz"
module="BackwardModule" />
</layer>
<layer id="2">
<envelope vis="TOFVis"
rmin="BackwardTOF_rmin2"
rmax="BackwardTOF_rmax2"
length="BackwardTOF_thickness"
zstart="BackwardTOF_zmin + BackwardTOF_dz" />
<ring vis="TOFVis"
r="BackwardTOF_rmin2+BackwardTOFMod2_y/2.0"
zstart="0.0*mm"
nmodules="12" dz="2.5 * mm" module="Module2" />
<envelope vis="TOFLayerVis"
rmin="BackwardTOFLayer_rmin"
rmax="BackwardTOFLayer_rmax"
length="TOFEndcapLayer_thickness"
zstart="BackwardTOFLayer2_zmin" />
<ring
r="BackwardTOFMod_rmin + BackwardTOFMod_y/2.0"
zstart="0"
nmodules="TOFEndcapMod_count"
dz="TOFEndcapMod_dz"
module="BackwardModule" />
</layer>
</detector>
</detectors>
<readouts>
<readout name="TOFEndcapHits">
<segmentation type="CartesianGridXZ" grid_size_x="0.20*mm" grid_size_z="0.20*mm" />
<segmentation type="CartesianGridXZ" grid_size_x="50*um" grid_size_z="50*um" />
<id>system:8,layer:4,module:12,sensor:2,x:32:-16,z:-16</id>
</readout>
</readouts>
......
compact/tracking_config_acadia.xml
View file @ 1008a184
......@@ -9,6 +9,56 @@
### Silicon tracking configuration
</documentation>
<documentation level="5">
### Tracker subassemblies for ACTS
</documentation>
<detectors>
<detector id="VertexSubAssembly_0_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexEndcapN" />
<composite name="VertexBarrel" />
<composite name="VertexEndcapP" />
</detector>
<detector id="TrackerSubAssembly_0_ID"
name="TrackerBarrelSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerEndcapN_Inner"/>
<composite name="TrackerBarrel_Inner"/>
<composite name="TrackerEndcapP_Inner"/>
</detector>
<detector id="TrackerSubAssembly_1_ID"
name="TrackerSubAssembly_Outer"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Outer"/>
<composite name="TrackerEndcapP_Outer"/>
<composite name="TrackerEndcapN_Outer"/>
</detector>
<detector id="TrackerSubAssembly_1_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="SubAssemblyVis">
<composite name="GEMTrackerEndcapP"/>
<composite name="GEMTrackerEndcapN"/>
</detector>
</detectors>
<documentation>
### Material map for ACTS
https://eicweb.phy.anl.gov/EIC/detectors/athena/-/issues/128
</documentation>
<plugins>
<plugin name="FileLoader">
<arg value="file:calibrations/materials-map.cbor"/>
<arg value="url:https://eicweb.phy.anl.gov/EIC/detectors/athena/uploads/458fee1b8c95bf408159fe70d654b8c0/material-maps.cbor"/>
</plugin>
</plugins>
<include ref="vertex_tracker.xml"/>
<include ref="central_tracker.xml"/>
<include ref="gem_tracker_endcap.xml"/>
......
compact/tracking_config_canyonlands.xml 0 → 100644
View file @ 1008a184
<lccdd>
<display>
</display>
<define>
</define>
<documentation level="10">
### Silicon tracking configuration
</documentation>
<documentation level="5">
### Tracker subassemblies for ACTS
</documentation>
<detectors>
<detector id="VertexSubAssembly_0_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexBarrel" />
</detector>
<detector id="TrackerSubAssembly_0_ID"
name="InnerTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="InnerTrackerEndcapN"/>
<composite name="InnerTrackerBarrel"/>
<composite name="InnerTrackerEndcapP"/>
</detector>
<detector id="TrackerSubAssembly_1_ID"
name="MedialTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="MedialTrackerEndcapN"/>
<composite name="MedialTrackerBarrel"/>
<composite name="MedialTrackerEndcapP"/>
</detector>
<detector id="TrackerSubAssembly_2_ID"
name="OuterTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="OuterTrackerCompositeEndcapN"/>
<composite name="OuterTrackerBarrel"/>
<composite name="OuterTrackerCompositeEndcapP"/>
</detector>
<!--
<detector id="TrackerSubAssembly_3_ID"
name="EcalBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
</detector>
-->
<detector id="TrackerSubAssembly_4_ID"
name="ForwardBackwardTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="ForwardGEM"/>
<composite name="BackwardNullTracker"/>
</detector>
<detector id="TrackerCompositeEndcapN_0_ID"
name="OuterTrackerCompositeEndcapN"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="-1*um" />
<composite name="OuterTrackerEndcapN"/>
<composite name="GEMEndcapN"/>
</detector>
<detector id="TrackerCompositeEndcapP_0_ID"
name="OuterTrackerCompositeEndcapP"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="0*cm" />
<composite name="OuterTrackerEndcapP"/>
<composite name="GEMEndcapP"/>
</detector>
<detector id="TrackerCompositeEndcapN_1_ID"
name="BackwardNullTracker"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="-1*um" />
</detector>
</detectors>
<documentation>
### Material map for ACTS
https://eicweb.phy.anl.gov/EIC/detectors/athena/-/issues/127
</documentation>
<plugins>
<plugin name="FileLoader">
<arg value="file:calibrations/materials-map.cbor"/>
<arg value="url:https://eicweb.phy.anl.gov/EIC/detectors/athena/uploads/979a4ed2d01a023b70237e39670bd31b/material-maps.cbor"/>
</plugin>
</plugins>
<include ref="vertex_tracker_3layers.xml"/>
<include ref="central_tracker_hybrid_v2.xml"/>
</lccdd>
compact/tracking_config_deathvalley.xml 0 → 100644
View file @ 1008a184
<lccdd>
<display>
</display>
<define>
</define>
<documentation level="10">
### Silicon tracking configuration
</documentation>
<documentation level="5">
### Tracker subassemblies for ACTS
</documentation>
<detectors>
<detector id="VertexSubAssembly_0_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexBarrel" />
</detector>
<detector id="TrackerSubAssembly_0_ID"
name="InnerTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="InnerTrackerEndcapN"/>
<composite name="InnerTrackerBarrel"/>
<composite name="InnerTrackerEndcapP"/>
</detector>
<detector id="TrackerSubAssembly_1_ID"
name="MedialTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="MedialTrackerEndcapN"/>
<composite name="MedialTrackerCompositeBarrel"/>
<composite name="MedialTrackerEndcapP"/>
</detector>
<detector id="TrackerSubAssembly_2_ID"
name="OuterTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="OuterTrackerCompositeEndcapN"/>
<composite name="OuterTrackerBarrel"/>
<composite name="OuterTrackerCompositeEndcapP"/>
</detector>
<!--
<detector id="TrackerSubAssembly_3_ID"
name="EcalBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
</detector>
-->
<detector id="TrackerSubAssembly_4_ID"
name="ForwardBackwardTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="ForwardGEM"/>
<composite name="BackwardNullTracker"/>
</detector>
<detector id="TrackerCompositeBarrel_0_ID"
name="MedialTrackerCompositeBarrel"
type="athena_CompositeTracker"
actsType="barrel"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="0*um" />
<composite name="MedialTrackerBarrel"/>
<composite name="BarrelTOF"/>
</detector>
<detector id="TrackerCompositeEndcapN_0_ID"
name="OuterTrackerCompositeEndcapN"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="-1*um" />
<composite name="OuterTrackerEndcapN"/>
<composite name="GEMEndcapN"/>
</detector>
<detector id="TrackerCompositeEndcapP_0_ID"
name="OuterTrackerCompositeEndcapP"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="0*cm" />
<composite name="OuterTrackerEndcapP"/>
<composite name="GEMEndcapP"/>
</detector>
<detector id="TrackerCompositeEndcapN_1_ID"
name="BackwardNullTracker"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="-1*um" />
</detector>
</detectors>
<documentation>
### Material map for ACTS
https://eicweb.phy.anl.gov/EIC/detectors/athena/-/issues/127
</documentation>
<plugins>
<plugin name="FileLoader">
<arg value="cache:$DETECTOR_PATH"/>
<arg value="file:calibrations/materials-map.cbor"/>
<arg value="url:https://eicweb.phy.anl.gov/EIC/detectors/athena/uploads/4a4e7c8eb6089b634d762d112c89bd5d/material-maps.cbor"/>
</plugin>
</plugins>
<include ref="vertex_tracker_3layers.xml"/>
<include ref="central_tracker_hybrid_v2.xml"/>
</lccdd>
compact/ci_ecal_shashlik.xml → compact/unused/ecal_forward_shashlik.xml
View file @ 1008a184
<lccdd>
<define>
<constant name="EcalEndcapP_rmax" value="Solenoid_rmax "/>
</define>
......