Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • EIC/detectors/athena
  • zwzhao/athena
  • FernandoTA/athena
  • palspeic/athena
4 results
Show changes
Hide whitespace changes
Inline Side-by-side
Showing
with 788 additions and 138 deletions
compact/tracking_config_acadia.xml 0 → 100644
View file @ 1008a184
<lccdd>
<display>
</display>
<define>
</define>
<documentation level="10">
### Silicon tracking configuration
</documentation>
<documentation level="5">
### Tracker subassemblies for ACTS
</documentation>
<detectors>
<detector id="VertexSubAssembly_0_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexEndcapN" />
<composite name="VertexBarrel" />
<composite name="VertexEndcapP" />
</detector>
<detector id="TrackerSubAssembly_0_ID"
name="TrackerBarrelSubAssembly_Inner"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerEndcapN_Inner"/>
<composite name="TrackerBarrel_Inner"/>
<composite name="TrackerEndcapP_Inner"/>
</detector>
<detector id="TrackerSubAssembly_1_ID"
name="TrackerSubAssembly_Outer"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="TrackerBarrel_Outer"/>
<composite name="TrackerEndcapP_Outer"/>
<composite name="TrackerEndcapN_Outer"/>
</detector>
<detector id="TrackerSubAssembly_1_ID"
name="OuterTrackingSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="SubAssemblyVis">
<composite name="GEMTrackerEndcapP"/>
<composite name="GEMTrackerEndcapN"/>
</detector>
</detectors>
<documentation>
### Material map for ACTS
https://eicweb.phy.anl.gov/EIC/detectors/athena/-/issues/128
</documentation>
<plugins>
<plugin name="FileLoader">
<arg value="file:calibrations/materials-map.cbor"/>
<arg value="url:https://eicweb.phy.anl.gov/EIC/detectors/athena/uploads/458fee1b8c95bf408159fe70d654b8c0/material-maps.cbor"/>
</plugin>
</plugins>
<include ref="vertex_tracker.xml"/>
<include ref="central_tracker.xml"/>
<include ref="gem_tracker_endcap.xml"/>
</lccdd>
compact/tracking_config_accadia.xml deleted 100644 → 0
View file @ 26bc6787
<lccdd>
<display>
</display>
<define>
</define>
<documentation level="10">
### Silicon tracking configuration
</documentation>
<include ref="vertex_tracker.xml"/>
<include ref="central_tracker.xml"/>
<include ref="gem_tracker_endcap.xml"/>
</lccdd>
compact/tracking_config_canyonlands.xml 0 → 100644
View file @ 1008a184
<lccdd>
<display>
</display>
<define>
</define>
<documentation level="10">
### Silicon tracking configuration
</documentation>
<documentation level="5">
### Tracker subassemblies for ACTS
</documentation>
<detectors>
<detector id="VertexSubAssembly_0_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexBarrel" />
</detector>
<detector id="TrackerSubAssembly_0_ID"
name="InnerTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="InnerTrackerEndcapN"/>
<composite name="InnerTrackerBarrel"/>
<composite name="InnerTrackerEndcapP"/>
</detector>
<detector id="TrackerSubAssembly_1_ID"
name="MedialTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="MedialTrackerEndcapN"/>
<composite name="MedialTrackerBarrel"/>
<composite name="MedialTrackerEndcapP"/>
</detector>
<detector id="TrackerSubAssembly_2_ID"
name="OuterTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="OuterTrackerCompositeEndcapN"/>
<composite name="OuterTrackerBarrel"/>
<composite name="OuterTrackerCompositeEndcapP"/>
</detector>
<!--
<detector id="TrackerSubAssembly_3_ID"
name="EcalBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
</detector>
-->
<detector id="TrackerSubAssembly_4_ID"
name="ForwardBackwardTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="ForwardGEM"/>
<composite name="BackwardNullTracker"/>
</detector>
<detector id="TrackerCompositeEndcapN_0_ID"
name="OuterTrackerCompositeEndcapN"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="-1*um" />
<composite name="OuterTrackerEndcapN"/>
<composite name="GEMEndcapN"/>
</detector>
<detector id="TrackerCompositeEndcapP_0_ID"
name="OuterTrackerCompositeEndcapP"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="0*cm" />
<composite name="OuterTrackerEndcapP"/>
<composite name="GEMEndcapP"/>
</detector>
<detector id="TrackerCompositeEndcapN_1_ID"
name="BackwardNullTracker"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="-1*um" />
</detector>
</detectors>
<documentation>
### Material map for ACTS
https://eicweb.phy.anl.gov/EIC/detectors/athena/-/issues/127
</documentation>
<plugins>
<plugin name="FileLoader">
<arg value="file:calibrations/materials-map.cbor"/>
<arg value="url:https://eicweb.phy.anl.gov/EIC/detectors/athena/uploads/979a4ed2d01a023b70237e39670bd31b/material-maps.cbor"/>
</plugin>
</plugins>
<include ref="vertex_tracker_3layers.xml"/>
<include ref="central_tracker_hybrid_v2.xml"/>
</lccdd>
compact/tracking_config_deathvalley.xml 0 → 100644
View file @ 1008a184
<lccdd>
<display>
</display>
<define>
</define>
<documentation level="10">
### Silicon tracking configuration
</documentation>
<documentation level="5">
### Tracker subassemblies for ACTS
</documentation>
<detectors>
<detector id="VertexSubAssembly_0_ID"
name="VertexBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="VertexBarrel" />
</detector>
<detector id="TrackerSubAssembly_0_ID"
name="InnerTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="InnerTrackerEndcapN"/>
<composite name="InnerTrackerBarrel"/>
<composite name="InnerTrackerEndcapP"/>
</detector>
<detector id="TrackerSubAssembly_1_ID"
name="MedialTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="MedialTrackerEndcapN"/>
<composite name="MedialTrackerCompositeBarrel"/>
<composite name="MedialTrackerEndcapP"/>
</detector>
<detector id="TrackerSubAssembly_2_ID"
name="OuterTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="OuterTrackerCompositeEndcapN"/>
<composite name="OuterTrackerBarrel"/>
<composite name="OuterTrackerCompositeEndcapP"/>
</detector>
<!--
<detector id="TrackerSubAssembly_3_ID"
name="EcalBarrelSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
</detector>
-->
<detector id="TrackerSubAssembly_4_ID"
name="ForwardBackwardTrackerSubAssembly"
type="DD4hep_SubdetectorAssembly"
vis="TrackerSubAssemblyVis">
<composite name="ForwardGEM"/>
<composite name="BackwardNullTracker"/>
</detector>
<detector id="TrackerCompositeBarrel_0_ID"
name="MedialTrackerCompositeBarrel"
type="athena_CompositeTracker"
actsType="barrel"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="0*um" />
<composite name="MedialTrackerBarrel"/>
<composite name="BarrelTOF"/>
</detector>
<detector id="TrackerCompositeEndcapN_0_ID"
name="OuterTrackerCompositeEndcapN"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="-1*um" />
<composite name="OuterTrackerEndcapN"/>
<composite name="GEMEndcapN"/>
</detector>
<detector id="TrackerCompositeEndcapP_0_ID"
name="OuterTrackerCompositeEndcapP"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="0*cm" />
<composite name="OuterTrackerEndcapP"/>
<composite name="GEMEndcapP"/>
</detector>
<detector id="TrackerCompositeEndcapN_1_ID"
name="BackwardNullTracker"
type="athena_CompositeTracker"
actsType="endcap"
vis="TrackerSubAssemblyVis">
<position x="0*cm" y="0*cm" z="-1*um" />
</detector>
</detectors>
<documentation>
### Material map for ACTS
https://eicweb.phy.anl.gov/EIC/detectors/athena/-/issues/127
</documentation>
<plugins>
<plugin name="FileLoader">
<arg value="cache:$DETECTOR_PATH"/>
<arg value="file:calibrations/materials-map.cbor"/>
<arg value="url:https://eicweb.phy.anl.gov/EIC/detectors/athena/uploads/4a4e7c8eb6089b634d762d112c89bd5d/material-maps.cbor"/>
</plugin>
</plugins>
<include ref="vertex_tracker_3layers.xml"/>
<include ref="central_tracker_hybrid_v2.xml"/>
</lccdd>
compact/ce_ecal_crystal_glass.xml → compact/unused/ecal_backward_crystal_glass.xml
View file @ 1008a184
......@@ -60,32 +60,29 @@
<lines sector="2" mirrorx="true" mirrory="true">
<module sizex="GlassModule_sx" sizey="GlassModule_sy" sizez="GlassModule_sz" material="PbGlass" vis="EcalEndcapNModuleVis"/>
<wrapper thickness="GlassModule_wrap" material="Epoxy" vis="InvisibleWithDaughters"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*1/2." z="GlassModule_z0" begin="13" nmods="13"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*3/2." z="GlassModule_z0" begin="13" nmods="13"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*5/2." z="GlassModule_z0" begin="13" nmods="13"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*7/2." z="GlassModule_z0" begin="12" nmods="14"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*9/2." z="GlassModule_z0" begin="12" nmods="14"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*11/2." z="GlassModule_z0" begin="12" nmods="14"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*13/2." z="GlassModule_z0" begin="11" nmods="15"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*15/2." z="GlassModule_z0" begin="10" nmods="15"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*17/2." z="GlassModule_z0" begin="9" nmods="15"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*19/2." z="GlassModule_z0" begin="8" nmods="16"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*21/2." z="GlassModule_z0" begin="7" nmods="16"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*23/2." z="GlassModule_z0" begin="6" nmods="17"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*25/2." z="GlassModule_z0" begin="3" nmods="19"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*27/2." z="GlassModule_z0" begin="0" nmods="22"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*29/2." z="GlassModule_z0" begin="0" nmods="21"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*31/2." z="GlassModule_z0" begin="0" nmods="20"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*33/2." z="GlassModule_z0" begin="0" nmods="20"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*35/2." z="GlassModule_z0" begin="0" nmods="19"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*37/2." z="GlassModule_z0" begin="0" nmods="19"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*39/2." z="GlassModule_z0" begin="0" nmods="17"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*41/2." z="GlassModule_z0" begin="0" nmods="15"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*43/2." z="GlassModule_z0" begin="0" nmods="14"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*45/2." z="GlassModule_z0" begin="0" nmods="12"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*47/2." z="GlassModule_z0" begin="0" nmods="10"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*49/2." z="GlassModule_z0" begin="0" nmods="8"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*51/2." z="GlassModule_z0" begin="0" nmods="7"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*1/2." z="GlassModule_z0" begin="13" nmods="10"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*3/2." z="GlassModule_z0" begin="13" nmods="10"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*5/2." z="GlassModule_z0" begin="13" nmods="10"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*7/2." z="GlassModule_z0" begin="12" nmods="10"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*9/2." z="GlassModule_z0" begin="12" nmods="10"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*11/2." z="GlassModule_z0" begin="12" nmods="10"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*13/2." z="GlassModule_z0" begin="11" nmods="11"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*15/2." z="GlassModule_z0" begin="10" nmods="11"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*17/2." z="GlassModule_z0" begin="9" nmods="12"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*19/2." z="GlassModule_z0" begin="8" nmods="13"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*21/2." z="GlassModule_z0" begin="7" nmods="13"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*23/2." z="GlassModule_z0" begin="6" nmods="14"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*25/2." z="GlassModule_z0" begin="3" nmods="16"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*27/2." z="GlassModule_z0" begin="0" nmods="18"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*29/2." z="GlassModule_z0" begin="0" nmods="18"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*31/2." z="GlassModule_z0" begin="0" nmods="16"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*33/2." z="GlassModule_z0" begin="0" nmods="16"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*35/2." z="GlassModule_z0" begin="0" nmods="14"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*37/2." z="GlassModule_z0" begin="0" nmods="13"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*39/2." z="GlassModule_z0" begin="0" nmods="11"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*41/2." z="GlassModule_z0" begin="0" nmods="10"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*43/2." z="GlassModule_z0" begin="0" nmods="7"/>
<line axis="x" x="GlassModule_dx/2." y="GlassModule_dy*45/2." z="GlassModule_z0" begin="0" nmods="3"/>
</lines>
</placements>
</detector>
......
compact/ecal_barrel_hybrid.xml → compact/unused/ecal_barrel_hybrid.xml
View file @ 1008a184
......@@ -32,7 +32,7 @@
<constant name="EcalBarrel_ModRepeat" value="CaloSides"/>
<constant name="EcalBarrel_ModLength" value="0.5*m"/>
<constant name="EcalBarrel_ModWidth" value="0.5*m"/>
<constant name="EcalBarrel_AvailThickness" value="EcalBarrel_TotalThickness-EcalBarrel_Support_thickness"/>
<constant name="EcalBarrel_AvailThickness" value="EcalBarrelEnvelope_thickness-EcalBarrel_Support_thickness"/>
<constant name="EcalBarrel_ImagingLayerThickness"
value="EcalBarrel_SiliconThickness
+ EcalBarrel_ElectronicsThickness
......
compact/ci_ecal_shashlik.xml → compact/unused/ecal_forward_shashlik.xml
View file @ 1008a184
<lccdd>
<define>
<constant name="EcalEndcapP_rmax" value="Solenoid_rmax "/>
</define>
......
compact/unused/mrich_alt.xml 0 → 100644
View file @ 1008a184
<lccdd>
<comment> MRICH (alternative design) </comment>
<define>
<constant name="MRICH_rmin" value="10*cm"/>
<constant name="MRICH_rmax" value="BackwardPIDRegion_rmax"/>
<constant name="MRICH_length" value="BackwardPIDRegion_length"/>
<constant name="MRICH_zmin" value="BackwardPIDRegion_zmin"/>
<constant name="MRICHAerogel_thickness" value="30.0*mm"/>
<constant name="MRICHAerogel_width" value="126.5*mm"/>
<constant name="MRICHFoam_thickness" value="2*mm"/>
<constant name="MRICHFresnelLens_thickness" value="0.06*inch"/>
<constant name="MRICHAerogelLensGap_thickness" value="2*mm"/>
<constant name="MRICHPhotoDet_thickness" value="1.5*mm"/>
<constant name="MRICHPhotoDet_length" value="48.5*mm"/>
<constant name="MRICHGlassWindow_width" value="103.5*mm"/>
<constant name="MRICHGlassPhotoDet_thickness" value="5.0*mm"/>
<constant name="MRICHPhotoDetMCPlate_thickness" value="0.3*mm"/> <!-- FIXME: should be 1.2*mm with PyrexGlass25 -->
<constant name="MRICHPhotoDetAnode_thickness" value="3.8*mm"/>
<constant name="MRICHPhotoDetPCB_thickness" value="2.0*mm"/>
<constant name="MRICHPhotoDetCopper_thickness" value="0.1*mm"/>
<constant name="MRICHPhotoDetKapton_thickness" value="0.2*mm"/>
<constant name="MRICHRearExtraSpace_thickness" value="0.3*mm"/>
<constant name="MRICHLensPhotoDet_length" value="136.4*mm"/>
<constant name="MRICHFresnelLensEffectiveDiameter" value="6.0*inch"/>
<constant name="MRICHFresnelLensGroove_pitch" value="inch/125"/>
<constant name="MRICHCarbonFrame_thickness" value="1.0*mm"/>
<constant name="MRICHCarbonFrame_width" value="MRICHAerogel_width+2.0*MRICHFoam_thickness + 2.0*MRICHCarbonFrame_thickness"/>
<constant name="MRICHModules_nx" value="floor((MRICH_rmax-MRICH_rmin)/MRICHCarbonFrame_width)"/>
<constant name="MRICHModules_ny" value="floor((MRICH_rmax-MRICH_rmin)/MRICHCarbonFrame_width)"/>
<constant name="MRICHCarbonFrame_length"
value="MRICHAerogel_thickness
+ 2.0*MRICHCarbonFrame_thickness
+ 2.0*MRICHFoam_thickness
+ MRICHAerogelLensGap_thickness
+ MRICHFresnelLens_thickness
+ MRICHLensPhotoDet_length
+ MRICHGlassPhotoDet_thickness
+ 2.0*MRICHPhotoDetMCPlate_thickness
+ MRICHPhotoDetAnode_thickness
+ MRICHPhotoDetPCB_thickness
+ MRICHPhotoDetCopper_thickness
+ MRICHPhotoDetKapton_thickness
+ MRICHRearExtraSpace_thickness "/>
</define>
<limits>
</limits>
<regions>
</regions>
<display>
</display>
<detectors>
<detector id="MRICH_ID" name="MRICH" type="athena_MRICH"
readout="MRICHHits"
reflect="true"
projective="false"
vis="InvisibleWithDaughters"
material="Air">
<dimensions rmin="MRICH_rmin" rmax="MRICH_rmax" length="abs(MRICH_length)" zmin="MRICH_zmin"/>
<envelope thickness="MRICHCarbonFrame_thickness" material="CarbonFiber"/>
<module name="MRICH_module1"
vis="InvisibleWithDaughters"
width="MRICHCarbonFrame_width"
height="MRICHCarbonFrame_width"
length="MRICHCarbonFrame_length">
<aerogel vis="MRICH_aerogel_vis"
length="MRICHAerogel_thickness"
width="MRICHAerogel_width"
material="AerogelOptical">
<frame vis="MRICH_frame_vis" thickness="MRICHFoam_thickness" material="PolystyreneFoam" />
</aerogel>
<lens vis="MRICH_lens_vis" thickness="MRICHFresnelLens_thickness"
pitch="MRICHFresnelLensGroove_pitch" focal_length="6.0*inch"
effective_diameter="MRICHFresnelLensEffectiveDiameter"
width="MRICHAerogel_width"
material="AcrylicOptical"/>
<space thickness="MRICHLensPhotoDet_length"/>
<photodet width="MRICHGlassWindow_width" thickness="MRICHGlassPhotoDet_thickness" material="PyrexGlassOptical">
<sensor nx="2" ny="2" thickness="MRICHPhotoDet_thickness" width="MRICHPhotoDet_length" material="SiliconOxide"/>
<layer thickness="MRICHPhotoDetMCPlate_thickness" material="PyrexGlass"/> <!-- FIXME: should be PyrexGlass25 with 1.2*mm thickness -->
<layer thickness="MRICHPhotoDetMCPlate_thickness" material="PyrexGlass"/> <!-- FIXME: should be PyrexGlass25 with 1.2*mm thickness -->
<layer thickness="MRICHPhotoDetAnode_thickness" material="AluminumOxide"/>
<layer thickness="MRICHPhotoDetPCB_thickness" material="Fr4"/>
<layer thickness="MRICHPhotoDetCopper_thickness" material="Copper"/>
<layer thickness="MRICHPhotoDetKapton_thickness" material="Kapton"/>
</photodet>
</module>
</detector>
</detectors>
<readouts>
<readout name="MRICHHits">
<segmentation type="CartesianGridXY" grid_size_x="3*mm" grid_size_y="3*mm" />
<id>system:8,module:14,sensor:8,x:32:-16,y:-16</id>
</readout>
</readouts>
<!--Globals>
<Parameter Name="mrichInfo" Value="mrichmod/mrich_1_geoparams-0-0-4294967295-1527211159.xml"/>
</Globals-->
</lccdd>
compact/vertex_tracker.xml
View file @ 1008a184
......@@ -5,8 +5,8 @@
THis value probably can live in the file that includes this one.
</comment>
<constant name="ITS3Thickness" value="40*um"/>
<constant name="TrackerCarbon_thickness" value="0.12*mm"/>
<constant name="TrackerEndcapAluminum_thickness" value="0.15*mm"/>
<constant name="VertexCarbon_thickness" value="0.12*mm"/>
<constant name="VertexEndcapAluminumThickness" value="0.15*mm"/>
<documentation>
#### Vertex Tracker Barrel Parameters
......@@ -27,7 +27,14 @@ Simple carbon fiber support shell.
</documentation>
<constant name="VertexBarrel_length" value="VertexTrackerBarrel_length"/>
<constant name="VertexBarrel_length" value="300.0*mm"/>
<constant name="VertexTrackerEndcapP_rmin" value="VertexTrackingRegion_rmin"/>
<constant name="VertexTrackerEndcapN_rmin" value="VertexTrackingRegion_rmin"/>
<constant name="VertexTrackerEndcapP_rmax" value="VertexTrackingRegion_rmax"/>
<constant name="VertexTrackerEndcapN_rmax" value="VertexTrackingRegion_rmax"/>
<constant name="VertexTrackerEndcapP_zmax" value="VertexTrackingRegionP_zmax"/>
<constant name="VertexTrackerEndcapN_zmax" value="VertexTrackingRegionN_zmax"/>
<constant name="VertexBarrelLayer_length" value="VertexBarrel_length - 1*mm"/>
<constant name="VertexBarrelMod_length" value="VertexBarrel_length - 2*mm"/>
......@@ -54,19 +61,36 @@ Simple carbon fiber support shell.
<constant name="VertexBarrelSupport_rmax" value="VertexBarrelSupport_rmin + VertexBarrelSupport_thickness"/>
<constant name="VertexBarrelSupport_length" value="VertexBarrelLayer_length"/>
<constant name="VertexTrackerEndcapN_zmin" value="VertexTrackerBarrel_zmax"/>
<constant name="VertexTrackerEndcapP_zmin" value="VertexTrackerBarrel_zmax"/>
<constant name="VertexTrackerEndcapN_zmin" value="25*cm"/>
<constant name="VertexTrackerEndcapP_zmin" value="25*cm"/>
<constant name="VertexEndcap_NLayers" value="1"/>
<constant name="VertexTrackerEndcap_delta" value="(VertexTrackerEndcapP_zmax - VertexTrackerEndcapP_zmin)/VertexEndcap_NLayers"/>
<constant name="VertexEndcapLayer_dz" value="(VertexTrackerEndcapP_zmax - VertexTrackerEndcapP_zmin)/VertexEndcap_NLayers"/>
<constant name="VertexEndcapLayer_thickness" value="min(5*cm,VertexEndcapLayer_dz)"/>
<constant name="VertexEndcapLayer_dz" value="2*cm"/>
<constant name="VertexEndcapLayer_thickness" value="min(3*cm,VertexEndcapLayer_dz-0.5*cm)"/>
<constant name="VertexEndcapModOpeningAngle" value="30.0*degree"/>
<constant name="VertexEndcap_NModules" value="12"/>
<constant name="VertexEndcapMod_dz" value="2.5*mm"/>
<constant name="VertexEndcapModOpeningAngle" value="360.0/VertexEndcap_NModules*degree + 0.5*degree"/>
<constant name="VertexEndcapMod1_x1" value="2.0*VertexTrackerEndcapP_rmin*sin(VertexEndcapModOpeningAngle/2.0)"/>
<constant name="VertexEndcapMod1_x2" value="2.0*VertexTrackerEndcapP_rmax*sin(VertexEndcapModOpeningAngle/2.0)"/>
<constant name="VertexEndcapMod1_y" value="VertexTrackerEndcapP_rmax*cos(VertexEndcapModOpeningAngle/2.0) - VertexTrackerEndcapP_rmin"/>
<comment> cone connecting vertex barrel to endcap </comment>
<!-- <constant name="VertexEndcapCone_zmax" value="VertexEndcapShell_zmin-0.2*cm"/> -->
<constant name="VertexSupportCarbon_thickness" value="2*mm"/>
<constant name="VertexEndcapCone_zmin" value="VertexBarrelLayer_length/2.0 + 0.1*cm"/>
<constant name="VertexEndcapCone_zmax" value="VertexTrackerEndcapN_zmin - 0.1*cm"/>
<constant name="VertexEndcapCone_rmin1" value="VertexEndcapCone_zmin * 36.26/49"/>
<!-- <constant name="VertexEndcapCone_rmin1" value="TrackerEndcapInner_rmax1"/> -->
<constant name="VertexEndcapCone_rmin2" value="VertexTrackerEndcapP_rmax"/>
<constant name="VertexEndcapConeService_rmin1" value="VertexEndcapCone_rmin1+VertexSupportCarbon_thickness+0.1*mm"/>
<constant name="VertexEndcapConeService_rmin2" value="VertexEndcapCone_rmin2+VertexSupportCarbon_thickness+0.1*mm"/>
<constant name="VertexEndcapConeService_thickness" value="0.6*mm"/>
<constant name="VertexEndcapCone_length" value="VertexEndcapCone_zmax - VertexEndcapCone_zmin"/>
<comment>
Extra parameters to approximate a cylinder as a set of skinny staves
due to ACTS limitations.
......@@ -81,8 +105,11 @@ Simple carbon fiber support shell.
</display>
<detectors>
<documentation level="5">
### Actual detectors
</documentation>
<detector
id="VertexBarrel_ID"
id="VertexBarrel_0_ID"
name="VertexBarrel"
type="athena_VertexBarrel"
readout="VertexBarrelHits"
......@@ -113,11 +140,11 @@ Simple carbon fiber support shell.
<module name="SupportShell" vis="VertexSupportVis">
<module_component name="CF Shell"
material="CarbonFiber"
sensitive="true"
sensitive="false"
width="VertexBarrelShellStave_width"
length="VertexBarrelShell_length"
thickness="VertexBarrelShell_thickness"
vis="VertexLayerVis" />
vis="VertexSupportVis" />
</module>
<comment> Layers composed of many arrayed modules </comment>
<layer module="Module1" id="1" vis="VertexLayerVis">
......@@ -125,6 +152,7 @@ Simple carbon fiber support shell.
inner_r="VertexBarrelLayer_rmin1"
outer_r="VertexBarrelLayer_rmax1"
z_length="VertexBarrelLayer_length" />
<layer_material surface="outer" binning="binPhi,binZ" bins0="VertexBarrelStave_count" bins1="100" />
<comment>
phi0 : Starting phi of first module.
phi_tilt : Phi tilt of a module.
......@@ -143,6 +171,7 @@ Simple carbon fiber support shell.
inner_r="VertexBarrelLayer_rmin2"
outer_r="VertexBarrelLayer_rmax2"
z_length="VertexBarrelLayer_length" />
<layer_material surface="outer" binning="binPhi,binZ" bins0="VertexBarrelStave_count" bins1="100" />
<rphi_layout phi_tilt="0.0*degree" nphi="VertexBarrelStave_count" phi0="0.0" rc="VertexBarrelMod2_rmin" dr="0.0 * mm"/>
<z_layout dr="0.0 * mm" z0="0.0 * mm" nz="1"/>
</layer>
......@@ -151,126 +180,106 @@ Simple carbon fiber support shell.
inner_r="VertexBarrelSupport_rmin"
outer_r="VertexBarrelSupport_rmax"
z_length="VertexBarrelSupport_length" />
<layer_material surface="outer" binning="binPhi,binZ" bins0="VertexBarrelStave_count" bins1="100" />
<rphi_layout phi_tilt="0.0*degree" nphi="VertexBarrelStave_count" phi0="0.0" rc="VertexBarrelShell_rmin" dr="0.0 * mm"/>
<z_layout dr="0.0 * mm" z0="0.0 * mm" nz="1"/>
</layer>
</detector>
<detector
id="VertexEndcapP_ID"
id="VertexEndcapP_0_ID"
name="VertexEndcapP"
type="athena_TrapEndcapTracker"
readout="VertexEndcapHits"
vis="AnlRed"
vis="TrackerVis"
reflect="false">
<support material="CarbonFiber" name="sup_cone" vis="TrackerSupportVis">
<shape type="Cone"
rmin1="VertexEndcapCone_rmin1" rmax1="VertexEndcapCone_rmin1+VertexSupportCarbon_thickness"
rmin2="VertexEndcapCone_rmin2" rmax2="VertexEndcapCone_rmin2+VertexSupportCarbon_thickness" z="VertexEndcapCone_length/2.0"/>
<position x="0*cm" y="0*cm" z="(VertexEndcapCone_zmin+VertexEndcapCone_zmax)/2.0"/>
</support>
<support material="Aluminum" name="sup_cone_service" vis="TrackerSupportVis">
<shape type="Cone"
rmin1="VertexEndcapConeService_rmin1" rmax1="VertexEndcapConeService_rmin1+VertexEndcapConeService_thickness"
rmin2="VertexEndcapConeService_rmin2" rmax2="VertexEndcapConeService_rmin2+VertexEndcapConeService_thickness" z="VertexEndcapCone_length/2.0"/>
<position x="0*cm" y="0*cm" z="(VertexEndcapCone_zmin+VertexEndcapCone_zmax)/2.0"/>
</support>
<module name="Module1" vis="AnlProcess_Blue">
<trd x1="VertexEndcapMod1_x1/2.0" x2="VertexEndcapMod1_x2/2.0" z="VertexEndcapMod1_y/2"/>
<module_component thickness="ITS3Thickness" material="Silicon" sensitive="true"/>
<module_component thickness="TrackerEndcapAluminum_thickness" material="Aluminum"/>
<module_component thickness="TrackerCarbon_thickness" material="CarbonFiber"/>
<module_component thickness="VertexEndcapAluminumThickness" material="Aluminum"/>
<module_component thickness="VertexCarbon_thickness" material="CarbonFiber"/>
</module>
<layer id="1">
<envelope vis="AnlRed"
<envelope vis="TrackerVis"
rmin="VertexTrackerEndcapP_rmin"
rmax="VertexTrackerEndcapP_rmax"
length="VertexEndcapLayer_thickness"
zstart="VertexTrackerEndcapP_zmin + VertexEndcapLayer_dz/2.0" />
<ring vis="AnlRed"
<layer_material surface="representing" binning="binPhi,binR" bins0="20*VertexEndcap_NModules" bins1="256"/>
<ring vis="TrackerVis"
r="VertexTrackerEndcapP_rmin+VertexEndcapMod1_y/2.0"
zstart="0.0"
nmodules="12" dz="2.5 * mm" module="Module1" />
nmodules="VertexEndcap_NModules" dz="VertexEndcapMod_dz" module="Module1" />
</layer>
</detector>
<detector
id="VertexEndcapN_ID"
id="VertexEndcapN_0_ID"
name="VertexEndcapN"
type="athena_TrapEndcapTracker"
readout="VertexEndcapHits"
vis="AnlRed"
vis="TrackerVis"
reflect="true">
<support material="CarbonFiber" name="sup_cone" vis="TrackerSupportVis">
<shape type="Cone"
rmin2="VertexEndcapCone_rmin1" rmax2="VertexEndcapCone_rmin1+VertexSupportCarbon_thickness"
rmin1="VertexEndcapCone_rmin2" rmax1="VertexEndcapCone_rmin2+VertexSupportCarbon_thickness" z="VertexEndcapCone_length/2.0"/>
<position x="0*cm" y="0*cm" z="-1.0*(VertexEndcapCone_zmin+VertexEndcapCone_zmax)/2.0"/>
</support>
<support material="Aluminum" name="sup_cone_service" vis="TrackerSupportVis">
<shape type="Cone"
rmin2="VertexEndcapConeService_rmin1" rmax2="VertexEndcapConeService_rmin1+VertexEndcapConeService_thickness"
rmin1="VertexEndcapConeService_rmin2" rmax1="VertexEndcapConeService_rmin2+VertexEndcapConeService_thickness" z="VertexEndcapCone_length/2.0"/>
<position x="0*cm" y="0*cm" z="-1.0*(VertexEndcapCone_zmin+VertexEndcapCone_zmax)/2.0"/>
</support>
<module name="Module1" vis="AnlProcess_Blue">
<trd x1="VertexEndcapMod1_x1/2.0" x2="VertexEndcapMod1_x2/2.0" z="VertexEndcapMod1_y/2"/>
<module_component thickness="ITS3Thickness" material="Silicon" sensitive="true"/>
<module_component thickness="TrackerEndcapAluminum_thickness" material="Aluminum"/>
<module_component thickness="TrackerCarbon_thickness" material="CarbonFiber"/>
<module_component thickness="VertexEndcapAluminumThickness" material="Aluminum"/>
<module_component thickness="VertexCarbon_thickness" material="CarbonFiber"/>
</module>
<layer id="1">
<envelope vis="AnlRed"
<envelope vis="TrackerVis"
rmin="VertexTrackerEndcapN_rmin"
rmax="VertexTrackerEndcapN_rmax"
length="VertexEndcapLayer_thickness"
zstart="VertexTrackerEndcapN_zmin + VertexEndcapLayer_dz/2.0" />
<ring vis="AnlRed"
<layer_material surface="representing" binning="binPhi,binR" bins0="20*VertexEndcap_NModules" bins1="256"/>
<ring vis="TrackerVis"
r="VertexTrackerEndcapN_rmin+VertexEndcapMod1_y/2.0"
zstart="0.0"
nmodules="12" dz="2.5 * mm" module="Module1" />
nmodules="VertexEndcap_NModules" dz="VertexEndcapMod_dz" module="Module1" />
</layer>
</detector>
<!--
<detector id="VertexEndcapP_ID"
name="VertexEndcapP"
type="athena_SimpleDiskTracker"
readout="VertexEndcapHits"
insideTrackingVolume="true"
reflect="false" vis="AnlRed">
<position x="0" y="0" z="0.0*mm"/>
<layer id="1" vis="AnlOrange"
inner_z="VertexTrackerEndcapP_zmin + 0.5*VertexTrackerEndcap_delta"
inner_r="VertexTrackerEndcapP_rmin-3*mm"
outer_r="VertexTrackerEndcapP_rmax">
<slice material="Air" thickness="1.0*mm" vis="AnlOrange" />
<slice material="Silicon" thickness="1.0*mm" vis="AnlOrange" sensitive="true"/>
<slice material="Air" thickness="1.0*mm" vis="AnlOrange" />
</layer>
<layer id="2" vis="AnlOrange"
inner_z="VertexTrackerEndcapP_zmin + 1.5*VertexTrackerEndcap_delta"
inner_r="VertexTrackerEndcapP_rmin"
outer_r="VertexTrackerEndcapP_rmax">
<slice material="Air" thickness="1.0*mm" vis="AnlOrange" />
<slice material="Silicon" thickness="1.0*mm" vis="AnlOrange" sensitive="true"/>
<slice material="Air" thickness="1.0*mm" vis="AnlOrange" />
</layer>
</detector>
<detector id="VertexEndcapN_ID"
name="VertexEndcapN"
type="athena_SimpleDiskTracker"
readout="VertexEndcapHits"
insideTrackingVolume="true"
reflect="true" vis="AnlRed">
<position x="0" y="0" z="-0.0*mm-1.0e-9*mm"/>
<layer id="1" vis="AnlOrange"
inner_z="VertexTrackerEndcapN_zmin + 0.5*VertexTrackerEndcap_delta"
inner_r="VertexTrackerEndcapN_rmin"
outer_r="VertexTrackerEndcapN_rmax">
<slice material="Air" thickness="1.0*mm" vis="AnlOrange" />
<slice material="Silicon" thickness="1.0*mm" vis="AnlOrange" sensitive="true"/>
<slice material="Air" thickness="1.0*mm" vis="AnlOrange" />
</layer>
<layer id="2" vis="AnlOrange"
inner_z="VertexTrackerEndcapN_zmin + 1.5*VertexTrackerEndcap_delta"
inner_r="VertexTrackerEndcapN_rmin"
outer_r="VertexTrackerEndcapN_rmax">
<slice material="Air" thickness="1.0*mm" vis="AnlOrange" />
<slice material="Silicon" thickness="1.0*mm" vis="AnlOrange" sensitive="true"/>
<slice material="Air" thickness="1.0*mm" vis="AnlOrange" />
</layer>
</detector>
-->
</detectors>
<readouts>
<readout name="VertexBarrelHits">
<segmentation type="CartesianGridXY" grid_size_x="0.010*mm" grid_size_y="0.010*mm" />
<id>system:8,barrel:2,layer:4,module:12,sensor:2,x:32:-16,y:-16</id>
<id>system:8,layer:4,module:12,sensor:2,x:32:-16,y:-16</id>
</readout>
<readout name="VertexEndcapHits">
<segmentation type="CartesianGridXZ" grid_size_x="0.20*mm" grid_size_z="0.20*mm" />
<id>system:8,barrel:2,layer:4,module:12,sensor:2,x:32:-16,z:-16</id>
<segmentation type="CartesianGridXZ" grid_size_x="0.010*mm" grid_size_z="0.010*mm" />
<id>system:8,layer:4,module:12,sensor:2,x:32:-16,z:-16</id>
</readout>
</readouts>
......
compact/vertex_tracker_3layers.xml 0 → 100644
View file @ 1008a184
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<define>
<comment>
Main parameters
</comment>
<constant name="SiVertexSensor_thickness" value="40*um"/>
<constant name="VertexBarrelMod_length" value="280.0*mm"/>
<constant name="VertexBarrelMod_rmin" value="3.3*cm"/>
<constant name="VertexBarrelMod_offset" value="1.05*cm"/>
<constant name="VertexBarrelMod_count" value="3"/>
<constant name="VertexBarrelShell_thickness" value="300.0*um"/>
<documentation>
#### Vertex Tracker Barrel Parameters
- The sensor modules are 2 half-cylinders.
- There are 2 sensitive layers
- Each sensor has a thickness is 40um
- There is an outer shell for structural support 300um thick.
- The ID of this shell is set (arbitrarily) to 10 cm.
##### Sensor layers
Currently there are 2 sensor layers. Each is composed of 2 half-cylinders modules with only 40um of silicon thickness.
##### Support shell
Simple carbon fiber support shell.
</documentation>
<constant name="VertexBarrelEnvelope_length" value="VertexTrackingRegion_length"/>
<constant name="VertexBarrelLayer_length" value="VertexBarrelMod_length + 1*um"/>
<constant name="VertexBarrelLayer_thickness" value="0.2*cm"/>
<constant name="VertexBarrelMod_thickness" value="0.1*cm"/>
<constant name="VertexBarrelMod1_rmin" value="VertexBarrelMod_rmin"/>
<constant name="VertexBarrelMod2_rmin" value="VertexBarrelMod_rmin + 1 * VertexBarrelMod_offset"/>
<constant name="VertexBarrelMod3_rmin" value="VertexBarrelMod_rmin + 2 * VertexBarrelMod_offset"/>
<constant name="VertexBarrelLayer1_rmin" value="VertexBarrelMod_rmin - VertexBarrelLayer_thickness/2.0"/>
<constant name="VertexBarrelLayer1_rmax" value="VertexBarrelLayer1_rmin + VertexBarrelLayer_thickness"/>
<constant name="VertexBarrelLayer2_rmin" value="VertexBarrelLayer1_rmin + 1 * VertexBarrelMod_offset"/>
<constant name="VertexBarrelLayer2_rmax" value="VertexBarrelLayer2_rmin + VertexBarrelLayer_thickness"/>
<constant name="VertexBarrelLayer3_rmin" value="VertexBarrelLayer1_rmin + 2 * VertexBarrelMod_offset"/>
<constant name="VertexBarrelLayer3_rmax" value="VertexBarrelLayer3_rmin + VertexBarrelLayer_thickness"/>
<comment>
"Support" is to "shell" like "layer" is to "module", and is need for the flat stave barrel implementation.
</comment>
<constant name="VertexBarrelShell_rmin" value="VertexBarrelMod_rmin + VertexBarrelMod_count * VertexBarrelMod_offset"/>
<constant name="VertexBarrelShell_rmax" value="VertexBarrelShell_rmin + VertexBarrelShell_thickness"/>
<constant name="VertexBarrelShell_length" value="VertexBarrelMod_length"/>
<constant name="VertexBarrelSupport_thickness" value="0.1*cm"/>
<constant name="VertexBarrelSupport_rmin" value="VertexBarrelShell_rmin-VertexBarrelSupport_thickness/2.0"/>
<constant name="VertexBarrelSupport_rmax" value="VertexBarrelSupport_rmin + VertexBarrelSupport_thickness"/>
<constant name="VertexBarrelSupport_length" value="VertexBarrelLayer_length"/>
<comment>
Extra parameters to approximate a cylinder as a set of skinny staves
due to ACTS limitations.
</comment>
<constant name="VertexBarrelStave_count" value="128"/>
<constant name="VertexBarrelStave1_width" value="2*VertexBarrelMod1_rmin * tan(180*degree/VertexBarrelStave_count)"/>
<constant name="VertexBarrelStave2_width" value="2*VertexBarrelMod2_rmin * tan(180*degree/VertexBarrelStave_count)"/>
<constant name="VertexBarrelStave3_width" value="2*VertexBarrelMod3_rmin * tan(180*degree/VertexBarrelStave_count)"/>
<constant name="VertexBarrelShellStave_width" value="2*VertexBarrelShell_rmin * tan(180*degree/VertexBarrelStave_count)"/>
</define>
<display>
</display>
<detectors>
<documentation level="5">
### Actual detectors
</documentation>
<detector
id="VertexBarrel_0_ID"
name="VertexBarrel"
type="athena_VertexBarrel"
readout="VertexBarrelHits"
insideTrackingVolume="true">
<dimensions
rmin="VertexBarrelLayer1_rmin"
rmax="VertexBarrelSupport_rmax"
length="VertexBarrelEnvelope_length" />
<comment>Vertex Barrel Modules</comment>
<module name="Module1" vis="VertexLayerVis">
<module_component name="ITS3"
material="Silicon"
sensitive="true"
width="VertexBarrelStave1_width"
length="VertexBarrelMod_length"
thickness="SiVertexSensor_thickness"
vis="VertexLayerVis" />
</module>
<module name="Module2" vis="VertexLayerVis">
<module_component name="ITS3"
material="Silicon"
sensitive="true"
width="VertexBarrelStave2_width"
length="VertexBarrelMod_length"
thickness="SiVertexSensor_thickness"
vis="VertexLayerVis" />
</module>
<module name="Module3" vis="VertexLayerVis">
<module_component name="ITS3"
material="Silicon"
sensitive="true"
width="VertexBarrelStave3_width"
length="VertexBarrelMod_length"
thickness="SiVertexSensor_thickness"
vis="VertexLayerVis" />
</module>
<module name="SupportShell" vis="VertexSupportVis">
<module_component name="CF Shell"
material="CarbonFiber"
sensitive="false"
width="VertexBarrelShellStave_width"
length="VertexBarrelShell_length"
thickness="VertexBarrelShell_thickness"
vis="VertexSupportVis" />
</module>
<comment> Layers composed of many arrayed modules </comment>
<layer module="Module1" id="1" vis="VertexLayerVis">
<barrel_envelope
inner_r="VertexBarrelLayer1_rmin"
outer_r="VertexBarrelLayer1_rmax"
z_length="VertexBarrelLayer_length" />
<layer_material surface="outer" binning="binPhi,binZ" bins0="VertexBarrelStave_count" bins1="100" />
<comment>
phi0 : Starting phi of first module.
phi_tilt : Phi tilt of a module.
rc : Radius of the module center.
nphi : Number of modules in phi.
rphi_dr : The delta radius of every other module.
z0 : Z position of first module in phi.
nz : Number of modules to place in z.
dr : Radial displacement parameter, of every other module.
</comment>
<rphi_layout phi_tilt="0.0*degree" nphi="VertexBarrelStave_count" phi0="0.0" rc="VertexBarrelMod1_rmin" dr="0.0 * mm"/>
<z_layout dr="0.0 * mm" z0="0.0 * mm" nz="1"/>
</layer>
<layer module="Module2" id="2" vis="VertexLayerVis">
<barrel_envelope
inner_r="VertexBarrelLayer2_rmin"
outer_r="VertexBarrelLayer2_rmax"
z_length="VertexBarrelLayer_length" />
<layer_material surface="outer" binning="binPhi,binZ" bins0="VertexBarrelStave_count" bins1="100" />
<rphi_layout phi_tilt="0.0*degree" nphi="VertexBarrelStave_count" phi0="0.0" rc="VertexBarrelMod2_rmin" dr="0.0 * mm"/>
<z_layout dr="0.0 * mm" z0="0.0 * mm" nz="1"/>
</layer>
<layer module="Module3" id="3" vis="VertexLayerVis">
<barrel_envelope
inner_r="VertexBarrelLayer3_rmin"
outer_r="VertexBarrelLayer3_rmax"
z_length="VertexBarrelLayer_length" />
<layer_material surface="outer" binning="binPhi,binZ" bins0="VertexBarrelStave_count" bins1="100" />
<rphi_layout phi_tilt="0.0*degree" nphi="VertexBarrelStave_count" phi0="0.0" rc="VertexBarrelMod3_rmin" dr="0.0 * mm"/>
<z_layout dr="0.0 * mm" z0="0.0 * mm" nz="1"/>
</layer>
<layer module="SupportShell" id="VertexBarrelMod_count + 1" vis="VertexSupportLayerVis">
<barrel_envelope
inner_r="VertexBarrelSupport_rmin"
outer_r="VertexBarrelSupport_rmax"
z_length="VertexBarrelSupport_length" />
<layer_material surface="outer" binning="binPhi,binZ" bins0="VertexBarrelStave_count" bins1="100" />
<rphi_layout phi_tilt="0.0*degree" nphi="VertexBarrelStave_count" phi0="0.0" rc="VertexBarrelShell_rmin" dr="0.0 * mm"/>
<z_layout dr="0.0 * mm" z0="0.0 * mm" nz="1"/>
</layer>
</detector>
</detectors>
<readouts>
<readout name="VertexBarrelHits">
<segmentation type="CartesianGridXY" grid_size_x="0.010*mm" grid_size_y="0.010*mm" />
<id>system:8,layer:4,module:12,sensor:2,x:32:-16,y:-16</id>
</readout>
</readouts>
</lccdd>
scripts/view1/generate_eps
View file @ 1008a184
......@@ -62,7 +62,7 @@ pdftoppm ${FILE_TAG}.pdf ${FILE_TAG} -png -singlefile -cropbox -thinlinemode sol
#dawncut 0 -1 0 1 ${INPUT_FILE} ${FILE_TAG}.prim
dawncut 0 1 0 1 ${INPUT_FILE} ${FILE_TAG}_temp0.prim
dawncut 0 -1 0 1 ${FILE_TAG}_temp0.prim ${FILE_TAG}.prim
../../bin/dawn_tweak --mag 10 --draw 1 --theta 270 --phi 90
../../bin/dawn_tweak --mag 10 --draw 1 --theta 90 --phi 90
dawn -d ${FILE_TAG}.prim
ps2pdf ${FILE_TAG}.eps ${FILE_TAG}_top_full.pdf
gs -o ${FILE_TAG}_top.pdf -sDEVICE=pdfwrite \
......
scripts/view11/.DAWN_1.history 0 → 100644
View file @ 1008a184
1.34392e+07
90
180
0
0
0
25000
2.0
1
0.001
0
1
1
1
0.5
0.5
0.5
19
71
0.001
0.001
0.001
3
71
0.001
0
0
1
evince
0
0
scripts/view12/.DAWN_1.history 0 → 100644
View file @ 1008a184
1.34392e+07
0
180
0
0
0
0
8
1
0.001
0
1
1
1
0.5
0.5
0.5
19
71
0.01
0.01
0.01
3
70
0.01
1
1
1
evince
0
0
scripts/view12/generate_eps
View file @ 1008a184
......@@ -66,17 +66,6 @@ set -- "${POSITIONAL[@]}" # restore positional parameters
echo "view12 produces a series of slightly rotated XY slices a different z locations. Along beamline"
# slice at z = 2m
# note the offset has to change with sign of the direction to cut in the opposite direction.
dawncut 0 0 1 2005 ${INPUT_FILE} ${FILE_TAG}b_temp0.prim
dawncut 0 0 -1 -2000 ${FILE_TAG}b_temp0.prim ${FILE_TAG}b.prim
dawn -d ${FILE_TAG}b.prim
ps2pdf ${FILE_TAG}b.eps ${FILE_TAG}b_full.pdf
gs -o ${FILE_TAG}b.pdf -sDEVICE=pdfwrite \
-c "[/CropBox [50 175 550 675] /PAGES pdfmark" \
-f ${FILE_TAG}b_full.pdf
pdftoppm ${FILE_TAG}b.pdf ${FILE_TAG}b -png -singlefile -cropbox
original_file_tag="${FILE_TAG}"
make_slice(){
......
scripts/view13/generate_eps
View file @ 1008a184
......@@ -9,7 +9,7 @@ function print_the_help {
exit
}
FILE_TAG="view2"
FILE_TAG="view13"
INPUT_FILE="g4_0000.prim"
......
scripts/view14/.DAWN_1.history 0 → 100644
View file @ 1008a184
0.0
72.5
189.5
0
0
0
1500
55
3
0.001
0
1
1
1
0.5
0.5
0.5
25.5
71
0.001
0.001
0.001
1
70
0.001
1
0
1
evince
0
0